Can fuel additives be added after the tank is full?

What are the reasons for car shaking during startup?

There are several reasons for car shaking during startup: 1. A dirty throttle can cause idle shaking. 2. Faulty spark plugs can lead to rapid vehicle shaking. 3. If one cylinder of the engine is not working, it can also cause idle shaking. Additionally, the vehicle may shake during low-speed acceleration. 4. Aging rubber components inside the engine mounts and transmission mounts can result in car idle shaking. The soft rubber connection between the engine and the frame may be damaged. The natural lifespan of rubber is 5 years, and the design lifespan of engine mounts is 80,000 to 100,000 kilometers. Therefore, whether it's pure rubber or hydraulic mounts, issues of rubber aging or damage may arise, requiring inspection and replacement.

6

0

Share

What Causes the Engine Fault Light to Illuminate?

The engine fault light can illuminate for numerous reasons, with the following being the most common: 1. Oxygen sensor connector damage or looseness, leading to a mixture that is too lean or too rich. 2. Poor quality or substandard gasoline, resulting in incomplete combustion of the air-fuel mixture during engine operation. 3. Poor engine maintenance, where issues with spark plugs, ignition coils, fuel pumps, or fuel line blockages cause improper combustion of the engine's air-fuel mixture. 4. The engine requires air for combustion; a dirty car air filter or lack of regular cleaning can affect the air intake, leading to long-term blockages and potentially causing the engine fault light to illuminate.

19

1

Share

Where is the Buick Encore engine number located?

The engine number of the Buick Encore is located at the connection point between the engine and the transmission. After opening the engine hood, you need to look carefully to find it. It is generally a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked in the following four ways: The vehicle's driving license has the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will indicate the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will indicate the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, and each engine can only have one engine number, with each engine's number being unique.

16

1

Share

How to turn off the rear wiper of the Tiguan?

The rear wiper of the Tiguan cannot be turned off, which may be due to improper operation. The correct method to turn it off is to push the control lever forward once, and the rear wiper will be turned off. The lever on the right side of the Tiguan's steering wheel can be moved up and down to control the front wipers, and moved forward and backward to control the rear wiper. More information about the Tiguan's wipers is as follows: 1. The rear wiper is the wiper on the rear windshield of the car. Rear wipers are mostly equipped on SUVs, MPVs, hatchbacks, and some liftback cars. Moving the wiper lever forward or backward can activate the rear wiper, and it can also control the automatic swinging of the rear wiper and the spraying of the rear wiper. 2. The rear glass of a sedan has a relatively large inclination, while that of a hatchback has a relatively small inclination. The front wipers are hidden behind the engine hood, so when high-speed airflow passes over the front of the car, it is blocked by the engine hood and does not affect the wipers. However, the rear wiper has no place to hide, so the impact of high-speed airflow must be considered before installation. Due to the inclined rear window of a sedan, the wind speed during driving is very fast, which not only hinders the car's movement but also severely affects the wiper's performance. In contrast, the rear window of a hatchback is almost vertically installed, so the wind speed is slow and the impact is minimal, making it suitable for installation.

14

1

Share

What is the normal fuel pressure value for an Audi A6?

Audi A6's normal gasoline pressure generally ranges between 300kpa to 350kpa. Depending on the model, the gasoline pressure may vary. Typically, as long as it's around 300kpa, which is 0.3MPa, it is considered normal. More information about gasoline pressure is as follows: 1. When the engine oil pressure is too high, it disrupts normal lubrication conditions. The most common causes include: excessive oil viscosity, oil deterioration and gumming, clogged filter and oil passages, improperly adjusted or stuck pressure relief valve can all lead to excessive oil pressure. 2. When the engine oil pressure is too low, it will result in inadequate lubrication, cooling and cleaning, leading to adhesive wear of parts. There are many reasons for low oil pressure, such as low oil viscosity, ruptured filter, excessive clearance between crankshaft main journal and connecting rod bearing, etc., all of which can cause low oil pressure.

19

1

Share

Can the Engine Still Run After Cylinder Scuffing?

If a car experiences cylinder scuffing, it should not be driven. Cylinder scuffing can cause a rapid rise in water temperature and severe water shortage in the radiator. The vehicle should be stopped immediately and sent to a repair shop for inspection and maintenance. Continuing to drive can lead to cylinder seizure and, in severe cases, engine damage or even total failure. Below is more information about cylinder scuffing in cars: 1. Cylinder scuffing is a common car malfunction. A blown head gasket can produce various forms of abnormal noises, and the sound may vary depending on the extent of the gasket damage. 2. The primary cause of cylinder scuffing is a severe lack of lubrication oil, leading to poor lubrication. This results in intense friction between the cylinder liner and piston, as well as the connecting rod, causing temperatures to rise. However, inadequate heat dissipation fails to provide cooling, reducing the lubrication gap. This can cause the piston, cylinder liner, and connecting rod to seize together. Due to the strong inertial force continuing to operate, it can easily lead to cylinder seizure, causing severe impact damage to the engine block.

19

1

Share

Can fuel additives be added after the tank is full?

What are the reasons for car shaking during startup?

What Causes the Engine Fault Light to Illuminate?

Where is the Buick Encore engine number located?

How to turn off the rear wiper of the Tiguan?

What is the normal fuel pressure value for an Audi A6?

Can the Engine Still Run After Cylinder Scuffing?

What is the actual range of the AION Y?

Can a car with a rusty chassis still be driven for 15 years?

What Does Basic Vehicle Insurance Cover?

What causes the buzzing sound when the Audi A4's air conditioning is turned on?