···
Log in / Register

Can Golden Fog Lights Pass the Annual Vehicle Inspection?

3 Answers
LeJeffrey
09/04/25 3:12am
Golden fog lights cannot pass the annual vehicle inspection. Modifying the color of fog lights may lead to inspection by traffic police. According to regulations, fog lights must be white. Changing them to other colors violates vehicle technical requirements and does not comply with traffic safety standards. Brightness Regulations: The annual inspection stipulates that the brightness of low beams must not be less than 1050 lumens, and high beams must not be less than 1450 lumens. If the brightness of the bulbs is too high, it may also result in failing the inspection. The angle of the light beam is strictly regulated by the state to prevent glare and avoid causing harm to other vehicles and pedestrians. Choose High-Quality Brand Bulbs: Additionally, professional installation is required, including proper adjustment. It is recommended to use lights with strong penetration and long bulb lifespan. Moreover, it is essential to select bulbs specifically designed for your vehicle model to avoid interference with the original wiring.
Was this review help?
20
4
Share
VanZane
09/16/25 4:22am
I've been driving for nearly twenty years, and whether golden fog lights can pass the annual inspection mainly depends on installation compliance. The annual inspection has strict requirements for lighting—fog lights must typically be yellow or pale yellow in color, and cannot be too bright or deviate from the standard color temperature. Golden-eye bulbs are mostly designed to improve visibility in fog, with a golden hue that usually doesn’t violate regulations. However, it’s important to ensure the brightness doesn’t exceed limits, and modifications must prevent flickering or glare. Otherwise, inspectors will test the light angle and intensity, and issues found may lead to failure. I recommend drivers regularly self-check, especially before rainy days, ensuring the lamp base is secure to avoid looseness. It’s best to have a professional shop adjust them to avoid last-minute fixes before the inspection. In short, golden fog lights are generally fine, but avoid reckless modifications to other parts—safety comes first.
Was this review help?
17
1
Share
Expand All
MacIker
10/30/25 4:56am
As a young person, I'm somewhat interested in car modifications, and changing fog lights to golden eyes is a common topic. Will it pass the annual inspection? Generally speaking, golden eye bulbs are yellow-toned, which meets the standard requirements for fog lights and is less likely to violate regulations. However, be careful during the installation process to avoid messy wiring, or the annual inspection might flag the connections as unstable or improper. The brightness also needs to be controlled properly—too dazzling or too dim won't do. A friend of mine modified his last year, but it didn't pass the inspection because the bulb brightness was uneven. I recommend paying attention to the fog lights' performance while driving and addressing any abnormalities immediately. Test them yourself before the inspection—turn them on to check if the light spots and colors are consistent. Safe driving relies on good lighting, so don't prioritize style over compliance.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

How soon can I reschedule after canceling an appointment at the DMV?

If the cancellation is not due to failing an exam, you can immediately reschedule after canceling the appointment. Additional information: Below is an introduction to the subject exam content: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test, computer-based with a full score of 100, passing requires 90 or above. 2. Subject 2: Field driving skills test, conducted with an actual vehicle. Results are only pass or fail. The test includes five mandatory items performed in sequence: reversing into a parking space, parallel parking, S-curve driving, 90-degree turn, and hill start and stop. 3. Subject 3: Road driving skills test, conducted on a road or simulated field. 4. Subject 4: Safe and civilized driving knowledge test, with a full score of 100, passing requires 90 or above.
19
0
Share

How to Start a Car with a Dead Battery?

Methods to start a car with a dead battery include: 1. Push-start method: This is a simple and effective emergency method, but it is recommended to avoid using it unless absolutely necessary, as it can cause some damage to the car's engine and clutch; 2. Jump-start method: This method can be used for both manual and automatic transmission vehicles; 3. External towing start. Reasons why a car battery frequently loses charge include: 1. Electrical leakage in the vehicle circuit; 2. Battery failure leading to weakened storage capacity; 3. Short driving distances with too many engine starts; 4. Unswitched electrical appliances after the vehicle is parked.
6
2
Share

What Causes Severe Engine Vibration When Turning on the Car's Air Conditioning?

There are two main reasons for severe engine vibration when turning on the car's air conditioning. Below is a detailed explanation of these two causes: 1. Spark Plug Carbon Buildup: After a period of use, carbon deposits can accumulate on the spark plugs. If not cleaned in time, this will reduce the engine's torque output, leading to vibration when the air conditioning is turned on. 2. Throttle Body Carbon Buildup: When the air conditioning is turned on, the engine load suddenly increases, and the throttle valve opens wider. At this point, the issue of dirt buildup is magnified. If the throttle valve is stuck or fails to open to the proper position, it restricts the air intake, thereby reducing the engine's power and ultimately causing engine vibration.
7
1
Share

What to do if the Mazda CX-4 reversing camera does not display?

There are different solutions for a car reversing camera not displaying, depending on the cause: 1. Camera malfunction: You can purchase and install a new one. It's best to buy one with an illumination power supply so you can see at night. 2. Loose power cable causing camera power failure: Simply plug the power cable in more tightly and check for any water marks on the plug, as power issues are often caused by short circuits due to water marks. 3. Broken wiring: Use sealant to secure and firmly fix it to avoid being pinched off while driving. 4. Display screen damage: Carefully observe the power supply to the display screen, check for any cracks or loose surrounding wires. If it cannot be repaired, purchase and install a new one.
14
1
Share

What procedures are required for the sixth-year vehicle inspection?

The procedures required for the sixth-year vehicle inspection are as follows: 1. Power of Attorney: A motor vehicle inspection entrustment notice issued by the vehicle management office of the registration location; if the vehicle owner or unit entrusts someone else to handle the inspection, a power of attorney must be issued, and the entrusted person should present their resident ID card. 2. Copies: Original and photocopy of the vehicle license; original and photocopy of the organization code certificate of the vehicle-owning unit with an official seal. 3. Other materials: Regular motor vehicle inspection form; rubbing of the chassis number, vehicle photos, road toll receipt; inspection report, compulsory traffic insurance contract for the vehicle awaiting annual inspection. 4. Materials required for vehicle annual inspection (for units): Original vehicle license, duplicate of compulsory traffic insurance, organization code certificate of the People's Republic of China (with fresh seal), power of attorney (with fresh seal), photocopy of the agent's ID card, and the vehicle.
4
4
Share

What brand is leoparrd?

leoparrd refers to Leopaard Auto, which is the abbreviation of Hunan Leopaard Automobile Co., Ltd. It is a comprehensive automobile manufacturer engaged in the research and development, production, sales, and service of complete vehicles and components. Affiliated with Changfeng Group, the company is headquartered in Changsha, Hunan, and operates three major vehicle manufacturing bases in Yongzhou (Hunan), Jingmen (Hubei), and Chuzhou (Anhui). The Leopaard CS10 is a compact SUV under the Leopaard Auto brand, with dimensions of 4663mm in length, 1875mm in width, and 1700mm in height, and a wheelbase of 2700mm. In terms of suspension, the Leopaard CS10 features a MacPherson strut front suspension and a multi-link rear suspension.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.