Can I drive after passing Subject 3?

2 Answers
MaliaRose
09/08/25 6:02am
You cannot drive on the road after passing Subject 3 because you have not yet obtained your driver's license. Precautions for not having a driver's license: If you don't have your driver's license yet, you must not drive on the road. If caught by traffic police, it will be considered unlicensed driving, resulting in fines or even detention. In severe cases, your yet-to-be-obtained license could be revoked. After obtaining your license, there is a one-year probation period. During this period, you must display a probation sign at the back of your car when driving. Rules to follow during Subject 3 test: When taking the Subject 3 test, you must adhere to traffic rules and properly use the lighting system. Many candidates fail the Subject 3 test due to non-compliance with traffic rules and improper use of lights. After getting into the car, do not forget to fasten your seatbelt. Subject 3 is conducted on open roads.
Was this review help?
14
4
Share
LeElliott
09/20/25 4:37am
I remember after passing the third driving test last year, I was over the moon, thinking I could finally drive on the road. But the reality is, that's simply not possible! In China's driver's license examination, the third test is just a preliminary assessment of road driving skills. After that, you still need to take the fourth test, which is the safety and civilization knowledge exam. Only after completing all tests and obtaining the driver's license certificate do you have the legal qualification to drive. Otherwise, driving without a license is illegal. If caught, not only will you face fines starting from several hundred yuan, but your vehicle may also be impounded, and you could be held responsible for any accidents. I almost impulsively tried driving a friend's car back then, but fortunately, my wife stopped me in time. Actually, this process is designed to protect beginners, preventing risks caused by lack of experience. It's advisable to prepare for the fourth test materials immediately after passing the third test. The exam can usually be scheduled within a few days, and you can get your license on the same day if you pass. Only after obtaining that little card can you truly drive safely and freely on the road. Be patient, don't rush—everything is for the sake of safety.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Does the Buick Regal use 92 or 95 gasoline?

The Buick Regal 1.5T model uses 92-octane gasoline, while the 2.0T model uses 95-octane gasoline. Only when the octane rating of the gasoline meets the engine's compression ratio requirements can the vehicle's power and fuel efficiency be fully utilized. You can check the car's user manual, which specifies the required fuel grade. Here is some information about gasoline: 1. The gasoline grade represents the octane rating of the fuel. The higher the grade, the higher the octane rating, indicating better anti-knock performance. Better anti-knock performance ensures smoother engine operation, reduces wear, and provides better engine protection. 2. If a high-compression engine uses low-grade gasoline, incomplete combustion may occur, leading to severe engine vibration, reduced power output, engine damage, increased fuel consumption, and poor driving performance. Conversely, if a low-compression engine uses high-grade gasoline, delayed combustion may occur, meaning the fuel does not reach its auto-ignition point at maximum compression, also resulting in incomplete combustion. This requires additional fuel injection to ensure power output, which not only offers no benefit to the engine but also increases fuel consumption.
7
1
Share

Does the A6 belong to the B-segment car?

Audi A6 does not belong to the B-segment car; it is classified as a C-segment car. This classification of cars was invented by Volkswagen as part of their platform strategy, establishing a set of reference values. This classification method is not a globally unified standard, but China has consistently adopted this standard. The information regarding car classification levels is as follows: 1. According to Volkswagen's classification method, car levels are generally (from low to high): A00-segment, A0-segment, A-segment, B-segment, C-segment, and D-segment, corresponding to micro cars, subcompact cars, compact cars, midsize cars, full-size cars, and luxury cars, respectively. 2. C-segment premium passenger cars typically have a wheelbase ranging from approximately 2.8 meters to 3.0 meters, with engine displacements between 2.3 liters and 3.0 liters. Well-known C-segment cars in China include the Audi A6, BMW 5 Series, and Mercedes-Benz E-Class. 3. The classification of vehicle segments is not based on a single data point but rather a comprehensive consideration of various factors such as body dimensions, vehicle price, power, engine displacement, etc.
4
4
Share

Where is the Mazda 5 Cabin Air Filter Located?

