Can I Call for Roadside Assistance if My Tire Is Flat?

How to Handle After an Accident?

Methods for handling traffic accidents should be analyzed based on different situations, as follows: 1. No casualties: If there are no casualties after a traffic accident, and the parties involved have no disputes over the facts and causes, or only minor property damage is caused with clear basic facts, both parties can negotiate compensation matters and leave the scene on their own. If there are disputes over the facts or causes, the scene must be protected, and 122 should be called immediately to report to the traffic police. If the vehicle is insured, the insurance company should be informed promptly to come to the scene. 2. With casualties: After the accident occurs, all vehicles involved should remain in place, the accident scene should be preserved, and reports should be made immediately to the insurance company and traffic police department. If there are casualties, they should be sent to the hospital immediately. Unless the accident site is remote or no vehicles pass by, the accident vehicle should not be moved. Using the accident vehicle to transport the injured to the hospital may result in an inability to determine accident liability.

12

2

Share

Do You Need to Shift to Neutral for Electronic Parking Brake?

Using the auto-hold function does not require shifting to neutral. There is no regulation stating that the car must be in neutral to use the auto-hold function; you can remain in D gear. Below is an introduction to the auto-hold function: 1. English name is AUTO-HOLD: This button is usually located on the car's center console, often next to the electronic parking brake for most models. The AUTO-HOLD function is not enabled by default. If you want to use the AUTO-HOLD function, the driver needs to manually activate it. After enabling the auto-hold function, every time you press the brake to bring the car to a complete stop, an indicator light will illuminate on the dashboard. When the light is on, you can release the brake pedal, and the system will automatically assist the driver in maintaining the brake. 2. Deactivating the auto-hold function: Simply press the brake pedal lightly, and the system will automatically deactivate. For cars frequently driven in urban areas, this function is very convenient. If you choose not to use the auto-hold function, you can shift to neutral for brief stops in an automatic transmission car. Using neutral is beneficial for the car's clutch plates. If you are parking and turning off the engine, it is best to shift the gear to P (Park), which locks the transmission gears with the wheels, and simultaneously engage the handbrake or electronic parking brake to prevent the car from rolling.

5

2

Share

What to Do When Your Car Has No Power?

Here are solutions for when your car has no power: 1. Push-starting: Push-starting depends on the situation, as not all road conditions are suitable. Generally, a downhill slope in front of the car makes push-starting much easier, helping the vehicle accelerate; whereas an uphill slope makes it exhausting and difficult to gain speed. When using this method, be sure to avoid busy roads with many vehicles and pedestrians to prevent accidents after the car starts. 2. Towing-starting: This method is similar to push-starting and is also commonly used, but towing with another vehicle is often much easier and more convenient. During operation, use a tow rope of appropriate length and secure both ends firmly. Before towing, the drivers of both vehicles should agree on signals for operations, such as honking or hand gestures for starting and stopping, to ensure coordination. 3. Jump-starting: To use the jump-starting method, you first need to have a set of jumper cables in your car. Then, all you need is to ask another vehicle on the road for help to restart the battery.

20

5

Share

Why does the car make a creaking noise when turning?

Car making a creaking noise when turning may be caused by the following faults: 1. Friction between plastic parts: Since the steering wheel is usually composed of plastic parts, if the temperature drops, the plastic may harden and produce friction noise. 2. Aging of the steering tie rod ball joint: If the steering tie rod ball joint ages, it can cause the car's steering wheel to shake and produce noise. This situation usually requires replacing the steering tie rod ball joint and performing a four-wheel alignment after replacement. 3. Steering gear failure: If there is a very loud noise when turning, it may be caused by excessive gear clearance in the steering gear, requiring replacement of the steering gear.

16

2

Share

What is the fuel consumption of the VV7?

Great Wall VV7's fuel consumption per 100 kilometers is generally around 8-10 liters under comprehensive conditions. 1. Introduction to Great Wall Motors: Since 2006, Great Wall Motors has established a development strategy focused on compact A-segment cars with small displacement. Its philosophy for car manufacturing is very clear: not to produce low-quality and low-priced cars, but to create products with high standards, global versions, and compliance with international regulations. 2. Global simultaneous launch: In the Chinese automotive market, the phrase 'global simultaneous launch' is often mentioned when referring to the release of globally renowned cars. However, this phrase rarely applies to Chinese cars, as few foreign models are introduced in China. Great Wall aims to change this history. In June 2007, one of the first models in its lineup was launched. Subsequently, a new model will be introduced every 2-3 months. 3. Return to Chinese elements: Chinese elements are becoming increasingly valuable. At the recent Beijing Auto Show, new models incorporating Chinese elements, such as the Chrysler 300C Ruyi and the Smart Year of the Dragon Special Edition, were showcased. BYD even named its second-generation dual-mode electric vehicle 'Qin.' Although more communication efforts are needed to establish this distinctly dynastic Chinese character as a car's identity, the naming of 'Qin' is indeed a stroke of genius, vividly embodying Chinese elements.

11

3

Share

What is the Principle of Tire Pressure Monitoring?

The principle of tire pressure monitoring is as follows: 1. Indirect Tire Pressure Monitoring System: It monitors tire pressure by comparing the rotational speed differences between tires. 2. Direct Tire Pressure Monitoring System: It involves installing four tire pressure monitoring sensors inside the tires to automatically monitor tire pressure and temperature in real-time, whether the vehicle is stationary or in motion. It also provides timely alerts for high pressure, low pressure, and high temperature in the tires to prevent traffic accidents caused by tire failures, ensuring driving safety. Additional Information: The Tire Pressure Monitoring System is abbreviated as "TPMS," short for "tire-pressure-monitoring-system." This technology can automatically monitor various tire conditions in real-time by recording tire rotation speeds or using electronic sensors installed in the tires, providing effective safety assurance for driving.

17

0

Share

Can I Call for Roadside Assistance if My Tire Is Flat?

How to Handle After an Accident?

Do You Need to Shift to Neutral for Electronic Parking Brake?

What to Do When Your Car Has No Power?

Why does the car make a creaking noise when turning?

What is the fuel consumption of the VV7?

What is the Principle of Tire Pressure Monitoring?

What is the weight of the Volkswagen Lavida?

What Does the Whole Vehicle Warranty Include?

What size screw is used for the Cruze camshaft solenoid valve?

When will the Ford Explorer be domestically produced?