Can I Choose the Date for Subject One Test Reservation Myself?

1 Answers
MacKaylee
07/30/25 8:36am
Yes, the time for Subject One test reservation can be freely chosen. There is no time limit for Subject One, and it can be scheduled at any time. Subject One, also known as the Subject One theory test or driver's theory test, is part of the motor vehicle driver's license examination. It is conducted at the vehicle management office and is a mandatory licensing test that all driver's license applicants must pass. The following are the test contents for the Subject One exam: 1. Road traffic safety laws, regulations, and rules: Procedures for handling road traffic safety violations; Procedures for handling road traffic accidents; Regulations on the application and use of motor vehicle driver's licenses; 2. Local regulations: Key content selected based on local regulations; Mastery of the key content of local regulations; 3. Traffic signals: Road traffic signal lights; Road traffic signs; Road traffic markings; Traffic police hand signals; 4. Basic knowledge of safe driving and civilized driving: Driving behavior; Traffic safety violations; 5. Basic knowledge related to motor vehicle driving operations: Instruments and indicator lights; Control devices; Safety devices.
Was this review help?
10
0
Share
More Forum Discussions

What Causes the Low-Speed Jerking in Cadillac?

It may be due to engine oil passage blockage or transmission damage. The following are relevant extended information: Engine oil passage blockage: The combustion of fuel, which is also the power source of the engine, is determined by the engine's ignition, air intake, and fuel injector. If the air intake decreases, ignition weakens, or the fuel injection reduces, the power will be insufficient, resulting in a jerking sensation. Transmission damage: Persistent dirt and impurities inside the transmission can cause jerking. During the new car break-in period: The power output of a new car and the meshing of components are not at their best level. Additionally, the transmission computer has a self-learning mechanism that requires continuous adjustment of oil pressure for gear shifting, thus causing a jerking sensation.
16
5
Share

What Causes Clutch Shudder and Stalling?

The main causes of clutch shudder and stalling are as follows: 1. Malfunction in the vehicle's braking system, such as a stuck handbrake, unreturned brake calipers, or excessively worn brake pads. 2. Issues with the vehicle's fuel supply system, including clogged fuel lines, damaged fuel pump, or blocked fuel filter. 3. Engine problems, such as intermittent operation of fuel injectors. Solutions for clutch shudder: 1. Readjust the distribution of the clutch pressure point. 2. Replace the clutch pressure spring with one of the appropriate size. 3. Apply lubricant between components like the release sleeve and the release fork shaft. 4. Replace damaged friction linings on the driven plate.
8
4
Share

What are the reasons why a Golf has power but cannot start?

Introduction to the reasons why a Golf has power but cannot start: 1. Battery depletion: 1. Symptoms: The starter begins to turn but lacks sufficient speed, eventually making only a clicking sound without turning. Low temperatures in winter or forgetting to turn off certain electrical devices can prevent the vehicle from starting, especially during long-term short-distance, low-speed use in winter, causing the battery voltage to drop below the rated value, making normal operation impossible. 2. Emergency solution: If this occurs, call the service station for assistance, jump-start the vehicle, or temporarily start it, then ensure the battery is recharged at the service station. 2. Fuel flow obstruction: 1. Symptoms: No fuel pressure in the engine's fuel supply line. This often happens on extremely cold mornings due to long-term contamination of the fuel lines. At very low temperatures, water and debris can mix, blocking the fuel lines and preventing the engine from starting. 2. Emergency solution: Move the car to a warmer environment, and it should start after a while, or thoroughly clean the fuel system to resolve the issue. 3. Poor ignition system performance: 1. Symptoms: On extremely cold days, low intake temperatures can cause poor fuel atomization in the cylinders. Combined with insufficient ignition energy, this can lead to cylinder flooding, where excessive fuel accumulates in the cylinders, exceeding the ignition limit concentration and preventing the engine from starting. 2. Emergency solution: Remove the spark plugs, clean the oil between the electrodes, and reinstall them to start the engine. A thorough solution involves checking the ignition system to address low ignition energy, such as inspecting spark plug electrode gaps, ignition coil energy, and the condition of high-voltage lines.
3
1
Share

How to Start the Car with a Dead Key Fob

Methods to start a car with a dead key fob for push-button start: 1. Use the mechanical key. 2. Press the side of the key with the logo firmly against the push-button start switch, hold for a few seconds, then press down to start the car. 3. The key contains a battery; when the battery is dead, you can purchase a replacement button battery nearby. Methods to open the car door with a dead key fob: Every remote key comes with a metal key blade. There is usually a switch on the remote key; flip it to pull out the key blade. Insert this key blade directly into the door's keyhole to unlock or lock the door.
17
2
Share

Can You Disinfect a Car with Alcohol?

You can disinfect a car with alcohol, but the following points should be noted: 1. It is best to use a towel dipped in alcohol to wipe the interior of the car instead of directly spraying alcohol inside, to avoid excessively high alcohol concentration in the air, which poses a fire risk. 2. When wiping the interior of the car, remember to turn off the engine first and wait until the engine and interior equipment have stopped working before wiping. 3. After disinfecting the car, do not smoke inside or close the car windows, as rising temperatures can reach the ignition point of alcohol, making explosions or fires highly possible.
12
0
Share

How to Reset the Maintenance Light on Jetour X90?

Method to reset the maintenance light on Jetour X90: 1. Turn off the ignition switch while holding down the mode switch; 2. Turn on the ignition switch and then release the mode switch; 3. Within 30 seconds, simultaneously press the mode switch and the clock switch for less than 2 seconds. Car maintenance, also known as vehicle servicing, refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle. The Jetour X90 is a six-seat SUV model launched by Chery Holding's Jetour brand. In terms of body dimensions, the Jetour X90 measures 4840mm in length, 1925mm in width, and 1745mm in height, with a wheelbase of 2850mm.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.