Can I Bring My Phone into the Car During the Subject 3 Driving Test?

How to reset the tire pressure warning light on a 2017 Outlander?

The method to reset the tire pressure warning light on a 2017 Outlander: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "dong" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid over-inflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as the tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and valve core are not properly aligned, have protrusions or depressions, or other defects, it may be difficult to inflate or measure the pressure. Pay attention to cleanliness when inflating. The air being pumped in should not contain moisture or oil, as this could deteriorate and damage the inner tube rubber. Do not exceed the standard pressure too much when inflating and then release air, nor should you over-inflate the tires because you haven't been able to inflate them for a long time while traveling. Exceeding the standard pressure too much can cause the cords to overstretch, reducing their strength and affecting the tire's lifespan.

17

2

Share

How to Reset the Maintenance Indicator on Volkswagen Lamando?

Volkswagen Lamando Maintenance Light Reset Procedure: 1. Turn off the ignition switch and stop the engine. 2. Press and hold the "0.0" button (reset button) on the instrument panel. 3. Turn on the ignition switch while keeping the "0.0" button pressed. 4. Release the "0.0" button when one of the following messages appears on the instrument cluster display. 5. Press the "0.0" button again to confirm (single press is sufficient). 6. Check if the maintenance light has been reset. If not, restart the procedure from the beginning. 7. For infotainment system maintenance messages: Press CAR → Settings → Maintenance → Reset Maintenance Information → Confirm.

14

4

Share

How to adjust the low beam height of the 10th generation Accord?

10th generation Accord low beam height adjustment method: You can open the engine compartment and locate the adjustment nut behind the headlight for adjustment. Below is an introduction to low beams: 1. Low beams are car lights used for short-distance illumination, with a range of only 30 to 40 meters, and the focus cannot be adjusted. 2. Experiments show that when a vehicle travels at 55 kilometers per hour at night and brakes immediately upon detecting an obstacle ahead, the stopping distance is 30 meters. This indicates that even if you stop immediately upon spotting an obstacle within the low beam's range, there is no distance left between the car and the obstacle. 3. Therefore, it is essential to control speed when driving at night and alternate between high beams and low beams. This allows timely detection of obstacles ahead without affecting the visibility of oncoming vehicles when using the lights.

1

5

Share

How to Identify the Quality of a Used Car?

Here are specific methods to identify the quality of a used car: 1. Carefully inspect the exterior. For any accident vehicle, after major repairs, there will be noticeable differences in the gaps between body panels and the car's waistline. 2. Check the doors. Doors that have not been disassembled should open and close smoothly. Doors that have been disassembled multiple times will not only be difficult to open and close but may also have damaged seals, and in severe cases, the door may not close properly without applying force. After pulling down the door seal, normal vehicles should have weld points that are perfectly round and slightly recessed. If the weld points are rough and unevenly arranged, and there is a color difference in the paint on both sides of the A-pillar, B-pillar, and C-pillar, it can be confirmed that the car is an accident vehicle. 3. Open the engine compartment for a thorough inspection. Check the longitudinal beams for deformation, cuts, or deformation of energy-absorbing holes, look for signs of screw movement on the shock absorber suspension, inspect the sealant and weld points, and examine the radiator support and radiator for signs of repair or replacement after collision deformation. If any are found, the radiator must have been repaired or replaced. Damage to the radiator support may affect the engine or frame, so pay attention to the inspection of related components. 4. Inspect the A, B, C, and D pillars. Look for deformation, cuts, sheet metal repairs, and paint conditions. If any are found, the vehicle likely has been involved in a major accident.

9

3

Share

What are the considerations for sitting in the front passenger seat?

Considerations for sitting in the front passenger seat are as follows: 1. Do not hold a child: Children under 12 years old are not allowed to sit in the front passenger seat, nor can you hold a child there. Firstly, it is not permitted by law, and secondly, it is very unsafe. 2. Wear a seatbelt: If you do not wear a seatbelt, in the event of a sudden brake, you could be thrown out of the vehicle. Precautions for sitting in the front passenger seat are as follows: 1. Avoid controversial topics: Do not discuss controversial topics with the driver, as people can easily lose control of their emotions during arguments. If the driver loses emotional control, it could lead to loss of control of the vehicle. Therefore, if you want to chat with the driver, choose mild and soothing topics that can relax the driver. Never challenge the driver's emotional control or engage in arguments that could put the driver in a bad mood. 2. Proper use of the seatbelt: The front passenger seat is generally more comfortable and spacious, offering a good view of the scenery ahead. As a result, passengers in this seat tend to be more relaxed. For example, they might recline the seatback very low, almost turning it into a lounge chair, while still wearing the seatbelt. This method of using the seatbelt is akin to putting a noose around your neck. In case of an emergency or sudden braking, the passenger in this position could lunge forward due to inertia, causing the seatbelt to tighten around their neck, which could be severely dangerous or even fatal.

15

3

Share

Where is the start button for the Audi A4L?

Audi A4L's start button is located between the driver and front passenger seats. The Audi A4L features a one-button start system. After getting in the car, fasten your seatbelt, press the brake pedal, and then press the start button. Below are some related features: 1. The Audi A4L offers spacious overall interior with comfortable seats, and its rear seat space is larger than that of the Crown and BMW 3 Series. 2. The Audi A4L provides comfortable handling with a sporty orientation, wide visibility, and a steering wheel with good tactile feedback. It has excellent tire grip, a solid chassis, and good off-road capability. The brakes are responsive, and noise levels are low. 3. The Audi A4L is equipped with two new green-efficient engines, featuring advanced technology, ample power output, stable acceleration, and impressive speed increase performance.

19

4

Share

Can I Bring My Phone into the Car During the Subject 3 Driving Test?

How to reset the tire pressure warning light on a 2017 Outlander?

How to Reset the Maintenance Indicator on Volkswagen Lamando?

How to adjust the low beam height of the 10th generation Accord?

How to Identify the Quality of a Used Car?

What are the considerations for sitting in the front passenger seat?

Where is the start button for the Audi A4L?

How to Adjust the Valve Clearance of the Aowei 13-liter Engine?

What is the refrigerant in the air conditioner called?

Which brand is the transmission of the Volvo S90?

What does the classic Focus fault code p2008 mean?