Can FAW-Volkswagen Double Protection be Refunded?

What Does It Mean When the Battery Light Comes On?

The following are the steps to address when the battery light comes on: 1. Check the battery terminals for oxidation; if present, clean them yourself. 2. Battery depletion - Measure the battery voltage with a multimeter when the engine is off. A reading above 12 volts indicates the battery is fine; otherwise, the battery may be damaged. 3. Charging issues, i.e., abnormal generator charging - Measure the battery voltage with a multimeter while the engine is running. A reading above 14 volts means the generator is functioning properly; below 14 volts indicates a problem with the generator. The reasons for the battery light coming on are as follows: 1. The generator's output voltage is lower than the battery voltage, the generator is not working, or there is a fault in the power supply circuit. The vehicle is running on battery power, and the generator and charging circuit should be inspected at a repair shop. 2. The battery light on the dashboard is a warning light indicating the generator is not charging. Normally, this light should turn on when the ignition is switched to the ON position and turn off after the engine starts. If the light remains on after starting, it means the generator is not charging, or there may be a wiring issue. Immediate inspection at a service station is required. If the generator is not charging, all electrical devices will rely solely on the battery's stored power. Without charging, the vehicle will eventually stall or fail to start once the battery is depleted. 3. The car can still operate normally when the battery light comes on because it can continue to use the stored power in the battery until it is exhausted. Once the battery is depleted, no part of the car will function. When the battery light is on, you can still drive the car to a garage, which will not damage any components. However, you must reach the garage before the battery is completely drained and the car stalls.

18

5

Share

What is the wheelbase of the imported Peugeot 206?

The wheelbase of the imported Peugeot 206 is 2442 millimeters, and the length, width, and height of this car are 3835 millimeters, 1673 millimeters, and 1373 millimeters respectively. Here is some related information about the imported Peugeot 206: 1. The entire lineup uses a 1.6-liter naturally aspirated engine, which has a maximum power of 80 kW, a maximum torque of 147 Nm, a maximum power speed of 5800 rpm, and a maximum torque speed of 4000 rpm. 2. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 4-speed automatic transmission (4AT). This type of transmission offers better reliability and durability. The front suspension of the imported Peugeot 206 uses a MacPherson independent suspension, while the rear suspension uses a trailing arm suspension.

4

3

Share

What is the reason for the discontinuation of the Leiling 1.2T?

The Leiling 1.2T has not been discontinued; it was only the 2018 model that was phased out before the launch of the all-new 2019 Leiling. More details about the Leiling are as follows: 1. The all-new Leiling is built on the GA-C platform under the TNGA architecture, featuring upgrades not only in appearance but also in interior design, chassis handling, safety, and intelligence. 2. The Toyota Leiling originates from North America, with a sharp and aggressive look that matches its name, along with outstanding quality. The North American version of this car has been a best-seller for many years, consistently ranking at the top of the A-segment sales charts. The Leiling inherits this championship DNA and is hailed as the most stylish compact sedan ever, leading in handling, fuel efficiency, space, safety, and quality. 3. The engine in the Leiling is currently the most advanced and best-tuned 1.2T small-displacement engine, delivering a maximum power of 85 kW and a peak torque of 185 N·m.

16

1

Share

How to Activate the One-Touch Up/Down Feature for the Tucson?

The method to activate the one-touch up/down feature for the Tucson is as follows: First, start the vehicle. In the second gear position, press the switch all the way down, then lift the button to raise the window all the way up, holding each position for 5 seconds without releasing. At this point, the one-touch up/down feature for the Tucson's windows will be activated. The specific descriptions for the one-touch window operation are as follows: 1. Short press: The window will automatically lower all the way. Short lift: The window will automatically rise all the way. 2. Long press: Release during the window's descent to stop the window from lowering further. 3. Long lift: Release during the window's ascent to stop the window from rising further. 4. Long press the remote unlock button to automatically lower all four windows. 5. Long press the lock button to automatically raise all windows.

13

5

Share

Where is the air conditioning filter of Dongfeng Fengxing Lingzhi located?

Dongfeng Fengxing Lingzhi's air conditioning filter is located behind the glove box on the passenger side. Carefully observe the back of the glove box to find the air conditioning filter. Here is some related information: 1. The air conditioning filter of Dongfeng Fengxing Lingzhi ensures that the filtered air enters the car interior as little as possible; it can filter solid impurities such as dust in the air; it can absorb harmful substances and moisture in the air. The role of the car air conditioning filter is very important, and car owners need to maintain and inspect the air conditioning filter in a timely manner. 2. If the air conditioning filter is not properly maintained, a large amount of dust and dirt will accumulate on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. Additionally, the car air conditioning's cooling and heating effects will decrease, and the service life of the air conditioning will also be reduced.

10

3

Share

How to adjust the time on Lavida's dashboard?

There are the following methods to adjust the time on Lavida's dashboard: 1. Turn on the ignition switch. 2. Press and hold the protruding button in the middle of the dashboard for 3 seconds. 3. When the hour starts blinking, press the corresponding button to adjust the hour to the actual time. 4. After setting the hour, wait for 2 seconds until the minute starts blinking, then adjust the minute to the actual value. 5. Once both hour and minute are set, it only takes 5 seconds to complete. Notes: 1. The time displayed on the car dashboard is only an auxiliary function and does not have high accuracy. 2. The adjusted time may gradually become faster or slower. As long as you master the adjustment method, you can readjust it whenever there is a deviation.

19

4

Share

Can FAW-Volkswagen Double Protection be Refunded?

What Does It Mean When the Battery Light Comes On?

What is the wheelbase of the imported Peugeot 206?

What is the reason for the discontinuation of the Leiling 1.2T?

How to Activate the One-Touch Up/Down Feature for the Tucson?

Where is the air conditioning filter of Dongfeng Fengxing Lingzhi located?

How to adjust the time on Lavida's dashboard?

What is the lifespan of Michelin tires?

How often should the transmission fluid in Lavida be changed?

What does the 'L' in cars mean?

Where is Renault Cars from?