Can I directly apply for a B2 driver's license for the first time?

1 Answers
StCalvin
07/30/25 4:31am
A B2 driver's license can be applied for directly for the first time, but it can only be obtained at the local vehicle management office in the applicant's registered residence. Article 13 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123): For first-time applicants of a motor vehicle driver's license, the following vehicle types can be applied for: city buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, small automatic transmission passenger cars for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. For first-time applicants of a motor vehicle driver's license in a temporary residence, the following vehicle types can be applied for: small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, small automatic transmission passenger cars for the disabled, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles. A B2 driver's license allows the holder to drive heavy-duty trucks and medium-duty trucks. A heavy-duty truck is defined as a truck with a length of 6 meters or more and a total mass of 12,000 kg or more. A medium-duty truck is defined as a truck with a length of 6 meters or more and a total mass of 4,500 kg or more but less than 12,000 kg. In other words, it allows the holder to drive all trucks except for tractors. B2 driver's license application requirements: Age between 20-60 years old, height requirement of 1.55 meters or more for large vehicles. Applicants must study in their registered residence (within the prefecture-level city) and cannot study in a temporary residence. If the original driver's license is from another region, it must be transferred back to the original place of residence for study. Naked or corrected vision must reach 5.0 or above on the logarithmic visual acuity chart, and the applicant must not be colorblind. The applicant must either apply for the license for the first time or have held any driver's license for at least one year. Additionally, there must be no traffic violation record with 12 or more points within the past year. Local residents must apply in their registered residence. Non-local residents can apply in their temporary residence. Active military personnel (including armed police) must apply in their place of residence. Foreign nationals must apply in their place of residence or stay. Those who cannot apply for a B2 driver's license include: Individuals who have caused a traffic accident resulting in death and bear equal or greater responsibility. Individuals who have driven under the influence of alcohol. Individuals whose driver's license has been revoked or canceled for less than ten years. B2 driver's license examination items: Subject 1 examination content includes: road traffic rules, traffic signals, handling of traffic safety violations and accidents, regulations on the application and use of motor vehicle driver's licenses, motor vehicle registration, and other road traffic safety laws, regulations, and rules. Subject 2 examination content includes: large truck examination items such as stake test, hill start, parallel parking, single-plank bridge, curve driving, right-angle turn, narrow gate, continuous obstacles, bumpy road, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. Subject 3 road driving skills examination content includes: large truck examination items such as vehicle preparation, starting, straight-line driving, gear shifting, lane changing, roadside parking, straight through intersections, left turns, right turns, pedestrian crossings, school zones, bus stops, meeting vehicles, overtaking, U-turns, and night driving. The examination distance for large trucks must be no less than 10 kilometers, including at least 5 kilometers during the day and 3 kilometers at night. For large trucks, provincial public security traffic management departments may add complex road driving examination content such as mountain roads, tunnels, and steep slopes based on actual conditions. Subject 4 safe and civilized driving knowledge examination content includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for tire blowouts and other emergencies, and knowledge on handling traffic accidents.
Was this review help?
13
3
Share
More Forum Discussions

What Impact Will a Faulty Camshaft Position Sensor Cause?

The impacts caused by a faulty camshaft position sensor include: 1. After the camshaft position sensor fails, the ECU cannot detect changes in the camshaft's position, affecting the intake and exhaust system's air intake and exhaust volume, thereby impacting engine performance; 2. A faulty camshaft position sensor causes the computer to spray fuel disorderly, resulting in increased fuel consumption, misfires, and inability to reach higher RPMs; 3. The camshaft position sensor determines the ignition sequence. If it fails, it causes ignition issues, making the engine difficult to start. The function of the camshaft position sensor in a vehicle is to collect the position signal of the valve camshaft and input it to the ECU, enabling the ECU to identify the top dead center of cylinder 1 compression for sequential fuel injection control, ignition timing control, and knock control. The camshaft position sensor is a sensing device, also known as a synchronization signal sensor. It serves as a cylinder identification and positioning device, inputting the camshaft position signal to the ECU, and is the main control signal for ignition control.
8
1
Share

Is the Buick Excelle's Fuel Consumption High?

