Can Electric Vehicles Drive on Highways?

1 Answers
DiBryce
07/29/25 4:58pm
Electric vehicles can drive on highways, but it's important to note that there is a difference between electric vehicles and four-wheeled mobility scooters. Only officially purchased electric vehicles with license plates are permitted to drive on highways. Before driving an electric vehicle on a highway, it is necessary to check the vehicle's performance, tire pressure, and brakes to avoid potential safety hazards. Ensure the tire pressure is within the normal range before driving. According to relevant regulations: pedestrians, non-motorized vehicles, tractors, wheeled special machinery vehicles, articulated buses, full trailer trucks, and other motor vehicles with a maximum design speed of less than 70 kilometers per hour are not allowed to enter highways. The maximum speed limit indicated by highway speed signs shall not exceed 120 kilometers per hour.
Was this review help?
10
2
Share
More Forum Discussions

What is the minimum and maximum speed for 2nd gear?

2nd gear speed should not be lower than 20 or higher than 30. Below is relevant information about gears: 1. Concept: Gears are adjustment devices that regulate a car's speed and traction (torque). The lower the gear, the slower the speed, but the greater the car's traction (torque). The higher the gear, the faster the speed, but the smaller the car's traction (torque). Gears are generally divided into two categories: forward gears and reverse gears. Engaging forward gears makes the car move forward, while engaging reverse gear makes the car move backward. 2. Standard car gears: Typically, standard cars have five forward gears and one reverse gear. First gear is the starting gear, where the speed is the slowest (0-10 km/h), but the torque is the greatest.
3
4
Share

What are the requirements for a bus driver's license?

The requirement for a bus driver's license is a B1 license. The vehicle types permitted to be driven with a B1 license are medium-sized buses, defined as medium-sized passenger vehicles not exceeding 6 meters in length, with a rated passenger capacity of 10 (inclusive) to 19 (inclusive) people. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). Below are the types of driver's licenses and the permitted vehicle types: 1. A1: Permitted vehicles: Large passenger vehicles. Other permitted vehicle types: A3, B1, B2, C1, C2, C3, C4, M. 2. A2: Permitted vehicles: Heavy and medium-sized full trailers and semi-trailers. Other permitted vehicle types: B1, B2, C1, C2, C3, C4, M. 3. A3: Permitted vehicles: City buses with a rated capacity of 10 or more passengers. Other permitted vehicle types: C1, C2, C3, C4. 4. B1: Permitted vehicles: Medium-sized passenger vehicles (including city buses with a rated capacity of 10 to 19 passengers). Other permitted vehicle types: C1, C2, C3, C4, M. 5. B2: Permitted vehicles: Heavy and medium-sized trucks; heavy and medium-sized special-purpose vehicles. Other permitted vehicle types: C1, C2, C3, C4, M. 6. C1: Permitted vehicles: Small and mini passenger vehicles, as well as light and mini trucks; light and mini special-purpose vehicles. Other permitted vehicle types: C2, C3, C4.
15
3
Share

How to Cancel a Scheduled Subject 3 Driving Test?

To cancel a scheduled Subject 3 driving test, there are three methods: If you wish to cancel a few days before the test, you can directly cancel it on the Traffic Management 12123 app. If you want to cancel one day before the test, you must personally bring your ID card and a copy of it to the Vehicle Management Office to cancel. On the blank space of the ID card copy, you must write "I voluntarily cancel the Subject 3 test scheduled on xx/xx/xxxx at xx driving school" and sign your name, contact information, and the date in the blank space. If you are unable to go in person, a representative can bring their own ID card and a copy along with the canceler's ID card and copy. In addition to writing the above content in the blank space, the representative must also sign their name.
7
1
Share

What are the reasons for ineffective braking when reversing?

Reasons for ineffective braking when reversing: Excessive wear of brake pads: Brake pads have a service life. Once they are excessively worn, they should be replaced in time. Otherwise, it can easily lead to ineffective braking and may also affect the brake discs. In severe cases, it can cause damage to the braking system. Deterioration of brake fluid: Brake fluid, commonly known as brake oil, absorbs moisture from the air during long-term use, which lowers its boiling point. When the boiling point drops significantly, it can affect the vehicle's braking performance, resulting in ineffective braking. Therefore, brake fluid needs to be replaced regularly. Newly replaced brake pads: Newly replaced brake pads have not yet properly broken in with the vehicle, so they may initially cause ineffective braking. New brake pads also require a certain break-in period to maximize their braking effectiveness.
12
0
Share

Is It Normal for New Car Headlights to Fog Up?

New car headlights fogging up is normal. Here are the extended details: Reasons: Due to temperature changes inside the headlight, once humid air enters, it becomes difficult to escape, causing moisture to accumulate inside. This is especially noticeable when the headlights haven't been used for a long time. When the car is driven, particularly during nighttime with frequent headlight usage, the residual heat from the headlights will warm the air inside the headlight housing, evaporating the moisture and accelerating its removal. Principle of Headlight Fogging: In all current vehicle models, whether equipped with halogen, xenon, or the more technologically advanced LED headlights, there is a rubber vent tube behind these lights. When the headlights are turned on instantly or during normal driving, the generated heat is expelled through this tube. However, the presence of this tube also allows moisture from the air to 'seize the opportunity' to enter the headlight interior. Over time, this moisture forms fog and accumulates into small water droplets.
16
2
Share

Why is it easy to mistake the accelerator for the brake?

Reasons for mistaking the accelerator for the brake include poor driving habits. Below are specific explanations: Driving an unfamiliar car model: Many novice drivers are unfamiliar with the operation principles of automatic transmission cars when driving them for the first time. If they mistakenly press the accelerator instead of the brake, the consequences can be quite severe. Incorrect gear selection during temporary stops: When using an automatic transmission car to go downhill in an underground garage, mistaking the accelerator for the brake will cause the car speed to continuously increase, posing a danger to both the vehicle and its occupants. Poor driving habits: Panicking in emergencies, many novice drivers tend to keep their foot near the accelerator pedal even after releasing it. This practice is not advisable. Drivers should develop the habit of placing their right foot on the brake pedal when not pressing the accelerator, keeping it ready at all times. This way, even for beginners, in case of an emergency, stepping down will immediately apply the brake.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.