Can I Apply for the Inspection Exemption Label for Vehicles on 12123?

1 Answers
KeiraMarie
07/29/25 2:56pm
You can apply for the inspection exemption label for vehicles on the 12123 platform, as it is a comprehensive traffic management platform that handles not only driver's license tests but also vehicle annual inspection matters. Below is the relevant information about vehicle annual inspection: Content: Check whether the engine, chassis, body, and their auxiliary equipment are clean, complete, and effective; whether the paint surface is uniform and aesthetically pleasing; whether the main assemblies have been replaced; and whether they match the initial inspection records. Relevant procedures: For vehicles that cannot undergo inspection on schedule due to long-term tasks in other locations, the owner should submit an application. The local vehicle management office will then entrust the vehicle management office at the task location to conduct the inspection on their behalf. After the inspection, the results will be reported back to the original vehicle management office. Vehicles that cannot undergo annual inspection on schedule due to special circumstances should apply for an extension in advance with the local vehicle management office.
Was this review help?
6
3
Share
More Forum Discussions

What is the model number of the Jimny differential oil?

The model number of the Jimny differential oil is Mobil 3309. Differential service life: Under normal driving conditions, the differential transmission oil should be replaced every 2 years or 60,000 kilometers. For specific details, please refer to the vehicle's maintenance manual. Precautions for differential use: The differential oil is used to keep the gear system clean and ensures the normal operation of the transmission while extending the lifespan of the transmission components. Failure to replace the differential oil regularly can lead to: impurities forming due to chemical changes in the differential oil, causing oil passage blockages and affecting gear shifting functionality. Long-term high-temperature operation reduces the lubricating properties of the transmission oil, which can easily lead to clutch plate wear and cause stalling.
2
5
Share

Can an expired driver's license be renewed on 12123?

An expired driver's license cannot be renewed on 12123. Below are specific details regarding expired driver's licenses: 1. Failure to undergo inspection for three consecutive scoring cycles: The vehicle management office will notify the holder to complete the downgrade procedure within 30 days. If the holder still fails to comply after notification, the downgrade will be announced. 2. Driving a motor vehicle without undergoing the required inspection within the specified period: A fine will be imposed. 3. Being involved in a traffic accident while driving a motor vehicle without undergoing the required inspection: The commercial insurance may refuse to cover the claim. 4. Documents required for renewal: Original and photocopy of ID card, original driver's license, several one-inch white-background color photos, and the "Motor Vehicle Driver's Physical Condition Certificate."
16
4
Share

Why does the system still show 3 points after a successful point deduction?

If the system still shows 3 points after a successful point deduction, it is because the system has not updated in time. The update can be completed within 48 hours. Below are detailed explanations about the point deduction through learning: 1. Introduction: "Point deduction through learning" is a measure for drivers holding a driver's license who have been penalized for traffic violations. After participating in online traffic safety learning and passing the exam, their penalty points can be reduced. This initiative is a convenient traffic management measure uniformly deployed by the Traffic Management Bureau of the Ministry of Public Security. 2. Eligibility: Motor vehicle drivers who participate in road traffic safety laws, regulations, and related knowledge learning organized by the traffic management departments of public security authorities and pass the exam, or those who participate in traffic safety public welfare activities in the place where their driver's license was issued and meet relevant requirements, can apply for a reduction in traffic violation penalty points.
8
4
Share

Should the low beam be turned up or down?

The low beam is turned up. Below are specific details about the low beam of motor vehicles: 1. Usage: The high beam of a car is generally suitable for use when driving at night on roads without streetlights or with poor lighting, such as on dimly lit national highways or expressways. In urban areas where lighting is good, the low beam must be used. 2. Relevant lighting regulations: When driving at night without streetlights and under poor lighting conditions, turn on the high beam; when following another vehicle closely in the same direction at night, turn on the low beam; when passing over an arch bridge or a crosswalk at night, alternate between low and high beams; when passing through an intersection without traffic signals at night, alternate between low and high beams; when navigating sharp curves or slopes at night, flash the low and high beams twice consecutively; when driving in foggy conditions, turn on the small lights, fog lights, and hazard lights.
5
0
Share

How many times does the Verna need to crank before starting?

The Verna normally starts with just one crank. Symptoms of hard starting in Verna: If the engine takes more than 30 seconds to start each time or requires over 10 consecutive cranks to start, these are considered symptoms of hard starting in vehicles. Troubleshooting methods for hard starting: Hard starting issues should be addressed promptly to prevent damage to other components. Incorrect starting methods may cause this, such as: not closing the choke during cold starts, or not pressing the float depressurizer, resulting in an overly lean air-fuel mixture entering the cylinder; or closing the choke during warm starts, or pressing the float depressurizer multiple times, causing an overly rich mixture that floods the spark plug, preventing engine start. In such cases, open the choke and decompression valve, or remove the spark plug, turn the engine to clear excess fuel from the cylinder, then restart.
8
3
Share

What is the break-in period for the BYD F3 in kilometers?

The break-in period for the BYD F3 is generally between 2,500 kilometers and 3,500 kilometers, with the engine speed roughly controlled around 2,500 RPM. The break-in period usually refers to the process where mechanical components initially come into contact, rub against each other, and mesh during operation. The vehicle break-in process generally consists of two steps: 1. For the machining process, the metal friction surfaces undergo a break-in to develop waveforms and shapes. 2. The metal friction surfaces of the engine, transmission, and other metal components undergo a roughness break-in to achieve a certain surface roughness value. Precautions during the vehicle break-in period: 1. Avoid overloading the vehicle. 2. Do not drive at high speeds. 3. Use high-quality gasoline. 4. Modern automotive manufacturing processes have advanced to the point where vehicles may not require a break-in period.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.