Can fog lights only be turned on in foggy weather?

1 Answers
Nunes
07/30/25 3:25am
There is no clear regulation stating that fog lights can only be used in foggy weather. They can also be turned on when visibility is poor or during heavy rainfall, depending on the situation. Function of fog lights: Fog lights are designed to make your vehicle visible to others in foggy or rainy conditions, so they require high brightness and strong penetration. Ordinary LED daytime running lights or headlights cannot meet these requirements. Precautions for driving in fog: When visibility is less than 1 kilometer in foggy weather, you must turn on your headlights and rear fog lights. Turning on the headlights is not only for seeing the vehicle ahead but also to alert the vehicle in front. Otherwise, the leading vehicle may have difficulty noticing a following car when changing lanes in heavy fog, increasing the risk of a rear-end collision. Do not use high beams at night in foggy conditions. High beams are designed for wide-area illumination and can cause scattering in fog, creating a bright, white glare that reduces the driver's visibility of the road ahead.
Was this review help?
4
4
Share
More Forum Discussions

Can a Five-Seater Modified to a Four-Seater Pass the Annual Inspection?

A five-seater modified to a four-seater cannot pass the annual inspection. The reason is that it alters the vehicle's structure. Below is a detailed introduction about the annual vehicle inspection: 1. Overview: The annual vehicle inspection refers to the annual examination of vehicles that have obtained official license plates and registration certificates, conducted in accordance with the "Technical Conditions for Motor Vehicle Operation Safety." The purpose is to check the main technical conditions of the vehicle, encourage enhanced maintenance, ensure the vehicle is always in good condition, and guarantee driving safety. 2. Others: For passenger vehicles used for commercial purposes, the inspection is conducted once a year within the first 5 years. After 5 years, it is conducted every 6 months. For trucks and large or medium-sized non-commercial passenger vehicles, the inspection is conducted once a year within the first 10 years. After 10 years, it is conducted every 6 months. The annual inspection of motor vehicles is divided into the initial inspection and regular inspections.
2
4
Share

Will the car move if the handbrake is not pulled after turning off the engine?

After turning off the engine, the car may move if the handbrake is not pulled. It is essential to engage the handbrake after shutting down the engine. Proper use of the car's braking system is crucial during vehicle operation. Below is a detailed introduction to automobile brakes: 1. Brakes: Brakes, also known as the braking system, refer to the mechanism that stops or reduces the speed of moving locomotives, vehicles, other transportation tools, or machinery. The braking device is a mechanical system designed to slow down the vehicle's speed, also referred to as a decelerator. 2. Braking System: The braking system consists of the control system, hydraulic system, and power assist system. The control system includes components like the pedal and handbrake. The hydraulic system comprises hydraulic fluid, the brake pump, and hydraulic lines. The power assist system includes the vacuum booster pump. The electronic control system consists of the ABS pump, ABS sensors, and ABS computer. The execution system is made up of the brake caliper, brake pads, and brake disc.
3
4
Share

What are the reasons for the brake light staying on after the engine is turned off?

After the engine is turned off, the brake light staying on is related to a faulty brake switch or a short circuit in the wiring. The specific reasons are as follows: Faulty Brake Switch: Manually replace the brake switch. Short Circuit in Wiring: Lack of brake fluid: Brake fluid plays a crucial role in the vehicle's braking system. When the driver presses the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders located at each wheel, causing the brake pads to contact the wheels and stop the vehicle. Damaged tail light bulb: The brake fluid reservoir has upper and lower lines. If the brake fluid level falls below the lower line, the sensor next to the reservoir will detect this and reflect it through the brake light on the dashboard. If the brake fluid level drops rapidly, it indicates a leak in the braking system. Brake pads need replacement: Note that if the parking brake is not released while driving, the light will also stay on. Therefore, first check whether the parking brake is released.
18
1
Share

What are the effects of replacing only one tire?

