Can Flood-Damaged Cars Be Driven?

What Causes Occasional Engine Shaking When Stopped at a Red Light?

The main reasons for occasional engine shaking when stopped at a red light are: This is a resonance phenomenon caused by the engine, frame, leaf springs, and tires. The solution is mainly to adjust the RPM slightly higher or lower. It occurs due to natural wear or deformation of bearings and ball joints. Many minor deformations are actually completely imperceptible to the naked eye, but as the vehicle speed increases and centrifugal force grows larger, the oscillating effect caused by bearing deformation becomes more pronounced; hence, the faster the speed, the greater the shaking. Here is some additional information: Function and Types: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, an internal combustion engine typically converts chemical energy into mechanical energy. Introduction and History: The term engine can refer to both the power-generating device and the entire machine including the power unit. The engine was first developed in England, so the concept of the engine also originates from English, with its original meaning referring to "a mechanical device that generates power."

4

1

Share

Does a higher actual wattage of a bulb make it brighter?

Bulbs with higher actual wattage are brighter. Here is some relevant information about power: Power and fuel consumption: There is no difference in engine hardware; different performance levels are achieved by adjusting ECU data, combined with variations in vehicle configurations to position the car differently. Turbocharged engines can control the turbocharger via the ECU to achieve different boost pressures, making it relatively easy to reduce power by lowering the boost pressure. Typically, such engines are designed for high power, and reducing the power does not compromise reliability. However, for purely low-power engines without optimization, fuel consumption is generally no different from high-power versions. Differences between high and low power: High and low-power versions also differ in valve timing structures. Low-power versions, for better fuel economy, are equipped with a dual-cycle system. Simply put, by adjusting the valve timing structure, some power is sacrificed at low RPMs to achieve better fuel efficiency, which high-power versions do not have. This may also affect many supporting systems, such as cooling system pipelines, cooling fans, engine motors, and turbos.

16

5

Share

How to Test the Quality of an Electronic Throttle Pedal?

Electronic throttle pedal is actually a sensor, which contains two ICs, called the main pedal sensor and the secondary pedal sensor. The reference voltage refers to the state voltage reference value provided by the original factory data. For example, before the pedal is pressed, the reference voltage of the main IC should be 800mV, and when fully pressed, it should be 4900mV. This is the reference voltage. If there is a fault, it will show that the throttle pedal data does not match the reference voltage, either too low or too high. Features of the throttle pedal: 1. Made of aluminum alloy, with an increased longitudinal contact area for the pedal, allowing the driver to control the throttle more freely and adding comfort to driving. 2. The bottom of the pedal has a function to adjust the pedal area, which can be adjusted according to personal habits. 3. Super cool exterior design, with sharp color contrast, high-quality texture, and never rusts. 4. Simple and convenient installation, no need to drill holes in the original pedal.

18

2

Share

Why is the front windshield film applied on the outside?

This is the preliminary work for applying film to the front windshield of motor vehicles. First, the film is temporarily affixed to the outside of the vehicle's windshield to cut it to size. After the trimming is completed, the pre-cut film is then applied to the inside of the windshield for normal use. Here is additional information: Whether vehicle film application requires registration procedures: When applying film to motor vehicles, no registration procedures are required. Applying film to vehicle windows falls within the normal scope of modifications and is not considered illegal alteration. Properly applied window film can effectively enhance vehicle privacy, improve the vehicle's aesthetic appearance, and provide heat insulation and UV protection. Precautions for applying window film: When selecting window film for vehicles, choose films with good transparency to ensure better nighttime driving visibility. Otherwise, it may affect the safety of nighttime driving. After application, strictly adhere to the recommended time before operating the vehicle windows. Opening the windows too soon may cause the film to bubble or peel at the edges.

5

1

Share

How to Judge the Distance Between Cars at Night?

Methods for judging the distance between cars at night are as follows: 1. Determine the vehicle's position (wheel position, front and rear position): (1) Judge the position of the roadside in the windshield (the left wheel is 10-15cm to the right of the left pillar of the windshield; the right wheel is 5-10cm to the left of the center line of the windshield); the distance from the roadside can be seen in the rearview mirror. (2) Determine the position of the right wheel (middle of the front of the car or the right wiper): on the ground relative to the right one-third of the front cover. 2. Judge the distance from the car in front: (1) When you see the upper edge of the front car's bumper from the lower edge of the windshield, it is about one meter; (2) When you see the lower edge of the front car's bumper (human knee) from the lower edge of the windshield, it is about two meters; (3) When you see the lower edge of the front car's rear tire (or the ground) from the lower edge of the windshield, it is about three meters; (4) The horizontal line relative to the ground seen from the lower edge of the left rearview mirror is the position of your own car's front.

5

2

Share

How to Turn on the Air Conditioner for Cold Air in an Automatic Transmission Car?

To turn on the cold air in an automatic transmission car, simply press the A/C button and adjust the temperature dial to the blue zone. Here are the relevant details: Button Introduction: AC is the air conditioning switch, MAX stands for maximum, and the internal circulation can be manually turned on or off. To get cold air, just lower the temperature setting. Conditions for Automatic Internal Circulation: By default, when the air conditioning is turned on and set to the maximum state (or when there is a significant temperature difference between the inside and outside of the car), the internal circulation will automatically activate. In other cases, it generally does not activate automatically. Alternating Between Internal and External Circulation: In external circulation mode, the air conditioner draws air from outside the car, while internal circulation reuses the air inside the car. Prolonged use of internal circulation can reduce air quality inside the car, potentially causing dizziness or discomfort. It is advisable to switch to external circulation for a few minutes after using internal circulation for a while, allowing fresh air to enter the car and improve air quality.

16

2

Share

Can Flood-Damaged Cars Be Driven?

What Causes Occasional Engine Shaking When Stopped at a Red Light?

Does a higher actual wattage of a bulb make it brighter?

How to Test the Quality of an Electronic Throttle Pedal?

Why is the front windshield film applied on the outside?

How to Judge the Distance Between Cars at Night?

How to Turn on the Air Conditioner for Cold Air in an Automatic Transmission Car?

What to Do If Your Vehicle License Is Lost?

Where is the rearview mirror folding switch for the Buick GL8?

How to Set the Lock Beep Sound for Tayron?

Which part of the tire experiences increased wear when the tire pressure is too high?