Can I do the first maintenance before reaching 5,000 kilometers?

1 Answers
HadleyLynn
07/29/25 3:39pm
You can perform the first maintenance before reaching 5,000 kilometers. The most important driving principles for a new car are as follows: 1. Avoid pressing the accelerator pedal too hard: This allows components like pistons and cylinders, as well as other engine parts, to gradually increase their load under moderate conditions, preventing damage. 2. Driving speed: During the break-in period, the best way to drive is at a moderate speed with slightly less fuel intake. Particularly, avoid pressing the accelerator pedal hard at low RPMs, as this not only wastes fuel but also increases wear on pistons and cylinders. 3. Avoid sudden braking: When braking, try to decelerate in advance or use intermittent braking, and avoid sudden stops whenever possible. Proper maintenance during the break-in period can save you a lot of trouble in the future.
Was this review help?
8
0
Share
More Forum Discussions

What does it mean when a Volkswagen displays a tire pressure loss warning?

When a Volkswagen displays a tire pressure loss warning, it indicates an issue with the tire pressure, causing the pressure sensor to detect an abnormality. In this case, the tires need to be checked. When the tire pressure monitoring system detects insufficient pressure in one or more of the vehicle's tires, a warning light will illuminate on the dashboard along with a text alert to notify the driver. There's no need to panic in this situation. As long as the tire isn't damaged, the vehicle can usually still be driven. If the alarm goes off while driving, avoid slamming on the brakes, as sudden braking could cause a tire blowout. Instead, gradually reduce speed and pull over safely. If there are vehicles behind you, turn on the hazard warning lights to alert them. Then, exit the vehicle and inspect all four tires for any issues. If a problem is found, call for roadside assistance immediately. Additionally, avoid overloading the trunk with too many items. Excessive vehicle weight can also trigger the tire pressure monitoring system to detect low pressure, as the added weight reduces tire pressure. Prolonged driving in this state can eventually damage the tires.
7
3
Share

Which Consumes More Fuel: National Highways or Expressways?

Driving on national highways consumes more fuel than driving on expressways. Here are the specific details about fuel consumption: 1. Expressways: Expressways are generally "straighter," meaning the driving distance is shorter compared to national highways, which naturally reduces the vehicle's fuel consumption. 2. National Highways: The main cost of driving on national highways lies in fuel consumption. Firstly, national highways are more prone to traffic congestion. Once stuck in traffic, frequent braking and acceleration are unavoidable, leading to a sharp increase in fuel consumption. If passing through areas with dense traffic lights, fuel consumption will inevitably spike. Additionally, national highways often have more winding routes, which indirectly increases the driving distance and results in higher fuel consumption. 3. Speed: The maximum speed limit on expressways is 120 km/h. If the average speed is 100 km/h, a 100-kilometer journey takes one hour. The speed limits on national highways are completely different, typically around 60-70 km/h, and in some areas with poor road conditions, the limit may drop to 40 km/h. Due to the complex road surfaces on many national highways, speeds are not very high. If the average speed is 50 km/h, a 100-kilometer journey would take two hours.
13
5
Share

Is the replacement windshield as good as the original?

The original is better. If the replacement is an OEM windshield, it will definitely be identical to the original. However, if a brand-name windshield is used, it may not match the quality of the original. As long as the windshield does not cause visual distortion while driving, there should be no issues. Maintenance tips for the windshield are as follows: 1. Regularly inspect the wipers: Wipers are one of the main sources of windshield damage. Over time, wipers can age, and if the wiper arm directly rubs against the windshield, it may not only fail to clean rainwater effectively but also scratch the glass. Additionally, dust adhering to the wipers can cause small scratches and fine lines on the windshield. 2. Clean the windshield properly: Always use designated windshield washer fluid, which contains components that dissolve grease and maintain the glass. Avoid using the wipers to remove obstacles like snow, ice, mud clumps, or hardened bird droppings, as this can damage the wiper blades, wiper motor, and the glass itself.
4
5
Share

How Many Days Does It Take for a Beginner to Master the Clutch?

This depends on individual comprehension; some may take just one day, while others may need several days. Here are some precautions for beginners when using the clutch: 1. Press the clutch all the way down: Fully depressing the clutch avoids prolonged semi-engagement, ensuring complete separation and preventing wear. 2. Always shift gears only when the clutch is fully depressed: When pressing the clutch, release the accelerator. If shifting is not smooth, first release the clutch, press it again, and then shift—never force a gear change. 3. Press the clutch at the right time: In lower gears, beginners may experience jerky acceleration or deceleration, especially when following traffic in congested areas. In such cases, pressing the clutch at the right moment ensures smoother driving. 4. Avoid unnecessary clutch use: Beginners often rest their foot on the clutch, frequently engaging and disengaging it, which accelerates wear on the clutch friction disc and pressure plate. Except for shifting gears and low-speed braking, there’s no need to keep pressing the clutch at other times.
2
3
Share

What Does Paint Spraying and Polishing Mean?

Automobile paint spraying is the process of repainting, applying a layer of paint to the car's surface to protect it; polishing involves removing dirt and imperfections from the original paint surface. Color selection for paint spraying: When repainting a vehicle, it's important to mix the paint correctly because over time, the car's color fades, and the new paint must match the body color. Repairing paint based on specific damage: For small paint damages, such as tiny dots, a dedicated touch-up pen can be used to apply a small amount of paint. This avoids rust formation, is less noticeable, and doesn't require extensive repainting. For minor scratches, like those from tree branches or car washing, applying car wax several times can usually reduce or eliminate the visibility of the scratches. If the vehicle has noticeable scrapes or the paint is chipped down to the primer, immediate repair is necessary. Otherwise, the metal can easily rust, leading to extensive corrosion over time, which significantly impacts the car's appearance.
15
5
Share

Why does the car feel sluggish when the air conditioning is on?

When the air conditioning is turned on, the compressor starts, and the engine needs to drive the compressor to work, which inevitably consumes power. This is equivalent to a reduction in the car's driving power, making the car feel sluggish, which is normal. Introduction to car air conditioning: Car air conditioning consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components. It is an air conditioning system used to regulate the temperature and humidity inside the car, providing a comfortable environment for the driver. How air conditioning works: When the compressor is working, it sucks in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the temperature and pressure of the refrigerant increase, and it is sent to the condenser. Inside the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser and liquefies, turning into a liquid. The liquid refrigerant flows through the throttle device, where its temperature and pressure decrease, and it enters the evaporator. Inside the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the inside air passing through the evaporator and evaporates, turning into a gas. The gas is then sucked back into the compressor for the next cycle.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.