···
Log in / Register

Can Exhaust Improve Performance?

4 Answers
MacKai
09/03/25 7:21am
Exhaust can improve performance. Below is the relevant introduction to automobile performance evaluation indicators: 1. Power: The power of a car is expressed by the average driving speed that the car can achieve when driving in a straight line on a good road. The power of a car is mainly evaluated by three indicators: maximum speed; the acceleration time of the car; the maximum slope that the car can climb. 2. Fuel economy: The fuel economy of a car is often measured by the fuel consumption per 100 kilometers of driving under certain working conditions or the mileage that a certain amount of fuel can make the car travel. 3. Braking performance: The ability of a car to stop in a short distance while maintaining driving direction stability, and the ability to maintain a certain speed when going down a long slope is called the braking performance of the car.
Was this review help?
16
0
Share
JulietLee
09/15/25 8:42am
After upgrading the exhaust system on my old car, I noticed a significant power boost. Previously, there was a lag when pressing the accelerator, but now it responds instantly with more direct acceleration. The high-performance exhaust allows faster expulsion of gases, letting the engine breathe more freely. Of course, there are downsides, like increased noise levels—it's quite conspicuous on the streets and might violate noise regulations. I also replaced the air filter in tandem, which doubled the effect. Remember, modifications aren't a cure-all; choosing quality parts is crucial to avoid leaks or overheating. I recommend consulting a professional technician first for a thorough inspection. Overall, if you're after driving enjoyment, a well-planned exhaust upgrade is worthwhile, but don't expect it to revolutionize performance.
Was this review help?
15
2
Share
Expand All
StEden
10/30/25 2:33am
As a driving enthusiast, I've tried simple exhaust modifications like replacing the muffler or adding a resonator. There's a slight performance boost with more responsive throttle and smoother highway driving. Exhaust optimization can release excess engine energy, theoretically adding a few horsepower, but don't expect miracles. In daily driving, you might see minor fuel efficiency improvements and slightly cleaner emissions. However, compatibility is crucial - improper modifications can damage the catalytic converter or trigger warning lights. I recommend starting with basic upgrades, proceeding step-by-step, and finding a reputable tuning shop to measure airflow before making changes. Safety first - don't sacrifice your vehicle's overall health just for speed.
Was this review help?
7
0
Share
Expand All
LeBeckett
12/13/25 2:41am
Exhaust modification enhances performance by reducing backpressure. When engine exhaust flow is restricted, power output is limited; optimized airflow can unlock hidden horsepower. In modification cases I've observed, horsepower typically increases by 5-10%. However, don't act blindly – proper header and mid-pipe matching must be considered, otherwise it may affect emissions system efficiency. When properly matched, the engine responds faster to throttle changes across the rev range.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

Must a driver's license renewal be processed locally when it expires?

Driver's license renewal does not require returning to the local area for processing. Relevant information: 1. Application for transferring household registration should be submitted to the vehicle management office of the destination: According to Article 49 of the "Order No. 139 of the Ministry of Public Security of the People's Republic of China", if a motor vehicle driver's household registration is transferred out of the jurisdiction of the original vehicle management office, they should apply for a license replacement at the vehicle management office of the destination. 2. Nationwide open application for out-of-town applications: Now, all types of driver's licenses can be applied for and tested in different places nationwide. Applicants can apply for a driver's license in their place of residence with their ID card and residence permit. 3. Driver's license renewal can also be processed in different places: The replacement and renewal of driver's licenses (including renewal upon expiration, renewal upon reaching the specified age, renewal due to information changes, renewal due to damage, renewal due to changes in physical conditions that reduce the permitted driving models, replacement due to loss, etc.) and review can be processed in different places with an ID card.
11
3
Share

How to Deal with Fogging on the Outside of the Car Windshield on Rainy Days?