If the replaced tire is not on the drive wheel, the impact is minimal. Ideally, both left and right tires should be replaced, but replacing just one is less economical. However, if the new tire is placed on the rear wheel, the effect is also minimal. Generally, a newly replaced tire should not be placed on the front wheel, as the front wheels are drive wheels. If the wear levels of the left and right tires differ, leading to varying grip levels, it may cause issues like pulling to one side or fishtailing. However, placing the new tire on the rear wheel has negligible effects. Below are some points to consider when replacing tires: 1. Same specifications: Tires of different specifications have varying outer diameters and section widths when inflated, leading to uneven load distribution if mounted on the same axle. 2. Same structure: Radial tires and bias-ply tires have different carcass structures, resulting in varying cushioning performance and circumferential deformation. Mixing these on the same axle will lead to uneven load-bearing and wear. 3. Same material: Material mainly refers to the carcass ply. For example, all-steel radial tires and fiber radial tires differ significantly in carcass thickness, ply strength, and heat dissipation performance, affecting performance if mixed. 4. Same tread pattern: Different tread patterns not only wear differently but also provide varying levels of traction. Inconsistent tread patterns on left and right tires can affect vehicle stability and may cause pulling or fishtailing during emergency braking.
11
1
Share

Why Does the Car Exhaust Pipe Make Abnormal Noises?

Car exhaust bellows, also known as car exhaust flexible pipes, are installed in the exhaust pipe between the engine exhaust manifold and the muffler. They provide flexible connections for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the lifespan of the exhaust muffler system. Below is an analysis of abnormal noises from the exhaust pipe: 1. Ignition timing too early or misfiring: Check the ignition timing. If the ignition timing is too early, it will advance the combustion pressure point, causing knocking. 2. Overly rich air-fuel mixture: An overly rich air-fuel mixture may result in incomplete combustion of the combustible mixture in the engine, which is then expelled with the exhaust gases. When this mixture encounters fresh air in the muffler, it reignites and produces explosive sounds. This phenomenon, known as backfiring in the muffler, manifests as heavy and unstable noises at low engine speeds but improves or even disappears at high speeds. 3. Excessive fuel level in the float chamber: A high fuel level in the float chamber not only leads to an overly rich air-fuel mixture but also allows some fuel to enter the cylinder without proper atomization. This unburned fuel is expelled with the exhaust gases and reignites in the muffler, causing backfiring. If large oil droplets are observed exiting the muffler or fuel continues to leak after the engine is shut off, it indicates an excessively high fuel level in the float chamber or a faulty float needle seal. In such cases, the carburetor should be cleaned or replaced.
3
4
Share

Which Gear Should Be Used for Reverse Parking?

Reverse parking is generally done in first gear. Press the clutch pedal all the way down with your left foot, and use your right foot to press the brake to bring the vehicle to a complete stop. Shift the gear lever from first gear to neutral, release the clutch, then press the clutch pedal all the way down again. Move the gear lever from neutral to reverse gear, release the brake with your right foot, and slowly lift the clutch to start reversing. Tips for the reverse parking test in Driving Test Subject 2: Learn to use the rearview mirrors: Beginners often struggle with judging distances through the rearview mirrors when they first start driving. This skill improves with practice. It's best to practice observing the mirrors while the car is stationary, checking the distance and alignment between the car body and the reference lines. With repeated practice, you'll develop a better sense of it. Learn to adjust the seat: After getting into the car, hold the steering wheel lightly with both hands. Your left foot should be able to press the clutch pedal all the way down comfortably without strain, and your hands should be able to turn the steering wheel easily. After adjusting, use your fist to measure the distance between your abdomen and the steering wheel—generally two fists for thinner people and one fist for heavier individuals. Remember this distance to ensure consistent seat adjustment every time you drive. Adjust the distance between the car body and the side line: Before entering the parking space, maintain a distance of 1.5 to 2 meters between the car body and the roadside line. If the distance is too small, turning the steering wheel fully when entering may cause the front of the car to cross the line. If the distance is too large, it may become difficult or even impossible to park properly.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.