Can expired license plate numbers be self-composed?

2 Answers
VonRhett
07/24/25 10:28pm
Expired license plate numbers cannot be self-composed. Unconfirmed numbers that have expired will be returned to the random number pool within 90-120 days of expiration. Here are the precautions for online license plate selection: 1. The pre-selection of license plate numbers includes two stages: 1. Basic information entry stage. 2. Pre-selection of license plate numbers stage. 2. Each vehicle can compose up to 20 license plate numbers and randomly select numbers 5 times in total. 3. The pre-selection of license plate numbers for new vehicle registration supports both self-composed selection and random selection methods. The pre-selection of license plate numbers for new energy vehicle license plate replacement only supports the random selection method.
Was this review help?
2
0
Share
AndersonDella
08/10/25 3:01pm
Last time my buddy was picking a license plate for his new car and ran into the same issue. Turns out, vehicles with overdue license status can't even access the plate selection system. The lady at the DMV put it bluntly: cars with unpaid fines or road maintenance fees are essentially blacklisted by the system, and you must clear all violations and annual inspections first. When I accompanied him to the bank to pay the fees, the staff suggested logging into the 12123 app three days in advance to check the penalty decision numbers. You can then handle it on-site by swiping your ID card for self-service processing. A special reminder: nowadays, the license plate pool for new energy vehicles is separate from that of fuel-powered cars. The self-selection number segments are updated on the 1st of each month. If a car is spotted with overdue fees still pending, the traffic police's handheld terminal will automatically trigger an alert when scanned.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

How to effectively remove 3M double-sided tape?

Here are the methods to remove 3M double-sided tape: 1. Alcohol wiping: Soak a soft cloth with sufficient 95% alcohol solution and gently wipe the adhesive area. The adhesive will soften and fall off easily. The advantage of using alcohol solution is that it causes no damage to plastic surfaces or car paint. 2. Gasoline wiping: Dip a soft cloth in a small amount of gasoline and gently wipe the adhesive area. Note that gasoline may "dissolve" certain plastics or paints, so use with caution to avoid unnecessary trouble. Be careful not to use too much gasoline and keep the wiping time as short as possible to prevent damage to plastic surfaces. 3. Hand cream wiping: Hand cream can also remove adhesive. It contains a large amount of solvent (usually over 70%) and some surfactants, which have good wetting, penetrating, and dissolving abilities. These can quickly penetrate between the adhesive and the surface, achieving the removal effect. 4. Hair dryer blowing: Use a hair dryer to soften the adhesive. When the adhesion of the double-sided tape weakens, it can be removed easily. Alternatively, cover the entire adhesive mark with a dry cloth soaked in vinegar. Once the adhesive is completely soaked, it can be easily scraped off with a ruler.
2
0
Share

Does the GAC Trumpchi GS4 have a dual-clutch transmission?

The Trumpchi GS4 uses an Aisin 6-speed automatic transmission. Below is an introduction to the transmission: Function of the Aisin 6-speed automatic transmission: The Aisin 6AT transmission adopts two sets of planetary gears. The expanded lock-up range design helps reduce fuel consumption during upshifts, while the advanced structure of the throttle valve improves fuel combustion efficiency, whether at idle or during acceleration. Additionally, a long-stroke damper is incorporated into the torque converter to effectively suppress vibrations. Transmission maintenance tips: Regularly inspect and replace the transmission fluid, typically every 40,000–60,000 kilometers. Do not start the engine in any gear other than N (Neutral) or P (Park), and avoid shifting into R (Reverse) while driving. Use genuine transmission fluid, as poor-quality fluid can reduce cooling and lubrication effectiveness, potentially leading to premature transmission failure. Use the appropriate gear: low gear for climbing hills and avoid using D (Drive) for long descents.
15
1
Share

Why Did Audi Abandon Torsen?

Here are the reasons why Audi abandoned Torsen: 1. Compromise on patent barriers: The patent for Torsen is held by a steering system manufacturer called JTEKT. 2. Compromise on emission regulations: Torsen, including the crown gear differential, is indeed not fuel-efficient, mainly due to transmission efficiency and weight. 3. Confidence in its own technology: With significant advancements in sensor technology and electronic control technology, Audi dared to make bold attempts.
7
2
Share

Are Fuel Savers Useful for Cars?

Fuel savers are useful. The fuel-saving effect of fuel savers can easily achieve an average range of 5-10%. Installed in vehicles, fuel savers are devices designed to save or reduce fuel consumption through certain methods or approaches. Related introductions are as follows: 1. Hydrodynamic Fuel Saver: The hydrodynamic fuel saver breaks through the traditional fuel-saving concept by focusing on improving combustion efficiency while also introducing a new clean, environmentally friendly, and high-performance fuel—hydrogen—to the engine. This innovation overcomes the limitations of traditional fuel savers, achieving a fuel-saving rate of 10%-30%. This not only surpasses the upper limit of traditional fuel savers but also challenges conventional thinking and perceptions to some extent. 2. Principle of Fuel Savers: The principle of automotive fuel savers involves utilizing the vehicle's own generator power to automatically generate the required current for the hydrodynamic fuel saver host through a power controller. The water in the hydrodynamic fuel saver host is electrolyzed into hydrogen and oxygen, which are then transported to the engine's cylinders via a safe isolation water supply device and pipelines. The hydrogen-oxygen mixture burns alongside other fuels to achieve the goal of fuel saving.
8
2
Share

What are the types of diesel-powered sedans?

Diesel-powered sedans include models such as the Audi Q7, Touareg, Land Rover, Jetta Diesel Edition, Bora Diesel Edition, and Audi A6L. Taking the Audi Q7 as an example, here are the specific details about the Audi Q7: 1. Vehicle Positioning: The Audi Q7 is a mid-to-large-sized SUV. 2. Four-Wheel Steering System: The Audi Q7 is equipped with a four-wheel steering system. At low speeds, the rear wheels turn in the opposite direction during steering, reducing the turning radius and the width of the driving trajectory. At high speeds, the rear wheels turn in the same direction, improving wheel response speed, dynamic performance, and stability. Additionally, the four-wheel steering system effectively assists the intelligent parking system and trailer assist system. 3. Powertrain: The Audi Q7 is powered by a 3.0TFSI engine, with a maximum power output of 245 kilowatts and a top speed of 247 kilometers per hour.
14
0
Share

How to Quickly Solve Car Oil Leakage?

Here are the methods to quickly solve car oil leakage: 1. Generally, if there is oil leakage from the car fuel tank, simply wiping it clean will suffice. 2. In case of minor cracks in the fuel tank, wipe the dripping oil port and apply a thin layer of chewed gum (once it becomes elastic). 3. After drying, it can tightly seal the crack. Here are the reasons for car oil leakage: 1. Oil leakage caused by insufficient tightness during the running-in period or excessive lubrication oil. 2. Overfilling the fuel tank; excessive refueling can lead to oil seepage from the fuel cap during driving. 3. With the increase in car age, loosening and falling off of various nuts on the car can also cause oil leakage. 4. Oil leakage caused by unqualified replacement parts during car part replacement.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.