···
Log in / Register

Can Driving School Be Transferred?

4 Answers
McPiper
09/07/25 3:37am

Students can transfer driving schools, which is their most basic right. Here are the relevant details: 1. Transfer procedures: Students need to obtain a transfer certificate from their original driving school, then retrieve their files from the vehicle management office or the driving school, and finally report to the new driving school with the files and transfer certificate. 2. Transfer fees: If a student applies for a transfer due to personal reasons without having taken any subject exams, they will be required to pay a penalty of 20% of the tuition fee. Below is additional information about driving school transfers: 1. Transfer fees: If a student requests a transfer after failing the subject one exam, a fee of 250 RMB will be deducted for file establishment and service, along with 150 RMB for theoretical training. 2. Transfer fees: If the driving school fails to arrange a subject two exam for students who have passed subject one within 60 days, a full refund can be issued. 3. Transfer fees: For students who have participated in subject two training but have not exceeded one-third of the total training hours for subject two or the 90-day training period, in addition to the deduction for file establishment, service fees, and theoretical training fees, an hourly fee of 60-80 RMB will be deducted for practical vehicle training.

Was this review help?
10
3
Share
VanMiguel
09/19/25 3:04am

When I was learning to drive, I had to transfer schools due to a job change, and it went quite smoothly. I asked my original driving school instructor, and he said it would be fine as long as I found a school willing to take over, mainly requiring proof of training records showing what I had learned. I brought my ID card and the progress report from the original school to consult with the new place. After their evaluation, they directly arranged for me to continue the course. Remember to negotiate the fees properly—the original school might refund part of the money, while the new school might charge extra. Don’t wait until you’re halfway through to transfer; preparing early can save a lot of hassle. Policies vary by location, but overall, it’s feasible. The key is to communicate well and agree on terms between both sides. I didn’t lose any of my progress and passed the driving test on the first try, so don’t worry too much about the transfer.

Was this review help?
13
4
Share
Expand All
KeiraFitz
11/02/25 3:25am

I'm currently getting my driver's license but planning to move to another city, really worried about transferring schools. Consulted the new driving school, they said just need to submit training certificates and ID copies. The original school must provide a learning record form, and the new place will arrange follow-up practice based on progress. I noticed big fee differences - new school tuition might be higher, old school refunds less, need to calculate carefully. Don't wait too long to process, keep synchronized to avoid training interruption. Also, finding same-brand or chain driving schools is easier since they have more internal agreements. Overall, transferring is completely doable, just ask instructors and front desk more beforehand to get it sorted.

Was this review help?
1
0
Share
Expand All
AshleyLee
12/16/25 3:29am

Transferring driving schools is a common practice. Prepare your original ID card and previous training certificates, then contact the new driving school to confirm the transfer process. They will evaluate your remaining course hours and arrange a test. Fees may increase or decrease, so inquire about the details in advance. Don’t overlook the details of your training records to ensure continuity and safety. It’s a simple process—just don’t delay.

Was this review help?
1
4
Share
Expand All
More Forum Discussions

What does automatic parking mean?

Automatic parking system refers to a system that can park the vehicle automatically without human intervention. The introduction of automatic parking is as follows: Principle of automatic parking: Radar sensors around the vehicle measure the distance and angle between the vehicle and surrounding objects. Then, the onboard computer calculates the operation process and adjusts the steering wheel rotation in coordination with the vehicle speed. The driver only needs to control the vehicle speed. Limitations of automatic parking: Environmental conditions have a certain impact on the parking space measurement and parking process. For example, when leaves, debris, or ice and snow cover the curb, the parking steering assist system may have difficulty identifying the curb. When approaching a closed gate at the entrance of a courtyard, the system may mistake it for an ideal parking space. If there are small-sized traffic warning poles in the parking space, the system may fail to recognize them and consider the space as a valid parking spot. Reducing the vehicle speed can help improve the system's probability of identifying small-sized items in the parking space.
14
0
Share

What does the push button on the car air conditioner mean?

