Can Hangzhou Blue License Plates Be Used on New Energy Vehicles?

What to Pay Attention to When Getting Car Repaired at 4S Shop Through Insurance

Here are the precautions to take when getting your car repaired at a 4S shop through insurance: Ownership of replaced parts under insurance repair: Some car owners may want to keep the damaged parts to sell or collect them. Regardless of the motive, the replaced parts cannot be kept by the car owner because insurance companies require the recovery of all replaced parts. If any part is missing, the insurance company may not compensate for that part, leaving the 4S shop to cover the cost. Check if the interior is dirty: During repairs at the 4S shop, many people may handle the car, potentially leaving dirty handprints on the interior. Therefore, carefully inspect the interior condition. If you find any dirty spots, you can ask the 4S shop to clean them. Check for unauthorized mileage: After the car is towed to the 4S shop, the current mileage will be recorded on the repair order. When signing the repair order upon picking up the car, verify that the odometer mileage matches the one written on the repair order without significant discrepancies.

4

2

Share

Can a Scrapped Engine Be Replaced?

Yes, but it must be replaced with the same model of engine. The 4S shop must issue a certificate, and then the engine number must be changed at the vehicle management office. Below are the relevant details: Check the engine: When the engine is running, frequently monitor the readings of the oil pressure gauge and coolant temperature gauge. If the oil pressure and water temperature values differ significantly from normal, immediately stop the engine for inspection. If the engine overheats while driving, you can reduce power output by releasing the accelerator pedal, shifting the transmission to a lower gear, or performing both operations simultaneously until the engine temperature returns to the normal operating range. Precautions: After the engine operates at full load, it must idle for 3 to 5 minutes before shutting down. This allows the pistons, cylinders, bearings, and turbocharger components to cool down sufficiently.

7

3

Share

What is the speed limit on Weiqing Expressway?

For example, the speed limit on Weiqing Expressway from 0 km to 70 km is 120 km/h, and from 70 km to 93.5 km it is 100 km/h. Therefore, when driving on the expressway, it is essential to pay close attention to the various signs and markings set up along the road, especially for those unfamiliar with the route. Developing the habit of constantly observing signs and markings is crucial. Below are some important points to note when driving on the expressway: Strictly adhere to the speed limits: This includes both the maximum and minimum speeds. Do not exceed the maximum speed or drive below the minimum speed, as both can easily lead to safety hazards. On a two-lane expressway, use the left lane, and on expressways with three or more lanes, use the middle lane. The right lane often has many large trucks, so it's best to stay away from it. Check your vehicle's condition before entering the expressway: Pay special attention to the fuel tank, tires, brakes, and water. If the tires are severely damaged, replace them first. If there are issues with the brakes, repair them promptly. Due to the high speeds on the expressway, the windshield can quickly become covered with insect remains, making windshield fluid very useful.

8

3

Share

Will the car roll away if only in P gear without engaging the handbrake?

If the terrain is relatively flat, it is acceptable to engage the P gear without pulling the handbrake. However, on uneven terrain such as slopes, it is not advisable to engage the P gear without pulling the handbrake. The locking mechanism inside the transmission has a force limit, and exceeding this limit may cause damage to the transmission. Therefore, when parking on a slope, it is essential to firmly engage the handbrake. Relying solely on the P gear locking mechanism to keep the vehicle stationary will increase the stress on the locking mechanism. Below are some relevant details: When parking normally: It is acceptable to either engage the P gear first or pull the handbrake first. On uneven terrain, either method is acceptable, but it is best to first firmly engage the handbrake and then shift into P gear to protect the transmission. When waiting at a red light: Do not engage the P gear. If the P gear is engaged and the vehicle is rear-ended by another car, the transmission of your vehicle may be damaged.

6

4

Share

What are the effects of running out of motorcycle brake fluid?

It needs to be replenished in time, otherwise it will affect the braking performance, causing the brakes to not return to position and affecting the use of the vehicle. Below is relevant information: Brake fluid: Brake fluid is used by the hydraulic brake booster oil pump as a transmission medium. The brake pedal pushes the piston of the master cylinder, which then applies force to the brake fluid. Since the oil pipes can be arranged freely, it facilitates the layout of the braking system. The pressure of the brake fluid then acts on the wheel cylinders, ultimately pushing the braking components to generate braking force. Hydraulic clutches operate on the same principle. Brake fluid: Brake fluid itself is a very stable pressure oil, resistant to chemicals and high temperatures, but it has one peculiarity—it absorbs moisture from the air. The most troublesome aspect is that the hydraulic brake system must be connected to the external atmosphere to function properly, so the oil reservoir cap has a vent.

1

4

Share

What happens if you floor the accelerator in first gear?

Flooring the accelerator in first gear can cause certain damage to the car. Deeply pressing the accelerator in first gear has certain impacts on the car's tires and engine. For driving safety, it's best not to do this. Some car owners, in order to save time during vehicle startup and to accelerate faster, prefer to press the accelerator deeply when starting the car. In fact, this practice is incorrect. Deeply pressing the accelerator during startup can cause certain damage to the car's engine and transmission. Long-term use of this method for starting will significantly reduce the service life of the engine and transmission, and at the same time, the car's fuel consumption will also increase. The correct techniques for starting a car are as follows: Powering on the car: After powering on, start the car. Many car owners, when driving, insert the key and immediately start the ignition. In fact, this practice is very wrong. When starting the vehicle, you should first power on the car, allowing it to perform a self-check. After the self-check is completed, then start the ignition. Starting the car directly can cause damage to the vehicle's battery and engine. Manual transmission cars: For manual transmission cars, when starting in first gear, you can slightly press the accelerator. Avoid pressing the accelerator deeply to raise the RPM too high, as this can cause long-term damage to the engine and transmission.

8

2

Share

Can Hangzhou Blue License Plates Be Used on New Energy Vehicles?

What to Pay Attention to When Getting Car Repaired at 4S Shop Through Insurance

Can a Scrapped Engine Be Replaced?

What is the speed limit on Weiqing Expressway?

Will the car roll away if only in P gear without engaging the handbrake?

What are the effects of running out of motorcycle brake fluid?

What happens if you floor the accelerator in first gear?

What model is the Mercedes-Benz Eagle Eye?

Which Mercedes-Benz model features a center gear shift?

What lights should be used when driving closely behind another vehicle in the same direction at night?

Can Shared Cars Be Driven Out of the City?