Can I Change My Car's Engine Oil Myself?

1 Answers
StPaisley
07/28/25 5:03pm
If the car owner masters the method of changing the engine oil, they can perform the replacement themselves. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its fundamental properties, while additives are an important part of the lubricating oil. The primary functions of engine oil are lubrication, cleaning, heat dissipation, ensuring the normal operation of the engine, and extending its lifespan. Therefore, engine oil plays a crucial role in the proper functioning and longevity of the engine. The SAE viscosity classification for winter oils includes grades such as 0W, 5W, 10W, 15W, etc. The symbol 'W' stands for winter, and the smaller the number before 'W', the lower the low-temperature viscosity and the lower the applicable minimum temperature. The SAE viscosity classification for summer oils includes grades such as 20, 30, 40, 50, where a larger number indicates higher viscosity and a higher applicable maximum temperature.
Was this review help?
15
0
Share
More Forum Discussions

What are the specific subjects tested in the driving license exam?

There are mainly 4 subjects in the driving license exam. The details are as follows: 1. Subject 1: Road traffic, traffic signals, traffic safety violations and accident handling, application and use of motor vehicle driving licenses, motor vehicle registration regulations, as well as road traffic safety laws, regulations and rules. 2. Subject 2: Reverse parking into a garage, stopping and starting on a slope, parallel parking, curve driving, and right-angle turns. 3. Subject 3: Road driving skills. Preparation before driving, starting, changing lanes, left turns at intersections, right turns at intersections, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and driving at night. 4. Subject 4: Safe and civilized driving knowledge (theory).
15
3
Share

Where is the fuel filler switch of Roewe 550?

Roewe 550's fuel filler switch is connected to the central door locking system. When the door lock is open, press the right side of the cover to open it, then slowly rotate the fuel filler cap counterclockwise to open it. After refueling, reinstall the fuel filler cap and tighten it until you hear three "clicks". Generally, there are three ways to open the fuel filler cap of a family car: using a key, an interior switch, or direct pressing. The mechanical key method is more complicated, so few family cars use it nowadays. Roewe 550 adopts the direct pressing method. For cars with this type of fuel filler cap, the owner must ensure the car is locked when parked; otherwise, the fuel filler cap can be opened if the central locking is not engaged, which poses certain risks. Ways to open the fuel tank: If the automatic unlocking function of the fuel filler flap fails mechanically, the flap can be manually opened using the emergency switch inside the trunk. Remove the right interior panel in the trunk to access the fuel filler flap release cable. The mechanical key method is more complicated, so it is rarely used in family cars today, but it is more common in rugged SUVs like the Wrangler and Haval H5. The interior switch method is now more common, featuring a button inside the car, which is more convenient than the mechanical key method. However, this can lead to refueling without turning off the engine, so owners need to be extra careful. The direct pressing method is the most convenient of the three fuel filler cap opening methods, requiring no action from the owner, allowing the fuel attendant to refuel directly. For cars with this method, the owner must ensure the car is locked when parked; otherwise, the fuel filler cap can be opened if the central locking is not engaged, posing certain risks.
16
0
Share

What are the tips for passing Subject Three in one go?

Subject Three passing tips are as follows: 1. Reversing into the garage: When aligning and turning the steering wheel, it's better to turn early rather than late. Turning early allows for correction, while turning late may result in directly crossing the line. After entering the garage, adjust the car body, following the principle of turning towards the wider side. Adjustments should be quick with small angles, while also checking the rearview mirror to see if the stopping point is reached. 2. Parallel parking: Keep a moderate distance from the curb to avoid the left wheel crossing the line when entering the garage. Turn the steering wheel quickly to avoid missing alignment points. When exiting the garage and returning the steering wheel, the speed may suddenly increase, so keep the clutch steady. 3. Hill start and stop: While going uphill, observe the distance between the car body and the side line through the rearview mirror. If the distance is too large, adjust right; if close to the line, adjust left—quick turns with small angles. Slightly release the clutch to prevent stalling due to insufficient power, and always check if the designated stopping point is reached. When starting, lift the clutch slowly to avoid stalling; lift to the semi-engaged point before releasing the brake to prevent rolling back.
16
2
Share

What brand is Lynk & Co?

Lynk & Co is an independent automotive brand. More details about Lynk & Co are as follows: 1. Configuration: In terms of technology and configuration, the Lynk & Co 01 features seamless connected car mobile internet technology, world-leading safety technology, a rich and forward-looking electrified powertrain system, and an excellent driving experience as its four major advantages. Centered around the central touchscreen, the vehicle is equipped with a series of interconnected technologies that link the vehicle, personal devices, and the cloud, constantly meeting people's connectivity needs. 2. System: The Lynk & Co 01 concept car boasts an advanced body structure that meets and exceeds safety crash standards in Europe and America. It is equipped with various globally leading active safety systems, including driver assistance systems, lane assistance systems, and emergency braking systems.
9
2
Share

Where can you make a U-turn when shoulders align during Subject 3 test?

When needing to turn or make a U-turn, generally there are crosswalk lines at intersections. You can make a U-turn when your shoulders align with the crosswalk lines. Below is relevant information: 1. Subject 3 vehicle starting techniques: Ensure safety, walk around the vehicle for a safety check, then enter the vehicle following standard procedures. Confirm all doors are completely closed. Adjust the seat, headrest, and mirrors according to your height. Fasten your seatbelt and remind passengers to do the same. Check the control devices, start the engine, observe the dashboard, and stop the engine immediately if any abnormalities are found for troubleshooting. Only proceed when the dashboard shows no abnormalities. 2. Precautions: If you notice vehicle exterior damage, unsafe surrounding environment, or abnormal conditions under the vehicle, eliminate potential safety hazards before entering the vehicle.
16
4
Share

Which manufacturer produces Xuantu brake pads?

Xuantu brake pads are manufactured by Xuantu Wiper Brake Pad Factory. Here are some relevant details: 1. Brake Pads: Automotive brake pads, also known as automotive brake linings, refer to the friction materials fixed on the rotating brake drums or brake discs of the wheels. The friction linings and friction blocks bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. 2. Brake Pad Composition: Automotive brake pads are generally composed of steel plates, adhesive heat insulation layers, and friction blocks. The steel plates are coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.