Can experienced students skip the training hours?

Why does the car body shake violently when the AC is turned on?

The reason for the violent shaking of the car body when the AC is turned on is the increased load on the engine. The following are specific explanations: 1. The power output of each cylinder of the engine is uneven, and the variation between cycles of the same cylinder is relatively large: The lower the engine speed, the greater the variation. When the AC button is pressed, the vehicle's speed will increase. Observe whether the increase in speed is the same as before. If not, the throttle body needs to be checked. 2. If the increase in engine speed is consistent, the spark plugs and fuel injectors need to be inspected: Irregular variations in spark energy and fuel injection quantity cause variations between different cylinders and cycles of the same cylinder. It is necessary to check the burning condition of the spark plugs, whether the gaps are consistent, and the consistency of fuel injector flow, especially the consistency at low flow rates.

8

2

Share

How Often Should Motul 7100 Engine Oil Be Changed?

Replace the engine oil thoroughly approximately every 5,500 kilometers driven, and clean the oil filter every 90 million kilometers driven. Only by regularly changing the engine oil and cleaning the filter can you avoid component wear and oil passage blockage. Motul 7100 is suitable for the latest high-power output engines, direct injection engines, and catalytic converters. It has high-efficiency lubrication capabilities, reducing internal engine friction. Notes on engine oil change: Match with the engine: Choose engine oil based on the engine's requirements. Do not use high-grade oil in lower-grade engines, nor low-grade oil in high-grade engines. Select oil that matches the engine. Advantages: Multi-grade oil should be chosen. Multi-grade oil has advantages such as economy, long service life, and high efficiency, providing better protection for the engine.

13

2

Share

Why does a motorcycle jerk at low speeds but run normally at high speeds?

Possible causes include a clogged carburetor or improper air-fuel mixture adjustment. Here are explanations for potential engine issues: Engine misfire: This refers to one cylinder in a multi-cylinder engine ceasing operation, which can cause abnormal vibrations and poor acceleration. Professional inspection and repair are required. Engine overheating: After prolonged or aggressive driving, engine temperature may exceed normal levels, triggering the engine warning light. In this case, simply stop and let the engine cool naturally. Severe carbon buildup: Heavy carbon deposits in the engine can lead to poor acceleration and increased fuel consumption, requiring timely cleaning.

18

0

Share

How to Open the Hood of an Envision?

First, pull the handle under the driver's compartment, then go to the front center. With one hand pulling the hood upwards and the other hand reaching into the center gap, you will find a lever inside. Pull it forcefully to the right to open the hood. To close the hood, simply press it down manually. Below is an introduction to the Envision: 1. In terms of appearance, the new wing-shaped chrome strip runs through the LED wing-shaped headlights, widening the horizontal visual effect. The dynamic bumper surface and three-dimensional silver lower guard create a full and powerful front. The rear also features a three-dimensional wing-shaped design, with the electroplated strip connected to the taillights, paired with integrated dual exhaust pipes to enhance the sporty feel. 2. For the interior, it continues Buick's consistent high-end interior quality and introduces a newly designed 10-inch HD touchscreen. The vehicle is also equipped with front multifunctional seats, rear sliding seats with adjustable backrest angles, a large central storage box with a dual-opening design, a heated steering wheel, and a two-piece oversized panoramic sunroof. 3. In terms of power, the Envision offers a 2.0T-SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission and a 1.5T-SIDI direct-injection turbocharged engine paired with a 7-speed DCG-PLUS intelligent dual-clutch transmission. The former delivers a maximum power of 191kW/5500RPM and a peak torque of 400N·m/3000-4000RPM, while the latter provides a maximum power of 124kW/5600RPM and a peak torque of 250N·m/1700-4400RPM.

11

5

Share

How many days does it usually take for MoJie Car Rental traffic violations to be recorded?

When a traffic violation occurs while driving a motor vehicle, the processing time cycle for electronic monitoring by traffic police is approximately 3-5 working days. Therefore, to determine whether a motor vehicle is suspected of violating traffic laws, it can generally be checked one week later. If no results are found in the query, it can basically be confirmed that there is no violation. Below is relevant information: Electronic monitoring capture: For violations captured by electronic monitoring, they will be manually reviewed by local traffic police officers. The review mainly ensures that the captured photos can indeed confirm the violation. After approval, the violation record is entered into the local traffic police data center. DMV query: Violation information can be checked at the local DMV. The violation record will be synchronized to the local traffic police headquarters data center within 2 working days. This data can be queried anywhere.

3

Share

How many kilometers can a van run after the fuel light comes on?

A van can run about 50 kilometers after the fuel light comes on. Here are the details: Precautions: When the fuel light comes on, the vehicle can still run approximately 40 to 60 kilometers. You should refuel as soon as possible after the fuel light comes on to avoid the car stalling due to running out of fuel. Hazards: If you frequently wait until the fuel light comes on before refueling, it may cause damage to the fuel pump and filter. The fuel level sensor inside the fuel pump includes a float potentiometer, and there is a sliding resistor inside the fuel level sensor. When the fuel tank is full, the float's liquid level is at its highest point, and the potentiometer's resistance is at its lowest. Conversely, when the fuel tank is empty, the opposite occurs. The filter is a component that uses filter paper to remove impurities or gases and is a part of the engine.

19

1

Share

Can experienced students skip the training hours?

Why does the car body shake violently when the AC is turned on?

How Often Should Motul 7100 Engine Oil Be Changed?

Why does a motorcycle jerk at low speeds but run normally at high speeds?

How to Open the Hood of an Envision?

How many days does it usually take for MoJie Car Rental traffic violations to be recorded?

How many kilometers can a van run after the fuel light comes on?

What are the road traffic rules for motorcycles?

What is the Difference Between Adaptive Cruise Control and Full-Speed Adaptive Cruise Control?

Solution for P0480 Cooling Fan Control Circuit Malfunction?

How to Turn Off the Engine Start-Stop Function in Nissan Qashqai?