The Mazda 5 cabin air filter is located near the left foot of the front passenger seat. Open a triangular cover panel to access it, which consists of upper and lower filter elements. The glove compartment needs to be pressed down to see it. The replacement interval for the cabin air filter is generally every 12,000 kilometers. The steps to replace the Mazda 5 cabin air filter are as follows: 1. The cabin air filter is usually installed behind the glove compartment on the front passenger side. To replace it, first open the glove compartment lid. 2. Locate the fixing clip on the right side of the glove compartment and pull it outward firmly. Remove the fixing clip of the glove compartment lid to detach it. 3. Squeeze both sides of the glove compartment toward the center with both hands, and the glove compartment can then be removed. 4. Once the glove compartment is removed, you can see the cabin air filter cover panel. Press firmly on the fixing clips on both sides of the cover panel, and the panel can be removed. 5. Pull the old cabin air filter outward. Install the new cabin air filter and reassemble in the reverse order of disassembly to restore it to its original position.
4
2
Share

What Happens When the Clutch Three-Piece Set Has Problems?

When the clutch three-piece set has problems, it may produce abnormal noises, lack of driving power, and even emit a burning smell or smoke. Here are the related details: 1. Abnormal Noises: When you notice unusual sounds from the clutch, such as different noises during clutch engagement or disengagement when pressing the pedal, a light press may produce a rustling sound from the bearing. If the noise persists when accelerating, it indicates bearing damage. A collision-like sound suggests the release bearing is moving abnormally. 2. Lack of Driving Power: When starting the vehicle in low gear, releasing the clutch may result in difficulty or inability to start. During acceleration, the engine RPM increases, but the vehicle speed does not rise, showing a lack of power. A burning smell or smoke may also occur. 3. Burning Smell or Smoke: Even at idle, a burning smell or smoke may appear. Gear shifting becomes difficult, and after shifting, releasing the clutch causes the vehicle to move, indicating incomplete clutch disengagement.
8
1
Share

How to reset the TPMS light on a JAC vehicle?

The method to reset the TPMS light on a JAC vehicle is: Locate the tire pressure reset button labeled SET below the left side of the steering wheel, press and hold it for several seconds until the tire pressure warning light turns off, indicating a successful reset. The TPMS light may illuminate due to a malfunction in the tire pressure monitoring system, so it's advisable to check if the tires are underinflated. JAC is a comprehensive automotive enterprise group that integrates the R&D, production, and sales of a full range of commercial vehicles, passenger vehicles, and powertrains, covering numerous sectors such as automotive mobility and financial services. Its vehicle models include the Refine S3, Refine M6, Refine M5, Heyue 2014, Heyue A30, among others. Taking the Refine S3 as an example, it is a new urban compact SUV produced by JAC, with dimensions of 4345mm in length, 1765mm in width, and 1640mm in height, a wheelbase of 2560mm, powered by a 4GB1.5L engine, and paired with either a 6MT or CVT transmission.
9
1
Share

Where is the Nissan impact sensor located?

The Nissan impact sensor is installed on the inner side of the front fenders on both sides of the vehicle body. Specific locations of Nissan impact sensors: For the collision severity sensors, one impact sensor is installed on the left front and right front parts of the vehicle body respectively, known as the left front impact sensor and the right front impact sensor. The sensor located at the central front part of the vehicle body is called the central impact sensor. As for the protective impact sensors, they are generally installed together with the SRS computer, located under the decorative panel around the central gear shift lever in the cabin. Impact sensors: They are the control signal input devices in the airbag system. Their function is to detect the intensity signal of a vehicle collision when it occurs and input the signal into the airbag computer, which then determines whether to inflate the airbag based on the sensor's signal. Most impact sensors adopt an inertial mechanical switch structure, functioning like a control switch, with their operational state depending on the magnitude of acceleration during a collision. Based on structure, they can be divided into mechanical and electronic types. Mechanical types include ball-type, roller-type, and eccentric ball-type.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.