Can I directly apply for an A3 driver's license?

1 Answers
DeHenry
07/25/25 9:30pm
According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses", an A3 driver's license can be directly applied for during the initial application. However, certain conditions must be met to apply for an A3 driver's license, such as being at least 21 years old, having a height of at least 155cm, and having a naked or corrected vision of at least 5.0. Below are the examination items for the A3 driver's license: 1. The A3 driver's license examination consists of Subject 1, Subject 2, and Subject 3. 2. Subject 1 tests knowledge of traffic regulations, traffic signals, driver's license usage, and local adaptive regulations. 3. Subject 2 is a field skills test, which includes pole parking, slope positioning, parallel parking, single-plank bridge, curve driving, right-angle turns, passing through width-restricted gates, passing through continuous obstacles, driving on uneven roads, narrow road U-turns, simulated highways, simulated continuous sharp mountain roads, simulated tunnels, driving on slippery roads, and emergency handling. 4. Subject 3 is the road test, which includes preparation before driving, starting, driving straight, gear shifting, lane changing, pulling over, going straight through intersections, turning at intersections, passing through zebra crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, U-turns, and night driving.
Was this review help?
10
4
Share
More Forum Discussions

Why doesn't my 12123 show the option for license renewal upon expiration?

It might be due to the physical examination requirement. For driver's license renewal upon expiration, a physical examination must be completed before applying. Below are specific details regarding expired motor vehicle driver's licenses: 1. Renewal within one year of expiration: According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' if the renewal or physical examination deadline is exceeded by less than one year, the license is considered overdue but not yet invalid. The driver can submit their ID card, expired driver's license, and a medical certificate from a county-level or higher medical institution (or a military medical institution at the regiment level or above) to the vehicle management office to process the renewal without taking any subject exams. 2. Renewal between one and three years of expiration: The driver must take the subject one exam at the vehicle management office. Upon passing the exam, they can proceed with the normal renewal process.
15
3
Share

How Heavy is a Car Battery?

Car batteries come in various types, and their weights differ based on capacity. For example: 1.5Ah (Ah stands for ampere-hour, the unit of battery capacity), 12.5Kg (approximately 8.5Kg when not filled with electrolyte); 55Ah, 15.0Kg; 60Ah, 17.5Kg (approximately 12Kg when not filled with electrolyte); 70Ah, 18.0Kg; 80Ah, 20.0Kg (approximately 14.5Kg when not filled with electrolyte); 110Ah, 24.5Kg. Here's an extended introduction: Car Battery: Also known as a storage battery, it is a type of battery that works by converting chemical energy into electrical energy. Typically, when people refer to a car battery, they mean a lead-acid battery. This is a type of battery primarily made of lead and its oxides, with sulfuric acid solution as the electrolyte.
16
4
Share

Types and Functions of Car Window Films

There are four main types of car window films: coated and composite process films, dyed films, vacuum thermal evaporation films, and metal magnetron sputtering films. The functions of each type are as follows: 1. Coated and composite process films: Their primary function is to block intense sunlight. These films are early-stage products and basically do not provide heat insulation. They were initially called sun paper or tea paper. 2. Dyed films: Most dyed car films on the market use deep-dyeing technology, which involves adding heat absorbers through deep-dyeing to absorb infrared rays from sunlight for heat insulation. However, since they also absorb visible light, the visible light transmittance is insufficient, and their clarity is poor due to technological limitations. Another major weakness is that their heat insulation function degrades quickly, and they are prone to fading, though they are relatively cheaper. 3. Vacuum thermal evaporation films: These use vacuum thermal evaporation technology to evaporate an aluminum layer onto the substrate for heat insulation. These are typically referred to as metal films, offering long-lasting heat insulation. However, their clarity is not high, affecting visual comfort, and another major drawback is their high reflectivity. 4. Metal magnetron sputtering films: As of 2018, these represent the highest technology in glass films, developed in the late 1990s after multiple technological innovations. The magnetron sputtering process involves using advanced multi-chamber high-speed rotating equipment to uniformly sputter high-grade aerospace alloy materials like nickel, silver, titanium, and gold onto high-tension PET substrates with high speed and force, based on electric and magnetic field principles. Products made with magnetron sputtering technology not only have excellent metallic texture and stable heat insulation performance but also achieve clarity, low reflectivity, and long-lasting color that other processes cannot match.
10
4
Share

Will the car floor rust if it gets wet?

Yes, it will rust. Introduction to the effects of water entering the car floor: 1. Vehicle rust and corrosion: Water entering the vehicle will corrode the floor and metal components, causing floor damage and metal parts to rust, significantly increasing the probability of vehicle failure and threatening the safety of the driver. 2. Vehicle circuit short circuit: If the water in the vehicle is not treated in time, the accumulated water may cause short circuits in some circuits on the floor. When starting the vehicle, it is easy to affect the normal driving of the vehicle due to the short circuit, and even burn out the vehicle's computer, causing vehicle failure. 3. Vehicle odor: If the water is not removed and dried in time after entering the vehicle, the remaining water will corrode the vehicle floor and cause the floor mats to mold and deteriorate, which will emit unpleasant odors and create vehicle odor.
4
1
Share

What are the reasons for a car battery having power but no response when starting?

The reasons for having power but no response when starting include the following: 1. Starter damage: (1) Symptom 1: No response when turning to START. The starter electromagnetic switch is damaged. (2) Symptom 2: A "click" sound is heard when turning to START, but the starter does not rotate. The main contacts of the starter electromagnetic switch are damaged, or the starter winding is damaged. (3) Symptom 3: A "click" sound is heard when turning to START, and the starter rotates at high speed. The starter one-way clutch is damaged. 2. Engine ignition system failure: The symptom is that when turning to START, the engine can be rotated (100r/min), but the engine does not start. Unplug the high-voltage wire (or ignition coil), and there is no spark when turning to START. 3. Engine fuel supply system failure: When in the IG position, the "buzzing" sound of the fuel pump working in the fuel tank area cannot be heard.
7
3
Share

Is the Car Dashboard Afraid of Sun Exposure?

Different materials of car dashboards have varying degrees of resistance to sun exposure as follows: 1. Hard plastic material: Under sunlight, it easily produces refraction, which can affect the driver's vision. If exposed to the sun for a long time, high temperatures may cause the hard plastic material to release some harmful gases, which are not good for the human body, and may even lead to cracking and aging. 2. Plastic material: Prolonged exposure to the sun may cause cracking, as the thermal expansion and contraction coefficients of the inner and outer layers are inconsistent, leading to cracks over time. 3. Soft-touch material: Made of PC polyacetate, it can withstand high temperatures up to 130 degrees without deformation, so it is generally not a problem. The surface of soft-touch material is not very smooth, providing a certain tactile feel, and light will be diffusely reflected on it.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.