Can I Cancel the Subject 2 Test Reservation on Saturdays and Sundays?

1 Answers
TannerAnn
07/30/25 3:39am
You cannot cancel the Subject 2 test reservation on Saturdays and Sundays. The driving test center is closed on weekends and statutory holidays. As a government department, it operates on fixed working hours, which are from 8:30 AM to 12:00 PM and from 2:00 PM to 5:30 PM, Monday to Friday. If the scheduled test plan has not yet closed, you can cancel the reservation through the [Traffic Management 12123] platform. However, if the test plan has closed or the test has been successfully scheduled, you must go to the vehicle management office to cancel the reservation, and you must do so at least one day before the test. Some larger and more formal driving schools can also handle the cancellation of test reservations, but generally, you can only cancel the reservation at the vehicle management office on normal working days. Usually, you can cancel the reservation online before receiving the confirmation SMS for the successful reservation. If an applicant cannot attend the test at the scheduled time for any reason, they must apply to cancel the reservation one day in advance. If the applicant fails to attend the test at the scheduled time without cancellation, the test will be marked as a failure.
Was this review help?
18
2
Share
More Forum Discussions

What is the temp setting for cold air in a car?

In a car, temp 18°C is considered cold air. Below is relevant information about car temp: 1. Definition: Temp in a car refers to temperature, which can be adjusted via buttons. The temp button is generally located on the car's central console, and some models also have it at the rear air vents, allowing independent control of the rear air conditioning temperature. 2. Adjustment Method: There is a temperature adjustment knob on the car's dashboard, with one side red and the other blue. Turning it all the way to the red side produces hot air, while turning it all the way to the blue side produces normal temperature air. To get cold air, you also need to press the compressor AC switch to activate the cooling system and produce cold air.
16
3
Share

Where is the license plate number Ji F from?

Ji F is the license plate number of Baishan City, Jilin Province. The following are the license plate numbers of other regions in Jilin Province: 1. Ji A Changchun City. 2. Ji B Jilin City. 3. Ji C Siping City. 4. Ji D Liaoyuan City. 5. Ji E Tonghua City. 6. Ji G Baicheng City. 7. Ji H Yanbian Korean Autonomous Prefecture. 8. Ji J Songyuan City. Additional information: 1. The first character of a license plate number is a Chinese character, representing the abbreviation of the province where the vehicle is registered. 2. The second character of a license plate number is an English letter, representing the code of the prefecture-level city where the vehicle is located. The general rule is: A is the provincial capital, B is the second largest city in the province, C is the third largest city in the province, and so on.
16
0
Share

How much does tire pressure increase when driving on the highway?

Tire pressure increases by 0.4 to 0.6 bar when driving on the highway. The normal tire pressure temperature is between 2.2 and 2.4 bar, and tire pressure rises as the temperature increases. During high-speed driving, especially during emergency braking and rapid acceleration, tire temperature rises quickly. For every 10-degree increase in tire pressure temperature, the pressure increases by 0.1 bar. Therefore, maintaining tire pressure at the standard value helps avoid blowouts during high-speed driving and emergency braking. During long-distance driving, the tires generate heat from prolonged friction, and tire pressure increases in high-temperature environments. It is not advisable to lower tire pressure excessively to prevent blowouts, as excessively low tire pressure can also lead to blowouts. Low tire pressure increases the contact area between the tire and the ground, putting more pressure on the tire shoulders, which generates heat through internal friction, consumes the gas inside the tire, and damages its internal structure.
6
0
Share

Can You Start in Third Gear?

You cannot start in third gear. Here are some related introductions about starting a car: Precautions for starting: Get in the car, fasten the seat belt, and adjust the seat. Quickly press the clutch to the bottom and shift into first gear. Turn on the left turn signal, check the surroundings (both side mirrors), and release the handbrake. Quickly lift the clutch to the semi-engaged position, pause slightly, then slowly lift the clutch while gently pressing the accelerator to start the car smoothly. Driving precautions: Do not keep the clutch in a semi-engaged state for a long time. Some drivers are accustomed to keeping their left foot on the clutch while driving, thinking it provides better control over the vehicle. However, this practice causes significant damage to the clutch plate. Especially when driving at high speeds, prolonged semi-engaged state will wear out the clutch plate rapidly.
3
5
Share

How to Fix a Red-Hot Exhaust Pipe?

To address a red-hot exhaust pipe, it's necessary to identify the underlying cause and apply the appropriate solution. Below are specific explanations regarding a red-hot exhaust pipe: 1. Lean Air-Fuel Mixture: An excessively lean mixture results in slow combustion during the power stroke, causing combustion to continue into the exhaust stroke. The burning gases entering the exhaust pipe can cause it to turn red-hot. 2. Delayed Ignition Timing: Late ignition leads to the combustible mixture still burning when the exhaust valve is open. The burning gases rushing into the exhaust pipe through the exhaust valve continue to combust inside the pipe, heating it until it glows red. 3. Exhaust Valve Not Sealing Properly: If the exhaust valve doesn't close tightly, burning gases from the power stroke can leak through the improperly sealed valve into the exhaust pipe, heating it to a red-hot state. In severe cases, this can damage the valve.
6
1
Share

What are the abbreviations for vehicle license plates in Hubei Province?

Hubei Province vehicle license plate abbreviations are: 1. E-A Wuhan City, E-B Huangshi City, E-C Shiyan City; 2. E-D Jingzhou City, E-E Yichang City, E-F Xiangyang City; 3. E-G Ezhou City, E-H Jingmen City, E-K Xiaogan City; 4. E-J Huanggang City, E-L Xianning City, E-M Xiantao City; 5. E-N Qianjiang City, E-P Shennongjia Forestry District, E-Q Enshi Tujia and Miao Autonomous Prefecture; 6. E-R Tianmen City, E-S Suizhou City. Additional information: 1. The first character of a license plate is a Chinese character representing the province where the vehicle is registered. 2. The second character is an English letter representing the prefecture-level city code where the vehicle is registered.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.