Can I choose the appointment time for Subject 1 myself?

2 Answers
MacBriella
08/29/25 3:49am
If you register for the driving test yourself, you can schedule the appointment on your own. Here is the relevant information: 1. Subject 1: Subject 1, also known as the theoretical test for drivers, is part of the motor vehicle driver's license examination. 2. Test Content: The content of Subject 1 includes traffic regulations and related knowledge, covering the theoretical basis of driving, road safety laws and regulations, local regulations, and other relevant knowledge. 3. Driver's Test: The motor vehicle driver's test is a qualification examination organized by the vehicle management office. Only by passing the driver's test can you obtain a driver's license and legally drive a motor vehicle.
Was this review help?
1
3
Share
PiperRose
09/10/25 8:28am
When I took the subject one test, I could indeed choose the appointment time myself, which felt quite convenient. I used the 12123 APP, logged in, and checked various dates and available slots on my phone, such as 8 AM or 2 PM options. I chose a weekend morning session because I had to work on weekdays. However, it's important to note that popular time slots get booked quickly, so it's better to schedule early. After selecting the time, I had to confirm and pay, and the system sent a text reminder—the whole process was straightforward without needing to queue on-site. But it's advisable to check the distance to the test location in advance to avoid long-distance delays. Also, the APP might sometimes lag, so it's better to register an account and upload photos beforehand to save time.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

Is it mandatory to display the compulsory traffic insurance decal?

It is mandatory to display the compulsory traffic insurance decal, otherwise corresponding penalties will be imposed. According to relevant traffic regulations, if a motor vehicle driven on the road does not display the inspection compliance label or insurance label, a warning or a fine ranging from 20 to 200 yuan will be issued, and 1 demerit point will be recorded. Specific details are as follows: Regulations on the display of compulsory traffic insurance decals: Article 95 of the Road Traffic Safety Law stipulates: If a motor vehicle driven on the road does not display the inspection compliance label or insurance label, or if the driver fails to carry the vehicle license or driving license, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license, label, or complete the required procedures, and may impose penalties in accordance with Article 90 of this Law (a warning or a fine ranging from 20 to 200 yuan). Article 13 of the Implementation Regulations of the Road Traffic Safety Law states: The motor vehicle inspection compliance label and insurance label shall be affixed to the upper right corner of the front windshield of the motor vehicle. Violation of these regulations will result in a fine of 200 yuan.
15
0
Share

How is tire size represented?

Tire size is printed on the sidewall and can be represented in two ways: High-pressure tires: High-pressure tires are generally represented as "tire diameter × tire section width," such as 34×7. Low-pressure tires: Low-pressure tires are generally represented as "section width ~ rim diameter," such as 7.5~20, with the unit in inches (1in = 0.0254m). Additional information: Tire markings: Tires also have various markings, for example, D is used for light vehicles, F for medium-sized vehicles, G for standard vehicles, and H, L, J for large luxury and high-performance vehicles. Radial tires: If the letter R is added on the sidewall, such as 175R13, it indicates a radial tire, where the tire section width is 6.9in (175mm), the rim diameter is 13in (330mm), and the word RADIAL is usually also engraved.
2
5
Share

What does the bulb symbol on the car dashboard mean?

The bulb symbol on the car dashboard is the bulb failure indicator light. If the license plate light, width indicator light, reverse light, etc. are damaged, this warning light will illuminate. Below is an introduction to the car dashboard: Introduction: The car dashboard is a device that reflects the working conditions of various vehicle systems. Different cars have different dashboards. However, conventional dashboards in most cars include a speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, etc. Beneath the surface of modern car dashboards, various indicator or warning lights are installed, such as the coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, anti-lock braking system (ABS) indicator, traction control indicator, airbag (SRS) warning light, etc. Tachometer: It is generally located within the instrument panel, placed symmetrically with the speedometer. The tachometer operates based on magnetic principles, receiving pulse signals generated when the primary current in the ignition coil is interrupted. It converts these signals into a displayable RPM value. The faster the engine speed, the more pulses the ignition coil generates, and the higher the RPM value displayed on the gauge. Most modern cars use electronic tachometers, which come in analog (pointer) and digital (LCD) display types.
11
0
Share

How much engine oil does a BMW 5 Series require?

BMW 5 Series requires approximately 4L of engine oil. Here is the relevant introduction about BMW 5 Series: Vehicle Positioning: The BMW 5 Series is a mid-size luxury C-class sedan under BMW, available in both standard wheelbase and long wheelbase versions. The long wheelbase version is domestically produced, while the standard wheelbase version is imported. Powertrain: The domestically produced BMW 5 Series uses two types of engines: a low-power 2.0-liter turbocharged engine and a high-power 2.0-liter turbocharged engine. Both engines are paired with an 8-speed automatic transmission. Suspension Type: The BMW 5 Series features a double-wishbone independent front suspension and a multi-link independent rear suspension.
2
2
Share

Is New Energy Vehicles a False Proposition?

Nowadays, new energy electric vehicles themselves are a false proposition because the so-called electricity for electric vehicles is not self-generated. Energy Loss: It still relies on traditional energy sources for power generation to charge, and no matter what, the electricity generated from traditional energy sources inherently involves the loss of traditional energy. Moreover, there is an efficiency issue when converting the input electrical energy into kinetic energy in electric vehicles, leading to further energy loss. Severe Pollution: While electric vehicles appear clean at the end-use stage, the same traditional energy sources are still consumed at the front end. It can even be argued that the batteries equipped in electric vehicles may cause even greater pollution in the future.
7
0
Share

Can Damaged Rims Be Repaired?

Damaged rims can be repaired. Here is relevant information about automotive rim repair: Surface Damage: Primarily involves wear and scratches on the rim surface. Repairs only address the surface and generally do not affect the main load-bearing structure of the original rim, having minimal impact on the rim's reliability and safety. Rim Deformation: Refers to the rim becoming bent, twisted, or out-of-round due to external forces. When a car rim suffers a collision or impact, it can easily lead to bending or deformation of the rim edge, which constitutes severe damage. Rims are typically made of aluminum alloy, a material with relatively poor resistance to metal fatigue. After deformation caused by external forces and subsequent forceful restoration to its original shape, even if no fine cracks are visible to the naked eye, scientifically speaking, the metal structure in that area is already fundamentally different from that of a normal rim. Fracture Damage: Occurs when a rim suffers severe impact, resulting in varying degrees of fractures or gaps. Although fractured rims can be repaired through welding, their safety performance is significantly compromised. Normal rim manufacturing processes involve casting, where metal in a molten state is gradually cooled or crystallized under pressure. Welding, however, is a process of localized heating, melting, and re-solidification. The area around the weld inevitably experiences weld stress, and after prolonged load-bearing operation, fatigue cracks are highly likely to develop in the rim's high-stress zones, potentially leading to fractures with serious consequences.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.