Can ETC not be attached to the black area?

[DiIvan]

ETC cannot be installed in the black dotted area. During installation, peel off the protective film of the fixed adhesive backing and attach it to the car's front windshield. Of course, avoid attaching it to the black area, as the solar panel will not receive sunlight and thus cannot charge. How ETC works: Through the on-board electronic tag installed on the vehicle's windshield, specialized short-range communication is established with the microwave antenna in the ETC lane at toll stations. Computer networking technology is used for backend settlement processing with banks, thereby achieving the purpose of vehicles passing through highway or bridge toll stations without stopping to pay fees. Where can ETC be installed: For small vehicles such as cars and minivans, the ETC card and OBU device are installed in the upper middle part of the front windshield, while for large vehicles like trucks and buses, the installation position is in the lower middle part.

[ValentinaDella]

I've been thinking about this issue after driving for decades - you really shouldn't mount your ETC device on the black dotted area of the windshield. Those black strips usually have special coatings containing metallic or ceramic materials that can block signal transmission, which might cause toll stations to fail scanning your tag. Some ETC devices also rely on solar charging, and mounting them in shaded areas reduces light exposure, draining the battery faster and potentially causing mid-trip failures. I've seen many beginners install them incorrectly, leading to embarrassing traffic jams at toll gates where they eventually have to roll down windows for manual payment - not only time-consuming but also dangerous. The correct method is choosing a clear area away from black borders, securing it firmly and testing before hitting the road. If installed wrong, don't force removal; seek service station assistance to avoid glass breakage injuries. Proper installation ensures convenience and safety - never cut corners for temporary convenience.

[MartinLynn]

Hey car enthusiasts, let's talk about ETC placement. It's best not to install your ETC device on the black shaded area of your windshield. That black strip usually has a special coating that can interfere with RF signals or solar charging, which might make your ETC less responsive or unable to charge properly. Once when I was on a long road trip with a friend, his ETC was placed near the black border and couldn't be read at toll stations - it caused delays and ruined our schedule. My recommendation is to install it in the upper center of the windshield where it's transparent, making sure it's not blocked by wipers. Use strong double-sided tape to secure it and prevent vibration-related falls. Regularly check the battery and signal strength, and if you've installed it wrong, don't hesitate to reposition it immediately. Proper placement leads to smoother drives with fewer hassles, and developing a habit of regular maintenance is equally important.

[OliveDella]

When my husband first installed the ETC, he forcefully stuck it on the black shaded area, which kept causing errors at toll stations. The black strip likely has a blocking layer that prevents signal transmission or weakens it, leading to malfunctions. The mechanic suggested placing it on the transparent glass area to ensure smooth communication. After we repositioned it to the middle section, all issues disappeared. When reapplying, thoroughly clean the surface to avoid dirt affecting adhesion, and be patient when removing—use tools to pry gently to prevent glass breakage. Proper placement avoids delays and ensures a convenient experience.

[Trevor]

To be straightforward, the ETC device should not be installed on the blackened areas of the windshield. The black zones contain shielding materials that may interfere with signal transmission or solar absorption. Choose a transparent section of the glass, such as the upper center area, for installation and avoid obstructions. First, clean the surface with alcohol, then firmly attach the device using double-sided adhesive tape to ensure stability. Regularly check the battery status. Incorrect installation may lead to recognition failure or device malfunction. Follow the instruction manual carefully and seek professional assistance if necessary to ensure proper installation at the first attempt, eliminating future concerns for a worry-free driving experience.

[DiKeegan]

Speaking of this, I had an embarrassing experience with my ETC device recently. I stuck it on the black border thinking it wouldn't affect anything. But the toll station couldn't detect it, and the staff had to ask me to pull over for handling, which was quite frustrating. Later, I looked it up and found that black areas with coatings like metal or ceramic can block signals and disable the tag. After moving it to the transparent center of the windshield, it worked fine. My advice is to test the position during installation, avoid black strips to prevent embarrassment and delays, stick it firmly for peace of mind while driving, and to protect the device from wear and tear, making maintenance much simpler.