Can Duster Wax Be Sprayed Directly on the Car?

1 Answers
VanessaDella
07/30/25 10:58am
Duster wax can generally be sprayed directly on the car, but the owner needs to apply to the vehicle management office at the registration location. Below is an introduction to duster wax: 1. Introduction: Spraying duster wax on a car duster can effectively absorb floating dust and also provides a certain waxing and polishing effect on the car's paint. 2. Method: It is best not to wet the car duster before use, as most of the dust on the car body is dry. A dry car duster can easily sweep away the dust. The method involves evenly spraying the duster wax on the duster, making it slightly damp. You can wait for a while to allow the duster to fully absorb the wax, which will make it more effective in collecting dust. 3. Follow-up: After dusting the car body, there may be excess wax remaining, which should be wiped clean with a dry cloth to avoid unnecessary trouble. However, it is also important to maintain the duster's moisture level. The cleaning process should be carried out from the roof to the body, proceeding from top to bottom.
Was this review help?
7
1
Share
More Forum Discussions

Where is the oil dipstick located on the Audi A6L?

Audi A6L uses an electronic oil level gauge, and the oil level can be checked through the MMI display inside the vehicle. Below is relevant information about the Audi A6L: 1. Introduction to the Audi A6L: The Audi A6L was the first Audi model to enter the Chinese market, with its predecessor being the third-generation Audi 100 (code C3) introduced in China in 1988. 2. Body structure of the Audi A6L: The new Audi A6L is closer to Audi's flagship model, the Audi A8, in terms of lightweight body technology. The new Audi A6L adopts a steel-aluminum composite body structure, extensively using aluminum sheets, aluminum profiles, aluminum castings, and hot-formed steel, including body panels. Aluminum components of different processes are used for the front suspension strut towers, suspension tower reinforcement bars, front and rear suspension structural components, and front and rear bumper crash beams, reducing the body weight, including doors and hoods, by 16 kilograms.
13
4
Share

Is a 5-kilometer new car normal?

5-kilometer new car is normal. Because the new car will generate mileage during factory loading/unloading and transportation to the sales point, generally anything under 30 kilometers is considered normal. Reasons for new car mileage: Usually when a new car arrives at a 4S store, its odometer won't show 0 kilometers. This is because after production, manufacturers have professionals conduct test drives and evaluations to identify potential issues. Additionally, the car will accumulate some mileage during transportation from the factory to the dealership. Other criteria for identifying new cars: Mileage isn't the only standard for identifying new cars. When taking delivery, you should open the engine hood to check the production date. Verify whether there's a significant gap between the production date and delivery date - smaller gaps usually mean less movement. While it's impossible to avoid movement between production and sales, a smaller gap between production and delivery dates reduces the likelihood of dealerships tampering with the odometer.
19
2
Share

What are the methods to avoid car exposure to the sun in summer?

Avoiding car exposure to the sun in summer can be achieved by: 1. Applying glaze sealing to the car; 2. Parking the car in shaded areas or underground garages; 3. Applying full-car sun films; 4. Covering the car with a car cover; 5. Placing sunshades in the car; 6. Slightly opening the car windows by two to three fingers' width; 7. Regularly washing the car. The effects of summer sun exposure on cars include: 1. Reduced wear resistance of the interior, leading to whitening; 2. Issues with aftermarket electronic devices; 3. Deterioration of in-car air quality; 4. Increased car body temperature due to sun exposure, and contraction at night causing paint and rubber to peel and age; 5. Oxidation of car paint under UV rays, resulting in decreased glossiness.
6
3
Share

What Are the Consequences of Water Entering Engine Oil?

Water entering engine oil can lead to minor issues such as excessive engine temperature, or more severe problems like cylinder scuffing and bearing seizure. In the worst cases, it can even cause the engine to be scrapped. The principles are as follows: 1. Water Content in Oil: Normally, the water content in oil is below 0.03%. If it exceeds 0.1%, additives in the lubricant (such as antioxidants and detergents) will react with water and become ineffective, reducing the oil's performance. 2. Chemical Reaction: Under the high temperature inside the engine, the oil reacts chemically with the coolant, leading to emulsification of the oil, which significantly diminishes its lubricating properties. 3. Inorganic Acids: When the oil's antioxidant performance declines, organic acids generated from oil oxidation react with water to form inorganic acids. These acidic substances can corrode engine components, causing rust or damage.
1
3
Share

Why was the BJ20 discontinued?

The main reason for its discontinuation is the low sales volume of this model. Below is a relevant introduction to the BJ20: 1. Exterior: The most satisfying aspect of this car is its exterior. The rugged and boxy body design gives off a strong off-road vehicle vibe, and the iconic split headlights on the front face are highly distinctive. However, the overall design is somewhat too aggressive, so while some people love it, others find it unacceptable. 2. Interior: The interior of the BJ20 is fairly standard. According to feedback from users, the comfort for rear passengers is relatively poor. The seats are not soft enough, and the stiff suspension tuning results in a noticeable bumpy ride. The trunk space is also quite small, though it is sufficient for daily commuting. 3. Performance: The car feels sluggish when starting, lacking some driving excitement. However, the 1.5T engine performs decently once it gets up to speed. The main drawback is the significant wind noise at high speeds, which requires turning up the music volume to mask the noise.
19
4
Share

Can New Energy Vehicles Keep the Air Conditioning Running While Parked?

Yes. Here are some precautions for using new energy vehicles: 1. Avoid high-current discharge: When starting, carrying passengers, or going uphill, try to avoid sudden acceleration to prevent instantaneous high-current discharge. High-current discharge can easily lead to the formation of lead sulfate crystals, thereby damaging the physical properties of the battery plates. 2. Never store the battery in a depleted state: The battery must not be stored in a depleted state. If the battery is low on power after use, it should be recharged promptly. 3. Master the correct charging time: During use, accurately determine the charging time based on actual conditions, considering factors such as frequency of use and driving distance to determine the charging frequency. 4. Regularly check tire pressure: Maintain the correct tire pressure and check it every two weeks or at least once a month. Incorrect tire pressure can increase power consumption, reduce driving range, decrease driving comfort, shorten tire lifespan, and compromise driving safety. 5. Avoid exposure to extreme heat: High temperatures can increase internal battery pressure, causing water loss, reducing battery activity, and accelerating plate aging. Therefore, electric vehicles must not be exposed to direct sunlight and should be parked in shaded areas.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.