Can I apply for a replacement vehicle registration certificate on 12123?

1 Answers
DiDavid
07/29/25 2:24pm
To apply for a replacement vehicle license, you need to go to the vehicle management office and bring the vehicle registration certificate, the owner's ID card, and the owner must go in person. The specific requirements are as follows: 1. Vehicle inspection: According to regulations, for replacing the vehicle registration certificate, the vehicle must also be inspected. The vehicle management office will confirm the vehicle, review the submitted documents and certificates, and issue a replacement vehicle registration certificate within one day from the date of acceptance. 2. Replacement of vehicle registration certificate: The owner should bring the required documents and drive the vehicle to the vehicle management office or service station at the vehicle's registration location. The vehicle should go through a dedicated inspection channel directly to the inspection point to start the inspection. The vehicle management office staff will inspect the vehicle. After the inspection is completed, the owner should confirm the information at the inspection service office.
Was this review help?
15
1
Share
More Forum Discussions

How to turn off the constantly lit differential lock light on the Prado?

When road conditions improve (the road becomes better), release the accelerator pedal while driving at low speed or maintaining a steady speed. Press the differential lock switch and steer appropriately. The indicator light will turn off, indicating that the differential has been disengaged. When the vehicle is at low speed or stationary, press the differential lock switch, release the accelerator pedal, and steer appropriately. The indicator light will turn on, indicating that the differential has been properly engaged. The instrument panel will simultaneously emit a beeping sound to alert the driver that the inter-wheel differential lock is in the activated state.
20
0
Share

How to Turn on the Rear Air Conditioning in the Prado?

Press the one-touch start button below the steering wheel to start the vehicle's engine; locate the rear air conditioning control system in front of the rear seats. Press the 'off' button on the rear air conditioning control panel to turn on the air conditioning; then press the 'temp up' button on the rear air conditioning panel.
15
3
Share

What are the detailed steps for removing a car door?

First, prepare the necessary tools for removal. Start by removing the two plastic pins. Use a tool to press the center point inward, then pry them out with scissors. Be sure to press the center point firmly. Next, use the prepared tools to loosen the remaining two screws and remove them. After removing all screws and pins, grip the door firmly and pull it towards you with force to detach the entire door.
6
2
Share

How to Resolve BMW Driving Stability Failure?

First, pull over to the side of the road, then turn off the engine, lock the car, and wait for 15 minutes before restarting to see if the warning disappears. If it doesn't, turn off the engine and lock the car again, wait for another 15 minutes, and then restart. If the issue persists, call BMW's 400 customer service hotline for assistance.
20
1
Share

Where are the clutch and brake located in a C1 license vehicle?

Manual transmission vehicles have three pedals, arranged from left to right as follows: clutch pedal, brake pedal, and accelerator pedal. In a manual transmission car, the driver uses the left foot to operate the clutch and the right foot to control the brake and accelerator. When starting the vehicle, first start the engine. Press the clutch pedal fully with the left foot, shift into first gear, release the handbrake, and slowly release the clutch to the half-clutch position. If the RPM on the dashboard fluctuates slightly or the vehicle shows signs of moving, gently press the accelerator with the right foot while continuing to steadily release the clutch with the left foot. Once the vehicle starts moving, quickly lift the clutch. While driving, the left foot should not rest on the brake pedal. In manual transmission vehicles, the left foot should only press the clutch pedal when shifting gears. During normal driving, the left foot should not rest on any pedal. Both the brake and accelerator are controlled by the right foot. There are two key reasons why the left foot should not rest on the pedal: 1. During long drives, both feet can become fatigued, leading to unintentional pressing. If the left foot is on the brake pedal, accidentally pressing it can easily cause an accident. 2. Most people are right-handed, so the right foot reacts faster. In an emergency, the right foot can quickly respond by lifting the accelerator and pressing the brake. If the left foot is on the brake pedal, the right foot would be suspended, making it easy to press both pedals simultaneously, which is dangerous. Additional information about car brakes and accelerators: The brake is a mechanical device that slows down the vehicle, also known as a decelerator. The brake pedal is located under the steering wheel. Pressing it activates the brake linkage, which presses the brake pads against the brake disc, slowing or stopping the vehicle. The accelerator controls the fuel supply in an internal combustion engine. In cars, the accelerator is typically controlled by a pedal, also called the throttle, which regulates the engine's fuel supply. When pressing the brake or accelerator, the body needs support to maintain balance. The right foot operates the pedals while the left foot stabilizes the body on the floor. If both feet are on the pedals, they are semi-suspended, lacking a stable point of support, which can lead to unstable braking or acceleration. Important tips for novice drivers: 1. Use turn signals early when changing lanes or turning: Lights and horns are the language of driving. Communicate your intentions early, especially as a beginner. Always signal in advance and avoid changing lanes or turning immediately after activating the signal. 2. Follow proper overtaking procedures: When overtaking, signal left early and use high beams or honk. On roads with no centerline or only one lane, the front vehicle should slow down and move right to allow overtaking. The overtaking vehicle should pass on the left and return to the original lane only after maintaining a safe distance. 3. Check surroundings before reversing: Before reversing, inspect the area around the vehicle. Do not rely solely on mirrors, parking sensors, or cameras. If someone is guiding you, they should stand beside the vehicle, not behind it, to avoid being hit. 4. Slow down and observe at intersections: Intersections are complex with vehicles, pedestrians, and cyclists from all directions. Always look around and slow down, regardless of traffic lights, to ensure no one is crossing before proceeding. 5. Check for tailgaters before braking hard: During emergency braking, check for vehicles behind you. Maintain a safe distance to avoid rear-end collisions. 6. Keep a safe distance from the vehicle ahead: Road conditions can change suddenly. Control your speed and maintain a safe distance to react to sudden stops or lane changes by other vehicles. 7. Slow down and check surroundings when turning: Reduce speed when turning and use mirrors to check for pedestrians or cyclists. Yield to them to avoid collisions. 8. Drive in the middle lane when possible: On roads without a central divider, the middle lane provides time to react to oncoming traffic. On divided roads, it allows time to respond to sudden appearances from the divider. At night, it prevents being blinded by opposing headlights. 9. Slow down and honk in poor visibility: In low-visibility conditions or weather, honk and reduce speed to ensure safe passage. 10. Slow down near parked large vehicles: Large vehicles block visibility, hiding pedestrians or vehicles that may suddenly emerge. Slow down and proceed only when safe.
8
1
Share

How to Activate BMW's Voice Assistant?

By clicking on the vehicle's central control screen, select "My Vehicle"; enter the interface, click "Settings", and find "General Settings". In the new interface, click the "Language" option; finally, check the box to use "Hey BMW" to start voice dialogue and complete the setup. After the BMW voice function is activated, it can be used for functions such as navigation search, music playback, and phone calls.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.