···
Log in / Register

Can I Bring a Mobile Phone into the Subject 3 Exam Room?

3 Answers
OJulianna
07/30/25 2:45am
It depends on the requirements of the local examination center. You can ask your instructor in advance. Allowed to bring a mobile phone: You can bring a mobile phone, but it must be on silent mode, turned off, or in airplane mode. Otherwise, if it makes any noise during the exam, it will be considered cheating, resulting in exam failure. Prohibited from bringing a mobile phone: The instructor clearly states that carrying a mobile phone is not allowed. It must be stored in a designated locker or handed over to the instructor for safekeeping. In some places, bringing a mobile phone into the vehicle will directly disqualify you from the exam. Passing criteria: The full scores for the Subject 3 road driving skills test and the safe and civilized driving knowledge test are 100 points each. A score of 90 points or above in each is required to pass.
Was this review help?
3
0
Share
LaElaina
08/16/25 9:02am
When I took the driving test (Subject 3) back then, the instructor repeatedly warned us not to bring phones into the exam area. The day before the test, I deliberately left my phone in the car. However, one candidate from the same batch forgot and kept it in their pocket. The phone rang as soon as they started the test, and the examiner issued an on-the-spot warning, nearly disqualifying them. This incident made me realize how strict the rules are—phones can distract attention and pose safety risks. Testing centers enforce strict regulations requiring candidates to either power off their phones or store them to prevent cheating. Later, I heard from other trainees that many test centers have security checks at the entrance, allowing entry only after storing phones in lockers or bags. Bringing a phone inside could result in point deductions or even retesting, causing significant frustration and setbacks. My advice: store your phone in advance on test day—focusing on the driving task is far more important. No matter how essential your phone is, enduring without it temporarily ensures a smoother and more stress-free exam experience.
Was this review help?
17
4
Share
Expand All
VanCarter
10/21/25 8:05am
I often help friends prepare for their driving tests, and everyone discusses whether they can bring their phones for Subject 3. From experience, it's absolutely not allowed—the exam rules clearly prohibit electronic devices in black and white. During the test, you must stay focused on road conditions and follow instructions; a phone vibration could distract you, leading to mistakes like accidentally hitting the brakes or forgetting to signal, resulting in failure. Moreover, the exam site is crowded, and if someone takes photos to cheat, the entire group could be affected. I've seen test-takers get into trouble for hiding phones, but it's better than causing issues mid-exam. The exam entrance usually has signs indicating storage areas—it's best to power off your phone in advance and store it in a backpack or hand it to an accompanying person. Safety first—don't take chances. Staying focused on the operation is key. Being well-prepared reduces psychological pressure and increases success rates.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

What to Do When Wiper Blades Don't Clean Properly?

Here are the reasons why wiper blades don't clean properly: 1. Dirty windshield: Inadequate cleaning of the windshield during regular car washes can leave sticky particles on the glass, preventing the wiper from cleaning effectively and potentially damaging it. The solution is to visit a car wash for a thorough windshield cleaning. 2. Hardened wiper blades: Aging wiper blades can harden. You can replace them with new ones or clean the wiper with a lubricant. 3. Misaligned wiper arm: Adjust the angle of the wiper arm. Use an adjustment wrench to hold the wiper and gently rotate it to align it properly, or seek professional help at a repair shop. 4. Frozen wiper blades: Wiper blades, usually made of rubber, can freeze and harden in cold winter temperatures. After starting the car, direct some warm air to the windshield to raise its temperature slightly before using the wipers.
20
3
Share

How to Deal with Frost on Cars in Winter?

Here are the methods to handle frost on cars in winter: 1. Turn on the car's air conditioning and set it to external circulation or direct the vents toward the windows. 2. Use a specialized plastic scraper for removing frost and snow from vehicles, gently scraping the frost off the glass in one direction. A bank card can also serve as a substitute, but be careful to avoid scratching the glass. 3. Apply a specialized vehicle defroster spray onto the frosted windows. Vehicle defroster sprays are high-speed anti-ice concentrated solutions designed to thaw frozen windows and wipers without damaging the car's surface, and they help prevent re-freezing. 4. Use a dedicated frost cover to shield the car. 5. Open the car doors to ventilate and equalize the temperature inside and outside the vehicle.
13
0
Share

How to Turn On the Rear Window Wiper?

The method to turn on the rear window wiper mainly includes: 1. Adjust the wiper switch forward and backward to switch between front and rear wipers, and adjust up and down to change the wiper speed. 2. Push the wiper switch one notch toward the driver to adjust the front windshield wiper, and push another notch to activate the front windshield cleaning function. 3. Push the switch one notch toward the front of the car to adjust the rear glass wiper, and adjust the wiper speed by moving it up and down after pushing the notch. Additional note: It is recommended not to use the rear window wiper frequently because the rear window is more prone to accumulating dust and dirt, and it does not have a cleaning function. Using it on non-rainy days may cause scratches on the glass.
15
1
Share

How to reset the maintenance light on the Jetour X90?

Here are the steps to reset the maintenance light on the Jetour X90: 1. Turn off the ignition switch and hold down the mode switch. 2. Turn on the ignition switch and then release the mode switch. 3. Within 30 seconds, simultaneously press the mode switch and the clock switch (press time < 2s), and the maintenance light will be reset. Here are the reasons why the engine maintenance light may illuminate on the Jetour X90: 1. Carbon deposits in the intake tract or on the piston top can cause poor atomization, leading to incomplete combustion and triggering the pollution light. 2. Faults in the sensor or the computer board itself can cause the pollution light to illuminate.
14
2
Share

What are the power specifications of the Lynk & Co 03+?

The Lynk & Co 03+ is equipped with a 2.0T turbocharged engine. The 03+ features a high-power version of the 2.0T turbocharged engine, which delivers a maximum power output of 187kW. As the first high-performance model launched by Lynk & Co, the 03+ boasts a maximum torque of 350Nm, paired with an 8-speed automatic transmission that matches the engine perfectly. Additional Information: While pursuing speed and handling, the Lynk & Co 03+ also provides enhanced safety protection. It comes with globally leading active and passive safety systems and utilizes BorgWarner's fifth-generation intelligent sports all-wheel-drive system to ensure vehicle stability.
1
0
Share

Which Lights to Use in Heavy Fog?

In heavy fog, you should turn on the fog lights. If visibility is extremely low, you should also activate the hazard warning flashers. Driving in foggy conditions significantly reduces visibility and limits the driver's line of sight. Fog lights have strong light penetration, which can enhance visibility for both the driver and other road users, allowing approaching vehicles and pedestrians to spot each other from a greater distance. Fog lights are divided into front fog lights and rear fog lights. Front fog lights are typically a bright yellow color, while rear fog lights are red. The symbol for front fog lights features downward light beams, whereas the rear fog light symbol shows parallel beams. In foggy weather, both front and rear fog lights are usually used together. Fog lights are highly bright and penetrating, and they do not cause diffuse reflection due to fog. Therefore, using them correctly can effectively prevent accidents.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.