The push button on the car air conditioner means that the function is activated by pressing. Here are some precautions for using the car air conditioner: 1. Regular dust removal: Periodically turn the air conditioner to the maximum setting for about 10 minutes to effectively prevent dust accumulation. Alternatively, clean the air filter during car washing, and using an air conditioner cleaner appropriately can also help. 2. Suitable temperature: Normally, the temperature inside the car should be adjusted to around 26~27 degrees. 3. Switching modes: When the air conditioner is first turned on, use the external circulation to lower the temperature inside the car, then switch to internal circulation, but remember to alternate between these two modes periodically. 4. Check for leaks: It is essential to regularly check the engine cover and chassis for leaks. If exhaust gas leakage is detected inside the car, it should be repaired promptly.
9
1
Share

What transmission does the Honda CR-V use?

Honda CR-V is equipped with two types of transmissions: a 6-speed manual transmission and a CVT (Continuously Variable Transmission). The continuously variable transmission is a type of automatic transmission that can continuously obtain any transmission ratio within the speed range. Through the CVT, the optimal match between the transmission system and the engine conditions can be achieved. The difference between this transmission and a conventional automatic transmission is that it eliminates the complex and bulky gear combination transmission and instead uses only two sets of pulleys for speed transmission. The Honda CR-V is a classic urban SUV model produced by Dongfeng Honda Automobile Company. In terms of body dimensions, the Honda CR-V measures 4550mm in length, 1820mm in width, and 1685mm in height.
6
2
Share

What are the differences between coated windshield washer fluid and regular windshield washer fluid?

Here are the specific differences between coated windshield washer fluid and regular windshield washer fluid: 1. Coating effect: Coated windshield washer fluid has the ability to coat the glass, and long-term use can form a protective film on the surface of the car's glass. In rainy weather, it is less likely to retain water, providing the driver with a stable and clear field of vision, thereby improving driving safety to some extent; whereas regular windshield washer fluid does not have this function. Regular windshield washer fluid used in vehicles mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surface-active agents. It has practical functions such as cleaning, antifreeze, antistatic, and anti-corrosion. 2. Cleaning effect in rain and snow: Coated windshield washer fluid can provide better cleaning performance in rainy or snowy weather, maintaining good visibility; whereas regular windshield washer fluid is slightly inferior in this aspect.
10
5
Share

Does Shifting from P to R Gear with Abnormal Noise Damage the Car?

Shifting from P to R gear with abnormal noise can damage the car. Here are the precautions for gear shifting while driving: 1. Normal roads: There are no specific requirements for the car's gear; you can drive normally by keeping it in D gear. 2. Parking: When the engine stops running, shift to P gear to indicate the car is out of use. Some cars require shifting to P gear to remove the key. 3. Reversing: After stepping on the brake and ensuring the car stops moving forward, shift to R gear. Gently releasing the brake will allow the car to reverse. 4. Waiting while parked: Or when driving on congested roads, you can shift to N gear. 5. Highways: Or when overtaking at high speed, you can shift to S gear. S gear is the car's sport mode, allowing free gear changes like D gear. S gear can also be chosen when climbing slopes, as it provides the maximum torque output and acceleration.
3
5
Share

What Maintenance Should Be Done for a Car with 70,000 Kilometers?

For a car that has traveled 70,000 kilometers, the maintenance includes changing the engine oil, oil filter, cabin air filter, as well as inspecting the brake pads and brake discs. Below are the details of routine car maintenance items: 1. Engine Oil and Oil Filter Replacement: This primarily involves maintenance of the lubrication system, whose main function is to effectively lubricate various components of the car engine to prevent excessive wear. The oil filter's role is to remove various impurities from the engine oil, ensuring the normal operation of the lubrication system. The oil filter should be replaced along with the engine oil during an oil change. Under normal circumstances, a car should undergo maintenance every 5,000 kilometers. 2. Filter Replacement: The air filter's function is to filter the air before it enters the cylinders, removing impurities, dust, sand, and other foreign particles. The cleaning and maintenance of the air filter depend on the usage environment. The fuel filter is typically replaced after traveling 20,000-25,000 kilometers. 3. Spark Plug Replacement: Spark plugs are consumable parts and should be replaced every 20,000 kilometers. Additionally, components such as brake fluid, transmission fluid, battery, throttle body, fuel injectors, and brake pads are all part of the inspection items during routine maintenance, and their maintenance should be carried out based on usage conditions.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.