Can I Check Order Status on Mercedes-Benz Official Website?

What does roz/ron90-98 mean?

It represents the gasoline grade, indicating the octane rating range between 90 and 98 can be used. Relevant introductions are as follows: 1. Composition: Gasoline is composed of isooctane and heptane, and the proportion of isooctane is the actual octane rating of the gasoline. For example, the so-called 97-grade gasoline means isooctane accounts for 97% of the fuel composition, and heptane accounts for 3%. 2. RON: The value of RON/ROZ can directly reflect the compression ratio that the gasoline can withstand. When the gasoline quality is good, without impurities and other chemical substances that should not be contained, the RON value of gasoline is the most scientific, accurate, and commonly used standard to reflect the actual performance of gasoline.

7

1

Share

What is the actual fuel consumption of the Buick Envision 1.5t?

The actual fuel consumption of the Buick Envision 1.5t is approximately 8.9 to 11 liters per 100 kilometers. Taking the 2020 Buick Envision 1.5t as an example, its body structure is a 5-door, 5-seat SUV with dimensions of 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters. The 2020 Buick Envision 1.5t features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with an inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kw, and a maximum torque of 250nm.

7

0

Share

What are the body dimensions of the Picasso?

The length, width, and height of the Picasso are 4287 mm, 1751 mm, and 1642 mm respectively, with a wheelbase of 2760 mm. Relevant information is as follows: The Picasso is equipped with two engines, one is a 1.6L naturally aspirated engine, and the other is a 2.0L naturally aspirated engine: 1. 2.0L naturally aspirated engine: The 2.0L naturally aspirated engine delivers 135 horsepower and a maximum torque of 190 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4100 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. 1.6L naturally aspirated engine: The 1.6L naturally aspirated engine produces 106 horsepower and a maximum torque of 142 Nm. This engine achieves its maximum power at 5750 rpm and its maximum torque at 4000 rpm. It also employs multi-point fuel injection technology and utilizes an aluminum alloy cylinder head with a cast iron cylinder block.

15

3

Share

What causes the Odyssey to have difficulty accelerating?

The reasons for the Odyssey's acceleration difficulty may include ignition system malfunctions, insufficient fuel injection, excessive engine carbon buildup, fuel system failures, engine system faults, or damage to the catalytic converter/turbocharger. Below are more detailed explanations: Specific causes: 1. Ignition system failure: Components like aging ignition coils or overdue spark plug replacement can cause insufficient ignition energy, poor combustion, weak engine acceleration, and illuminated engine warning lights. 2. Fuel system failure leading to low pressure: Insufficient fuel injection results in poor engine acceleration. 3. Excessive engine carbon buildup: This affects fuel atomization, leading to poor combustion, excessive emissions, and weak acceleration. 4. Engine system faults triggering emergency operation mode: This restricts engine power output, causing acceleration difficulties. Sensor failures (oxygen sensor, air flow meter, crankshaft position sensor, knock sensor, etc.) may trigger this mode. 5. Catalytic converter or turbocharger damage: In such cases, visit a repair facility for computer diagnostics to identify trouble codes and resolve the issue accordingly.

10

1

Share

Does engine oil become thinner or thicker with use?

With prolonged use, engine oil tends to become thicker. Here are the reasons for oil thickening: Changes in viscosity modifiers: Most engine oils contain viscosity index improvers. During extended operation, these viscosity modifiers can be sheared, losing their original viscosity and causing the oil's viscosity to decrease to some extent. Oxidation: Engine oil undergoes oxidation within the engine, leading to thickening. Other contaminants: The engine generates significant sludge and impurities during operation, which are dispersed in the oil by detergents and dispersants, resulting in increased viscosity.

7

2

Share

What cleaning agent is used for engine oil stains?

Engine oil stains can be cleaned with organic solvent cleaning agents. Engine oil is the lubricating oil used in engines. It consists of base oil and additives. The density of engine oil is approximately 0.91×10 cubic (kg/m3), and it serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is hailed as the "blood" of automobiles. Below is relevant information about using organic solvent cleaning agents to clean engine oil stains: Composition: Engine oil is a mixture of several hydrocarbons and is an organic substance. Principle: It can dissolve engine oil based on the principle of like dissolves like.

8

0

Share

Can I Check Order Status on Mercedes-Benz Official Website?

What does roz/ron90-98 mean?

What is the actual fuel consumption of the Buick Envision 1.5t?

What are the body dimensions of the Picasso?

What causes the Odyssey to have difficulty accelerating?

Does engine oil become thinner or thicker with use?

What cleaning agent is used for engine oil stains?

Why are there fewer buyers for the Audi S3?

What kind of engine oil should be used for Volkswagen Bora 1.4T?

What is the actual fuel consumption of the 2018 Changan CS75?

What is the actual measured fuel consumption of the Great Wall VV7?