Can front and rear fog lights be turned on together?

1 Answers
LeJourney
07/29/25 7:23pm
Front fog lights and rear fog lights can be turned on simultaneously. On the vehicle's lighting combination switch, there are distinct symbols for front and rear fog lights. The front fog light symbol features three downward-slanting lines on the left side of the bulb icon, while the rear fog light symbol shows three horizontal lines on the right side of the bulb. When driving in rainy or foggy conditions, it is essential to activate both front and rear fog lights to alert other vehicles and prevent potential safety hazards. Procedure for turning on both fog lights: Start the vehicle's power supply; Rotate the knob on the left panel of the steering wheel to the low beam position; Pull the knob outward one notch to activate front fog lights; Pull the knob outward two notches to simultaneously activate both front and rear fog lights. Light sources of fog lights: Generally, front fog lights use halogen or LED bulbs with yellow light, mounted near the ground on the front bumper. The beam angle must be properly adjusted - neither too low nor too high, as improper angles may obstruct the vision of oncoming drivers. Rear fog lights typically use red halogen bulbs. Installation positions vary by model, with some mounted near the ground on the rear bumper and others integrated into the rear taillight assembly. Important note: Fog lights should not be used as regular daytime running lights. Due to their high penetrating power, fog lights should only be used when necessary, as they can significantly impair other drivers' visibility when used inappropriately.
Was this review help?
7
2
Share
More Forum Discussions

What brand is Jaguar's 9AT transmission?

Jaguar's 9AT transmission is from the ZF brand. ZF: ZF Friedrichshafen AG, headquartered in Friedrichshafen, Germany, is a Fortune Global 500 company and a global partner and component supplier in the automotive industry, specializing in providing automotive components such as transmission, steering, and chassis systems. ZF Group holds a world-leading position in automotive powertrain systems and chassis technology. Jaguar: Jaguar, a renowned British luxury car brand, was founded in 1922 by Sir William Lyons. It is currently owned by India's Tata Group. In the Chinese market, Jaguar offers three major product lines: the X-series luxury sports sedans, TYPE-series luxury sports cars, and PACE-series luxury coupe SUVs.
13
5
Share

Where is the wiper of Audi car?

Audi's wipers are located below the front and rear windshields, and the wiper switch is generally set on the lever on the right rear side of the steering wheel. Introduction to wipers: The wiper is an important accessory installed on the windshield, and its function is to remove rain, snow, and dust that obstruct the view on the windshield. Therefore, it plays a crucial role in driving safety. Basic structure: The electric windshield wiper is driven by a motor and generally consists of a wiper arm, wiper blade assembly, rubber blade, blade holder, blade supporter, wiper arm spindle, wiper base plate, motor, reduction mechanism, drive rod system, drive rod hinge, wiper switch, and wiper switch knob.
17
3
Share

What is the fault code U1017 for Volkswagen?

Volkswagen fault code U1017 represents a communication failure. Check the communication network and clear the code with a decoder at a repair shop or 4S store. Possible causes: The oil cup interior is too dirty, the filter screen is clogged, or the oil level in the cup is low. There is a large amount of air in the power steering system. Foreign objects in the steering system cause the steering pump flow control valve to stick. Insufficient tire pressure, interference or loose connection in the steering column, loose or slipping pump belt, or loose pump installation. Fault diagnosis and elimination: Inspect the steering gear, steering pump control valve, oil cup filter screen, and steering oil, and clean the entire power steering system. If the pump is dirty, be sure to clean the inside and outside of the power steering pump and oil pipes (do not use cotton gauze or other fibrous cloth; use a clean brush for cleaning), and bleed the steering system as specified.
4
0
Share

How to Use the Electronic Parking Brake on the Honda Vezel?

To use the electronic parking brake on the Honda Vezel, simply lift or press the toggle switch. The Honda Vezel is a compact SUV. Taking the 2020 Honda Vezel as an example, its body dimensions are: length 4328 mm, width 1772 mm, height 1605 mm, with a wheelbase of 2610 mm. The 2020 Honda Vezel is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96kW and a maximum torque of 155Nm, paired with a 6-speed manual transmission. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam rear suspension.
11
0
Share

What is the tire size of the Audi Q5?

The tire size of the Audi Q5 is 235/55R19. Tires are one of the components of a car, directly in contact with the road surface, working together with the car's suspension to cushion the impact during driving. The Audi Q5 is a mid-size SUV under FAW-Volkswagen Audi, with body dimensions of 4753 mm in length, 1893 mm in width, and 1659 mm in height, and a wheelbase of 2908 mm. The Audi Q5 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 140 kW and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. It features a front-engine, four-wheel-drive layout, with both front and rear suspensions using a five-link independent suspension system.
18
2
Share

Do You Need to Wash the Car Before Applying Window Tint?

It is necessary to wash the car before applying window tint. If the car body is not clean, bumps may appear after tinting, affecting the car's appearance, and the raised areas are also prone to damage. The functions of car window tint include: 1. Providing heat insulation in summer, saving air conditioning energy; 2. Reducing energy loss in winter, maintaining the interior temperature; 3. Blocking ultraviolet rays, extending the lifespan and quality of interior furnishings; 4. Reducing glare, ensuring safe and comfortable driving. The steps for applying car window tint are: 1. Lay large bath towels on the front hood and dashboard; 2. Cover the seats with seat covers and wrap them tightly with plastic wrap; 3. Thoroughly clean the car windows; 4. Spray a small amount of window tint installation liquid on the outer surface of the window glass; 5. Carefully position the soft template over the glass; 6. Cut the window tint according to the template; 7. Apply the window tint and use a squeegee to remove any bubbles between the tint and the glass.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.