The comprehensive fuel consumption of the Buick Excelle is 5.3-5.9L/100km. Currently, there are four models of the 2021 Buick Excelle available for sale: the 1.3T automatic mild hybrid entry model and the 1.3T automatic mild hybrid elite model, both with a comprehensive fuel consumption of 5.3L/100km. The classic 1.5L automatic entry model and the classic 1.5L automatic elite model have a comprehensive fuel consumption of 5.9L/100km. The above figures are the NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.9-7.5L/100km. When driving, the following five tips can help reduce fuel consumption: During the starting process, the vehicle should start in a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can multiply fuel consumption. Light acceleration and braking, early braking: When driving, gently press the accelerator to avoid sudden increases in engine speed and prevent the car from shaking during driving, thereby making the car more fuel-efficient. By estimating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular vehicle maintenance or inspection: Timely oil changes can reduce carbon deposits (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases); regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per mileage. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
6
5
Share

What is the actual fuel consumption of the Buick Enclave?

The Buick Enclave has a fuel consumption of 11.1 liters per 100 kilometers. The Enclave is a mid-to-large-size SUV under the Buick brand, with a wheelbase of 2863 mm, and its length, width, and height are 4981 mm, 1953 mm, and 1727 mm, respectively. The Enclave is a five-door, seven-seat SUV, and all models are equipped with a 2.0-liter turbocharged engine. The reasons for the increasing fuel consumption of a car are as follows: 1. Temperature fluctuations affecting fuel consumption: Generally, in winter, when temperatures are low, fuel consumption tends to increase, almost comparable to fuel consumption when using air conditioning in summer. This is because lower temperatures cause the engine to dissipate more heat. 2. Lack of regular vehicle maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing resistance in the engine's moving parts and requiring more energy to overcome this resistance, thus raising fuel consumption. 3. Spark plugs needing replacement: Spark plugs are often overlooked. Even if they can still function, worn spark plugs may cause delayed ignition due to insufficient ignition energy, missing the optimal ignition timing.
17
0
Share

Can You Continue Driving with an ESC Malfunction?

You should not continue driving with an ESC malfunction. When the ESC warning light illuminates on your vehicle, it indicates a malfunction in the Electronic Stability Control system, meaning the system is not operational. This alert is usually caused by software system issues, though false alarms can also occur. It is recommended to visit a nearby 4S dealership for inspection and repair, as continued driving may pose safety risks. The primary function of ESC is to control the longitudinal and lateral stability of the vehicle, ensuring it moves according to the driver's intentions. The foundation of the Electronic Stability Control system lies in the ABS (Anti-lock Braking System) functionality. This system can apply braking hundreds of times per second when the tires are about to lock up during braking, similar to mechanical cadence braking. Even during full-force braking, the tires maintain rolling motion, as rolling friction is more effective than the sliding friction that occurs when wheels lock up. Additionally, this system helps maintain directional control of the vehicle.
14
4
Share

Where is the spare tire located in the BMW 3 Series?

The BMW 3 Series does not come with a spare tire. A spare tire refers to an additional tire for a sedan, which has the same specifications as the original car tires. Precautions for using a spare tire include: 1. Regularly inspect the spare tire; 2. Do not use it for an extended period; 3. Avoid rotating the spare tire with other tires; 4. Keep it away from oil products. The BMW 3 Series is a mid-size car under the BMW brand. Taking the 2021 BMW 3 Series Modified 320i Sport Package Edition as an example, its powertrain is equipped with a 2.0L inline four-cylinder turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 250Nm, paired with an 8-speed automatic transmission, and features rear-wheel drive. In terms of body dimensions, the 2021 BMW 3 Series Modified 320i Sport Package Edition measures 4719mm in length, 1827mm in width, and 1459mm in height, with a wheelbase of 2851mm.
4
0
Share

How to Adjust a Misaligned Rearview Camera?

The adjustment method for a misaligned rearview camera: 1. Start the vehicle and shift into reverse gear; 2. Turn on the vehicle screen and activate the rearview camera; 3. Check if the field of view is comprehensive and the height is appropriate; 4. If not suitable, get out of the car or ask someone for help, locate the rearview camera, which is usually installed near the license plate light on the trunk lid or under the rear bumper, and adjust the camera's angle up or down to the appropriate position. Adjustment method for rearview camera misalignment caused by the steering system: 1. Straighten the vehicle and remove the steering wheel, adjusting the angle of the spline gear based on the deviation position; 2. Drive the car to a repair shop to adjust the steering gear's tie rod, which essentially means performing a wheel alignment. Normally, the steering wheel can only turn one and a half turns to the left or right when straightened. If there is a deviation, it indicates a problem with the steering system, which needs to be adjusted using this method.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.