Can I Apply for a Replacement Driver's License on 12123 If It's Lost?

1 Answers
WyattFitz
07/30/25 1:49am
You cannot apply for a replacement driver's license on 12123 if it's lost. In case of a lost driver's license, you should visit the local vehicle management office (anywhere is acceptable). According to national regulations, if an motor vehicle driver's license is lost, the driver should apply for a replacement at the vehicle management office where the license was originally issued or any other vehicle management office outside the issuing area. When applying, you need to fill out an application form and submit the driver's identity proof along with a written statement declaring the loss of the driver's license. If the application meets the requirements, the vehicle management office will issue a replacement driver's license within one day. Materials required for driver's license replacement include: identity proof (the driver's identity proof), application form (motor vehicle driver's license application form), photos (four one-inch color front-facing photos with a white background and no hat), original and photocopy of identity proof (if applying through an agent, the agent's original and photocopy of identity proof are also required). In case of a lost motor vehicle driver's license: you should apply for a replacement at the vehicle management office where the license was originally issued or any other vehicle management office outside the issuing area. Brief introduction: A driver's license, also known as a "driving license," is a document issued by the government's transportation department to individuals who qualify to drive. It is usually a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. Regarding the issue of reporting the loss: There is no need to report the loss of a driver's license. You only need to promptly apply for a replacement at the vehicle management office. However, when applying for a replacement, you need to fill out a written statement declaring the loss of the motor vehicle driver's license, confirming that the license is indeed lost and stating that any improper consequences arising from the lost license in the future are unrelated to the vehicle owner. After the replacement is completed, the original driver's license, even if found, will be considered invalid.
Was this review help?
18
4
Share
More Forum Discussions

Can Turbocharged Engine Oil Be Used in Naturally Aspirated Engines?

Turbocharged engine oil can be used in naturally aspirated engines. Full Synthetic Oil: Full synthetic oil is of higher quality, and its usage can bring noticeable improvements in the following aspects: smoother cold starts, better fuel efficiency, longer oil change intervals (approximately 1.5 times or more compared to conventional lubricants), extended engine lifespan, reduced maintenance frequency, and cleaner engine cylinders due to its superior detergency. Semi-Synthetic Oil: Semi-synthetic oil is formulated using semi-synthetic base oil, specifically Group III base oil refined through hydrocracking technology. It is a blend of mineral oil and full synthetic oil in a 4:6 ratio. The purity of semi-synthetic oil is very close to that of full synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil.
5
3
Share

What Causes Foul Smell in Small Car Exhaust?

Small car exhaust smell can occur during hot idling or at high RPM, sometimes accompanied by weak acceleration, indicating severely excessive exhaust emissions, primarily CO over the limit. Automotive Exhaust: Automotive exhaust is a byproduct of engine combustion. After purification by the catalytic converter, normal exhaust mainly contains water vapor, nitrogen, carbon dioxide, and small amounts of nitrogen oxides. For vehicles in normal working condition, the exhaust is colorless and odorless. If the exhaust emits an unusual smell, such as a foul odor, immediate vehicle inspection and repair are necessary. Reasons for CO Overlimit: The main reason for CO overlimit is an overly rich air-fuel mixture. Excessive fuel or insufficient air intake leads to incomplete combustion of carbon in the fuel, producing CO. Normal combustion should produce CO2, which is a colorless and odorless gas. Exhaust containing excessive CO can cause oxygen sensor failure, high-temperature sintering of the catalytic converter, and even damage to the vehicle's computer. Therefore, if a vehicle's exhaust emits a foul smell, it is best to address the issue immediately to avoid greater losses.
14
3
Share

Where is the car coolant filling location?

Car coolant filling location is at the filler opening of the small reservoir under the front hood. Steps to add car coolant: 1. Open the driver's door; 2. Pull the front hood release, slowly unscrew the small reservoir cap under the hood to release internal high-pressure gas; 3. Refill coolant into the small reservoir under the hood up to the MAX mark. Function of car coolant: Circulates in the engine cooling system to provide antifreeze, anti-boil, anti-rust, and anti-corrosion effects, carrying away excess heat generated during engine operation to maintain normal working temperature.
18
0
Share

How to Turn on the High Beam on a Chevrolet Cavalier?

To turn on the high beam on a Chevrolet Cavalier: 1. Pull the left control lever toward the driver to activate the high beam; 2. Push the lever away from the driver to keep the high beam on continuously. Taking the 2020 Chevrolet Cavalier as an example, it is a compact car with body dimensions of 4474mm in length, 1730mm in width, and 1471mm in height, a wheelbase of 2600mm, and a fuel tank capacity of 36 liters. The 2020 Chevrolet Cavalier is equipped with a 1.0T turbocharged engine, delivering a maximum horsepower of 125PS, a maximum power of 92kW, and a maximum torque of 180Nm, paired with a 6-speed automatic transmission.
16
0
Share

Is it necessary to straighten the car head when reversing into the left-side parking space?

It is not necessary to straighten the car head when reversing into the left-side parking space. Reversing into the parking space: Reversing into the parking space is a mandatory test item for obtaining a small car driving license after 2013, mainly assessing the driver's ability to operate the vehicle in a confined space. It is a key assessment point in the driver's test, requiring the driver to correctly reverse the vehicle into the parking space from both sides while in motion. Penalty points for reversing into the parking space: Exceeding the 210-second time limit, not following the prescribed route or sequence, failing to drive the front wheels over the control line before reversing, or not fully entering the parking space will result in a 100-point deduction. Stopping for more than 2 seconds during the process will result in a 5-point deduction each time. Key points for the reversing into the parking space test: Accurately judge the vehicle's position and operate the vehicle to correctly reverse into and exit the parking space from both sides by referring to the ground markings. During the test, the vehicle must not stop while moving forward or backward. The driver must reverse from one end of the road (with the vehicle crossing the control line) into the parking space and stop; then move forward out of the parking space, pass the control line at the other end, and reverse into the parking space again to stop; finally, move forward out of the parking space.
14
2
Share

How to Prevent Accidental Pressing of the Accelerator While Driving?

Methods to prevent accidentally pressing the accelerator while driving include: 1. Develop the habit of resting your right foot on the brake pedal when not in use; 2. Avoid sitting too close to the steering wheel; 3. Stay focused; 4. Familiarize yourself with the vehicle's structure and performance; 5. Be cautious about the left-right reversal when reversing. The functions of the accelerator are: 1. Controlling the engine speed by adjusting the amount of pedal press; 2. The accelerator regulates the carburetor to determine the engine's output power. The working principle of the accelerator is: Pressing the accelerator pedal directly controls the throttle valve, increasing the throttle opening, which allows more air to enter the engine. At this point, the ECU commands the fuel injection system to inject more fuel, thereby increasing the engine's speed and accelerating the vehicle.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.