There are several solutions to deal with fogging on the outside of the car windshield on rainy days, which are as follows: 1. First, adjust the air vents to the front windshield, turn on the air conditioning cooling function, and use the external circulation mode. With the maximum fan speed, it usually takes only about ten seconds to quickly "blow" away the fog on the glass. 2. Use the external circulation mode for defogging. However, this method is not as fast and may take some time. It is not suitable when the external environment is poor, such as when there is a lot of dust. For effective defogging with external circulation, the correct vent position should be set to blow both the front windshield and the footwell, or only the front windshield. Additional tips for driving on rainy days: 1. Turn on the windshield wipers when driving in the rain. Adjust the wiper speed according to the intensity of the rain. Some cars have an automatic adjustment feature. 2. If the weather is gloomy with thick clouds and poor visibility, turn on the driving lights. 3. Reduce speed when driving in the rain, as heavy rain can cause hydroplaning. Although this phenomenon is not common, it is important to be cautious, especially during heavy rainfall and when turning. Always slow down in advance and pay attention to deceleration.
20
2
Share

What is the spark plug model for the New Alto?

The spark plug model for the New Alto is NGK platinum spark plugs. Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage wires according to the firing order and secure the cover.
9
5
Share

What kind of road surface is indicated when the headlights change from far to near?

When driving, if the headlight illumination distance changes from far to near, it indicates that the vehicle is approaching an uphill slope, or is nearing the bottom of a downhill slope, or is approaching a curve. Additional information: 1. From near to far: When the headlight illumination distance changes from near to far, it indicates a sharp curve ahead, a large pothole, the vehicle reaching the top of a hill, or an upcoming steep downhill slope. 2. Moving from the center to the side of the road: When the headlights shift from the center to the side of the road, it indicates an upcoming curve in the opposite direction of the illuminated side. If the lights shift from one side of the road to the other, it means the vehicle is entering a series of curves. 3. Shadows appearing and disappearing: If shadows continuously appear on the road ahead and disappear as the vehicle approaches, it indicates shallow continuous depressions on the road. If the shadows do not disappear, there may be significant depressions or transverse ditches. 4. Dim light: If the headlights illuminate the road surface with dim light, it indicates an asphalt road. If the road appears bright and the light is clear, it indicates a gravel road.
18
1
Share

Examination Process After One Year of Holding a B2 Driver's License?

B2 driver's license examination after the one-year probation period mainly tests knowledge of road traffic safety laws and regulations, safe and civilized driving, emergency handling, etc. After the exam, there is also a mandatory traffic accident case warning education session lasting no less than half an hour. Even with a perfect score, the exam is still required. Basic introduction to B2 driver's license: 1. Purpose of B2 driver's license: It allows driving heavy and medium-duty trucks or large, heavy, and medium-sized special-purpose vehicles. Heavy and medium-duty trucks are mostly trucks, such as the large dump trucks commonly seen on roads, which fall under the category of heavy-duty trucks. Large, heavy, and medium-sized special-purpose vehicles refer to vehicles equipped with special devices or equipment, such as sprinkler trucks, concrete mixer trucks, fire trucks, etc. 2. Other permitted vehicle types: Other vehicle types permitted under the B2 license include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery), which is the same as the B1 driver's license.
2
5
Share

Why is the brake of Buick Excelle soft?

There are several reasons for the soft brake of Buick Excelle: 1. Air in the brake oil pipe: If air enters the oil pipe, the brake oil will appear insufficient in strength under high pressure. Although there is still braking force, the maximum braking force is significantly weakened. At this time, the air should be exhausted at the maintenance station in time; 2. Water in the brake: The brake system is actually composed of a set of hydraulic system. The brake caliper is braked by the hydraulic transmission of brake oil. When braking, the brake pads and brake discs generate heat through friction. These heat is transmitted to the brake oil through the brake cylinder, eventually leading to the increase of the temperature of the brake oil. When the brake oil is at high temperature, water will vaporize to form compressible gas. These gases are not fixed in position and quantity in the brake pipeline, resulting in soft brakes; 3. Oil leakage in the brake oil pipe: Oil leakage in the brake master cylinder or brake oil pipe cannot ensure sufficient oil pressure; 4. Replacement of oversized tires: Too large tires will lead to insufficient brake torque and weakened braking force; 5. The brake pads are too soft: The material of the brake pads is too soft and the high-temperature performance is poor. Brake pads that meet national standards should be replaced.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.