Can I Add Tap Water to the Chery Tiggo 3's Radiator?

What is the left-to-right order of brake, clutch, and accelerator?

In a manual transmission car, the order of clutch, brake, and accelerator from left to right is: the far right is the accelerator pedal for speeding up, the middle is the brake for stopping, and the left is the clutch for disengaging power from the engine to the transmission. In actual operation, the sequence of using the brake and clutch significantly impacts the car. For example, frequently pressing the brake and clutch simultaneously can severely shorten their lifespan and, in serious cases, endanger lives. Therefore, it is crucial to use the brake and clutch correctly. Here is additional information: Correct operation: When decelerating at high speeds, you should still press the brake first, then the clutch, before shifting gears. When braking, it's essential to use intermittent braking (pump the brakes) for better braking effect, a smoother ride, and to protect the car. Never perform emergency braking on highways, as a car moving at high speed requires a normal braking distance. Emergency braking may lead to rear-end collisions with following vehicles, posing serious life-threatening risks.

17

0

Share

What are the reasons why a motorcycle has electricity but the start button does not respond?

There are several reasons why a motorcycle has electricity but the start button does not respond: Leakage issues in the cylinder piston or valves, problems with the carburetor adjustment ratio, or excessive spark plug gap. Specific reasons and solutions are as follows: Leakage in the cylinder piston or valves: When there is leakage in these two parts, the motorcycle may experience unstable idling, leading to difficulty in starting. The sealing between parts can be improved by replacing the piston rings. Carburetor adjustment ratio problem: If the carburetor adjustment ratio is too small, the fuel output may be insufficient, and the generated energy may not be enough to start the engine. Normally, the center electrode of the spark plug should be brick-red. The owner can increase the gasoline ratio in the mixture by turning the carburetor nut and then observe the color of the spark plug center electrode for adjustment. Excessive spark plug gap: If the spark plug gap is too large, its ignition ability may be relatively reduced. The spark plug can be removed, and the gap can be slightly adjusted smaller with tweezers to improve the ignition focus point and reduce starting difficulty.

19

1

Share

What is the difference between first-class and second-class sleepers on the D703?

The differences between first-class and second-class sleepers on the D703 are as follows: 1. In terms of activity space: A first-class sleeper compartment has only four beds, while a second-class sleeper has six, so the average space per person is naturally larger in the first-class sleeper. Since there is no middle berth in first-class, people on both the upper and lower berths can sit up straight, whereas in second-class sleepers, only those on the lower berth can do so. 2. In terms of privacy: First-class sleeper compartments have doors, allowing occupants to close them at any time, preventing passersby in the corridor from seeing inside, making it more secure. Second-class sleeper compartments do not have doors, so passersby can see everything inside. 3. In terms of facilities: Ordinary first-class sleepers have four people per compartment, while deluxe first-class sleepers have two people per compartment, but not all trains have deluxe first-class sleepers. Deluxe first-class sleeper compartments come with a washroom, sofa, LCD TV, call phone, and other amenities. In 25K and 25T first-class sleeper cars, there are TVs, and disposable slippers and toiletries are provided.

11

1

Share

What is the yellow dashed line in the middle of the road?

The yellow dashed line in the middle of the road is an indication marking. Here is more relevant information: 1. Road traffic markings: Road traffic markings are safety facilities composed of various lines, arrows, text, vertical markings, raised pavement markers, and delineators painted on the road surface. Their function is to regulate and guide traffic. They can be used in conjunction with signs or independently. For example, making a U-turn in a no-U-turn section or turning left where left turns are prohibited are both violations of prohibitive markings. 2. Penalty provisions: 1) Deduct 2 points: Driving a motor vehicle on highways or urban expressways without wearing a seatbelt; not entering the guiding lane in the direction of travel when passing through signal-controlled intersections; passenger vehicles exceeding the approved number of passengers by less than 20%; overtaking or occupying the opposite lane when encountering queued or slow-moving vehicles ahead; weaving through waiting vehicles; making or answering phone calls while driving. 2) Deduct 3 points: Driving a motor vehicle through a crosswalk without slowing down, stopping, or yielding to pedestrians; overtaking on highway ramps; not driving according to prohibitive markings; turning vehicles not yielding to straight-going vehicles or pedestrians; right-turning vehicles from the opposite direction not yielding to straight-going vehicles or pedestrians.

1

0

Share

What to do if the Buick Excelle XT 16T has high fuel consumption?

High fuel consumption can be addressed by adopting fuel-saving measures. The following are methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance leads to increased fan speed and lower temperature settings to achieve a cooling effect. 2. Frequent sudden braking: Frequent sudden braking is a primary reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement vehicles: For vehicles exposed to the sun, avoid turning on the air conditioning immediately after entering. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.

18

5

Share

What brand were the first 30 domestically produced cars in 1957?

In July 1956, the first batch of domestically produced cars were Jiefang brand trucks, primarily used for military cargo transport. Here's more relevant information: Jiefang brand trucks: The Jiefang brand trucks were successfully manufactured in 1956 at the Changchun First Automobile Works. The emergence of Jiefang brand trucks marked the end of China's inability to produce automobiles. The first model of Jiefang brand truck was called CA10, which was based on Soviet truck designs. The vehicle weighed 3,900 kilograms, equipped with a 90-horsepower, 4-stroke 6-cylinder engine, with a load capacity of 4 tons and a maximum speed of 65 km/h, making it suitable for China's road conditions at that time. Jiefang trucks featured robust structures and long service life, which is why the original model remained in production for 30 years. The evolution of FAW (First Automobile Works) serves as a microcosm of China's automotive industry development. After decades of progress, Chinese automobiles have entered international markets in large quantities.

9

4

Share

Can I Add Tap Water to the Chery Tiggo 3's Radiator?

What is the left-to-right order of brake, clutch, and accelerator?

What are the reasons why a motorcycle has electricity but the start button does not respond?

What is the difference between first-class and second-class sleepers on the D703?

What is the yellow dashed line in the middle of the road?

What to do if the Buick Excelle XT 16T has high fuel consumption?

What brand were the first 30 domestically produced cars in 1957?

What is the level of the Audi S7?

How Often Should BMW Brake Pads Be Replaced?

What does the p06da00 code mean?

Why does BYD charging always automatically disconnect?