Can Fuel Additives Be Added After Refueling?

1 Answers
LeKennedy
07/29/25 3:40pm
Fuel additives can be added after refueling, but the mixture may not be uniform enough in this case. It is recommended to add the fuel additive before refueling at the gas station. Follow the recommended ratio by adding the fuel additive to the car's fuel tank first, then refuel. This way, the added fuel additive will quickly dissolve thoroughly under the impact and vortex stirring of the fuel, ensuring a more uniform mixture. Gasoline-type fuel additives should be added to the gasoline tank, while diesel-type fuel additives should be added to the diesel tank. The two should not be confused. For the first use, fuel additives can be added continuously three to five times, each time following the proportion specified in the instruction manual. After driving 3,000 to 5,000 kilometers, repeat the process by adding the additive continuously three to five times again. This cycle is considered appropriate.
Was this review help?
18
3
Share
More Forum Discussions

What is Active Suspension?

Active suspension refers to a suspension system where the stiffness and damping characteristics can dynamically adapt based on the vehicle's driving conditions, ensuring the suspension system always maintains optimal shock absorption. Active suspension can balance both ride comfort and handling stability, whereas in traditional passive suspension designs, these two factors are often difficult to reconcile, usually requiring a compromise. When the load changes or road conditions vary, active suspension can adjust its parameters to keep the vehicle's ground clearance at a reasonable level, thereby improving handling stability, ride comfort, and off-road capability.
16
0
Share

What to Do If Your Car Gets Scratched?

Methods to deal with car scratches: 1. If the scratch only affects the clear coat layer, it can be polished; 2. If the scratch damages the color coat layer, a repaint is needed for repair; 3. If the scratch causes metal deformation of the body panel, bodywork repair is required, followed by repainting. Generally, bumpers, side mirrors, and some wheel arch parts are made of engineering plastic, which won't rust. Whether to repaint these areas depends on the owner's preference. However, if such severe scratches appear on other parts of the car body, repainting is necessary. Otherwise, even a small damage can lead to rusting of the steel plate.
10
5
Share

What brand of car is smort?

There is no car brand called smort. It should be the smart car, which is a product of the collaboration between German Mercedes-Benz and Swiss watch giant Swatch. In the name, 's' stands for Swatch, 'm' stands for Mercedes-Benz, and 'art' means art, symbolizing the artistic nature of their cooperation. The dimensions of the smart car are 2695 mm in length, 1663 mm in width, and 1555 mm in height, with a wheelbase of 1873 mm. The smart car features a rear-engine, rear-wheel-drive layout, with a front suspension type of MacPherson strut independent suspension and a rear suspension type of torsion beam non-independent suspension. The body structure is of a unibody design.
5
0
Share

Why Does the Engine Suddenly Stall?

Reasons for sudden engine stalling: 1. Electrical circuit issues; 2. Spark plug problems: Spark plugs are wear parts that require regular replacement. If used for too long, the electrode gap will widen, affecting ignition energy. Weak ignition energy prevents the combustible mixture in the engine from burning completely; 3. Ignition coil issues; 4. Air intake problems; 5. Fuel injection problems: If the fuel injection system malfunctions, the engine's fuel supply becomes abnormal, and the car's engine cannot operate properly. When the car's engine fails, it should be taken to a professional facility to read the fault codes, which can help technicians quickly identify the cause and location of the issue.
19
0
Share

How to Turn on the Warm Air in the Tayron?

The method to turn on the warm air in the Tayron: First, turn on the air conditioning, then increase the temperature, and finally turn off the AC. The Tayron adopts Volkswagen's family-style design language, featuring a more fashionable polygonal front grille with exquisitely shaped chrome decorations embedded in the middle, integrating the headlight clusters on both sides with the front grille. The Tayron is a mid-size SUV under FAW-Volkswagen, with body dimensions of 4589mm in length, 1860mm in width, and 1660mm in height, a wheelbase of 2731mm, a body type of 5-door 5-seat SUV, and a 7-speed dual-clutch transmission system.
7
0
Share

What is the method to reset the maintenance light on the Damai X7?

The method to reset the maintenance light on the Damai X7: First, turn off the ignition key and wait until all the lights on the dashboard go out. There is a long button on the dashboard; press and hold this button without releasing it, then power on the car (do not start the engine). After a few seconds, the maintenance light will automatically turn off. The Damai X7 has body dimensions of 4736 mm in length, 1942 mm in width, and 1672 mm in height, with a wheelbase of 2850 mm. The Damai X7 features front-wheel drive, with a front suspension type of MacPherson strut independent suspension and a rear suspension type of multi-link independent suspension. The body structure is of a unibody design.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.