Can I apply for vehicle use during traffic restriction?

1 Answers
MacBrianna
07/30/25 10:03am
Vehicles are not allowed on the road under any circumstances during traffic restriction periods. Handling violations during vehicle restriction periods. For motor vehicles violating traffic restriction regulations (such as violating odd-even license plate restrictions) by driving during prohibited times or within restricted areas, traffic officers will impose penalties according to law and instruct the violator to immediately park the vehicle in a nearby parking lot, parking space, or drive out of the restricted area. If the driver fails to comply and continues the violation within the specified time, further penalties will be imposed upon discovery. Vehicles exempt from restrictions: Police cars, fire trucks, ambulances, engineering rescue vehicles, administrative law enforcement vehicles and dedicated tow trucks with unified markings performing duties, special operation vehicles for sanitation, landscaping, and road maintenance, and funeral vehicles from funeral parlors.
Was this review help?
1
2
Share
More Forum Discussions

What is the reason for the fan running continuously after replacing the water pump in the Tiguan?

The reason for the fan running continuously after replacing the water pump in the Tiguan is that air has entered the cooling system, which needs to be bled. Below is relevant information about the car's electric fan: 1. Electric fan control method: Unlike engine-driven fans, car electric fans need to adjust their working status based on coolant temperature. Some are controlled by the vehicle's ECU, while others operate via a thermistor switch. Different cars have different electric fan control methods. 2. Composition structure: Generally, the electric fan assembly includes the electric fan, bracket, temperature sensor, thermostat switch, relay, wiring harness, etc. If the car's electric fan fails to operate, troubleshooting can be conducted based on the above factors.
12
5
Share

How to Turn Off the Daytime Running Lights of a Car?

The method to turn off the daytime running lights of a car is: 1. Insert the key and power on the vehicle without starting the engine; 2. Move the turn signal switch to the left, pull up the high beam, hold it steady, and turn on the ignition switch for about 5 seconds; 3. After hearing a prompt sound, release the ignition switch and return it to the original position to turn off the daytime running lights. The functions of car lights are: 1. Position lights: Used during evening driving to make the vehicle visible to others; 2. Turn signals: Provide signals to other vehicles and pedestrians when turning to alert them; 3. Headlights: Consist of low beam and high beam for illumination; 4. Fog lights: Used in foggy weather as light signals; 5. Reverse lights: Serve as a reminder for pedestrians and vehicles behind; 6. Brake lights: Alert following vehicles.
20
2
Share

What is the real reputation of the MG6?

The MG6 enjoys a good reputation, with its exterior, interior, and configurations all ranking above average. The only criticism is that the suspension is too stiff. Below is an introduction to the MG6: 1. Overview: The all-new MG6 is the first mass-produced model based on SAIC MG's 'Emotional Force' concept car, MG E-Motion, officially launched on November 3, 2017. 2. Exterior: The new car features MG's latest family-style front face, with a shield-shaped front grille paired with sharp headlight clusters, exuding a bold and imposing look. The headlight clusters continue to adopt the same 'London Eye' design as seen in the MG ZS. 3. Performance: Equipped with SAIC's NetBlue Blue Core high-efficiency powertrain technology, the all-new MG6 boasts a '6-second powertrain and 36-meter braking system,' with the XDS cornering dynamic control system as standard across the entire lineup.
12
5
Share

What does the car tire pressure warning symbol look like?

The car tire pressure warning symbol is an exclamation mark inside an irregular arc. Here are the reasons why the tire pressure warning light may illuminate: Tire pressure monitoring light due to a punctured tire: This situation usually involves very slow air leakage, making it difficult to immediately identify which tire is losing pressure. In such cases, a tire pressure gauge can be used to measure the pressure. Tire pressure monitoring light due to prolonged driving with low tire pressure: This typically occurs when a tire's pressure is too low, causing the tire temperature to rise during high-speed operation, which in turn increases the tire pressure. In this situation, it is advisable to stop and rest promptly or replace the tire with a spare. Tire pressure monitoring light due to prolonged underinflation: When the tire pressure drops below 1.8 bar, the tire pressure monitoring light will illuminate. Therefore, regular checks should be performed to ensure the tire pressure monitor is functioning properly. If the tire pressure monitor does not alert you promptly when an issue arises, it may indicate a problem with the monitor itself.
15
1
Share

Can Coolant Colors Be Mixed?

Coolant colors cannot be mixed. Mixing coolants with different chemical compositions can cause chemical reactions, rendering the coolant ineffective. The correct method for adding coolant is as follows: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the coolant; 2. Insert a rubber hose into the radiator filler neck and flush the engine cooling system with tap water; 3. After draining the water from the cooling system, close the radiator drain valve; 4. Unscrew the reservoir cap and add coolant until the liquid level reaches the MAX mark; 5. Tighten the reservoir cap; 6. Start the engine and let it idle for 2 to 3 minutes, then unscrew the radiator cap to allow the cooling system to expel some air. The coolant level will drop, so top it up again to the MAX mark.
9
2
Share

How is the four-wheel drive performance of the Explorer?

The four-wheel drive performance of the Explorer is excellent, making it a top-tier off-road vehicle. Here are some key details about the Explorer: 1. Vehicle Positioning: The Ford Explorer is a mid-to-large-sized SUV. 2. Interior Features: It comes with a 12.8-inch vertical touchscreen equipped with the SYNC+2.0 infotainment system, offering functions like GPS navigation, voice recognition control, and multimedia entertainment. Additionally, the L2-level Ford Co-Pilot360 driver assistance system is standard across all models. 3. Powertrain: All models feature a high-spec 2.3T+10AT powertrain combination, with the engine delivering a maximum power of 276 horsepower and a maximum torque of 425 Nm. The rear-wheel-drive model can accelerate from 0 to 100 km/h in just 7.6 seconds. Except for the base model, all other models come with a four-wheel-drive system, and the fuel consumption is around 12L per 100 km.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.