Can I check my own vehicle's compulsory traffic insurance?

How to Match the Tire Pressure Monitoring System for the Great Wall H6?

The method to match the tire pressure monitoring system for the Great Wall H6 is as follows: 1. Connect the diagnostic tool to the CANbus diagnostic port; 2. Select the tire position of the sensor; 3. Place the setter near the tire valve of the sensor; 4. Press the button for the sensor's tire position, and the indicator light will flash; 5. When the indicator light stops flashing and the sensor's information is received, the matching is successful. Taking the 2021 manual urban edition Great Wall H6 as an example, its body dimensions are: length 4615mm, width 1860mm, height 1720mm, wheelbase 2680mm, fuel tank capacity 58L, and trunk capacity 347L.

10

0

Share

How to Activate the Auto Start-Stop Function in the Levin?

Typically, the auto start-stop function is enabled by default after the car is started. You can find the auto start-stop switch in the button area in front of the gear lever. To turn it off, simply press the button. Below is some relevant information about the Levin: 1. The Levin is a compact sedan with dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. 2. In terms of power, the Levin is equipped with a turbocharged engine that delivers a maximum horsepower of 116hp, a maximum torque of 185Nm, and a maximum power output of 85kW. The car comes standard with LED headlights, one-touch power windows for all four doors, and rear air vents.

8

4

Share

What is the BrakeHold Button

BrakeHold is the automatic parking function, which is equipped in many vehicles. Some cars may also refer to it as AutoHold. Here are some additional details: 1. BrakeHold is suitable for use when waiting at traffic lights. After activating this function, you don't need to press the brake pedal or pull the handbrake while waiting for the light to change. When the light turns green, pressing the accelerator pedal will make the car move forward. 2. The automatic parking system is a technical application that enables an automatic handbrake during vehicle operation. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary sliding when the automatic electronic parking brake is engaged. 3. The purpose of the automatic parking function is to prevent the vehicle from rolling backward, making it particularly useful on slopes and during frequent starts and stops.

14

0

Share

What is the fuel consumption of the Volkswagen Passat 1.8t?

The official combined fuel consumption of the Passat 1.8t as per the Ministry of Industry and Information Technology is: 6.8L/100km. The average actual fuel consumption reported by owners is around 8.5L/100km. Overall, the fuel consumption is quite good, but it should be noted that fuel consumption is influenced by various factors, so the actual usage should be taken as the standard. The main factors affecting fuel consumption include the following reasons: 1. Spark plug carbon deposits: If spark plugs accumulate more carbon deposits or become old, it will lead to a decrease in ignition energy and stability, resulting in increased fuel consumption. It is recommended that urban car users clean them every 20,000-30,000 kilometers and replace them periodically based on the spark plug material. 2. Intake system cleanliness: Its cleanliness directly affects the engine's working condition and thus fuel consumption. Special attention should be paid to the air filter and throttle valve. In general, it is recommended to replace the air filter every 10,000 kilometers in northern regions and every 15,000 kilometers in southern regions. If possible, the air filter can be cleaned with compressed air in the opposite direction every 5,000 kilometers. Experts recommend cleaning the throttle valve every 20,000-30,000 kilometers. The air flow meter also affects fuel consumption, as its accuracy is related to the engine's air-fuel ratio. If there is a problem, it will inevitably lead to increased fuel consumption. If the flow meter is found to be damaged, it must be replaced. 3. Fuel injector cleaning: Whether the fuel injector sprays fuel with good atomization directly affects the engine's combustion, leading to increased fuel consumption. Therefore, experts recommend cleaning the fuel injectors every 60,000 kilometers or so. 4. Tire pressure monitoring: Low tire pressure increases the contact area between the tire and the ground, which not only leads to increased fuel consumption but also causes damage to the tire sidewall. There is also a risk of tire blowout during high-speed driving. Therefore, it is important to maintain reasonable tire pressure regularly.

9

2

Share

Where is the cabin air filter located in the Haima S7?

Haima S5's cabin air filter is positioned to the right of the accelerator pedal. Knowledge expansion about cabin air filter functions: 1. Filters dust particles from the air, preventing these pollutants from entering the car's evaporator and causing sludge buildup that could block the evaporator. 2. Filters airborne dust, mist, pollen, carbon oxides, and sulfides. Since the filter contains activated carbon, it can absorb harmful gases and particulate matter from the air. Replacement method: 1. Remove the triangular cover near the accelerator. 2. Pry open the black cover with a screwdriver. 3. Pull out the old filter. 4. Install a new cabin air filter.

3

4

Share

How to Reset the Maintenance Light on the Jade?

Jade maintenance reminder light can be reset by visiting a 4S shop for maintenance and refreshing the parameters of the onboard computer. There are two methods to solve this issue. The first method is to go to an authorized service center for maintenance, where the maintenance personnel will use a professional computer diagnostic tool to reset the maintenance light. The second method is to manually reset the maintenance light, which is typically used during self-maintenance. Instructions and steps for resetting the maintenance light on the Jade: 1. Instructions: The "SERVICE" indicator on the dashboard display is the maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" indicator flashes, and it disappears after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset. 2. Steps: (1) With the engine off, press and hold the short-distance counter reset button below the tachometer. (2) Turn the ignition switch to the ON position, release the short-distance counter reset button, and the "SERVICE" indicator will appear on the display. (3) Pull out the minute button on the clock and turn it to the right; the mileage will appear on the display. (4) Turn off the engine to reset the reminder message. (5) Turn the ignition switch to the ON position, and the "SERVICE" indicator will disappear.

11

3

Share

Can I check my own vehicle's compulsory traffic insurance?

How to Match the Tire Pressure Monitoring System for the Great Wall H6?

How to Activate the Auto Start-Stop Function in the Levin?

What is the BrakeHold Button

What is the fuel consumption of the Volkswagen Passat 1.8t?

Where is the cabin air filter located in the Haima S7?

How to Reset the Maintenance Light on the Jade?

What is the optimal mileage for the first maintenance of the Bin Yue?

What is the difference between semi-synthetic oil and mineral oil?

Why is the car steering wheel a bit stiff?

How to Check Who the Owner of a License Plate Number Is?