Can Dashboard Wax Be Sprayed on Leather Seats?

Is there an 'i' in license plates?

License plates do not have the letter 'i'. The reason is that 'i' is similar to the Arabic numeral '1', and it is omitted to avoid confusion. License plates are plates hung on the front and rear of a vehicle, made of materials such as aluminum, sheet iron, plastic, or paper. They are categorized by their applicable scope into: 1. Special license plates for new energy vehicles; 2. License plates for large vehicles; 3. License plates for small vehicles; 4. License plates for trailers. License plates also refer to vehicle registration plates, and their functions are: 1. To identify the region to which the vehicle belongs; 2. To trace the owner and registration information of the vehicle based on the license plate. The installation method for license plates is: 1. Align the license plate with the fixed points on the vehicle and ensure it is straight and properly aligned; 2. Insert the screw rod into the holes of the vehicle's fixed points and secure the screws with a flat-head screwdriver; 3. Snap on the four screw caps in sequence.

11

4

Share

How to Maintain Car Tires?

Methods for car tire maintenance include: 1. Ensure correct tire pressure: Different vehicles have varying pressure standards for front, rear, and spare tires. The standard tire pressure data provided by the car manufacturer is usually posted on areas like the vehicle door pillars. Increasing the pressure by 25% can reduce tire life by approximately 30%. 2. Tire appearance inspection: Regularly check for bulges, cracks, cuts, punctures, and abnormal wear on the tires. Pay special attention to the wear on the tire tread and edges, as abnormal wear is often caused by poor alignment or incorrect tire pressure. 3. Keep tire surfaces clean: Maintaining cleanliness is one of the key factors in extending tire life. Especially in winter, pay attention to tire cleanliness before and after driving. Before driving, check if the tire tread is covered with ice or snow. If the ice or snow in the tread is very hard, do not force it out or pour boiling water on the tire. Instead, use lukewarm water to clean the tire thoroughly. Also, check for foreign objects like stones, metal pieces, or nails in the tread, especially on new tires, and remove them promptly. 4. Tire alignment and balancing: If you notice uneven tire wear or excessive vehicle vibration, it may be due to poor alignment or imbalance. These issues not only shorten tire lifespan but also affect vehicle handling. Immediately take the vehicle to a service station for inspection and perform a four-wheel alignment or tire dynamic balancing based on the results.

19

3

Share

Where is the fog light switch located on the Boyue?

The fog light switch on the Boyue is located on the light control lever on the left side of the vehicle, which can be seen when the door is opened. The button at the top of the middle part of the control lever is the front fog light switch, and the button below is the rear fog light switch. The Boyue is a compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, and a fuel tank capacity of 58 liters. The Boyue is equipped with a 1.8T turbocharged engine, with a maximum power of 120kW, maximum power speed of 5500rpm, maximum torque of 250Nm, and maximum torque speed ranging from 1500 to 4500rpm.

8

0

Share

What are the symptoms of a worn-out rear axle bushing?

When the rear axle bushing is worn out, it loses its ability to absorb shocks, leading to vibrations and unusual noises from the chassis. Severe vibrations can affect the vehicle's driving stability and comfort. The rear axle refers to the component of the rear drive shaft that transmits power in a vehicle. It consists of two half-axles, allowing for differential movement. Additionally, it supports the wheels and connects the rear wheels. In front-wheel-drive vehicles, the rear axle is merely a trailing axle, serving only a load-bearing function. More details are as follows: 1. If the front axle is not the drive axle, then the rear axle serves as the drive axle. In this case, besides bearing the load, it also functions in driving, deceleration, and differential action. For four-wheel-drive vehicles, a transfer case is usually installed in front of the rear axle. Rear axles are categorized into solid axles and semi-axles. Solid axles are paired with non-independent suspensions, such as leaf spring suspensions, while semi-axles are paired with independent suspensions, like MacPherson strut suspensions. 2. The front and rear axles refer to the wheel axle sections. The front axle includes components like shock absorbers, steering gears, and balance shafts, while the rear axle also includes the drive shaft and transmission gears. Multi-axle trucks may have both driven rear axles and non-driven rear axles at the rear. Non-driven rear axles lack a drive shaft connection and are not part of the driving wheels, typically found in heavy-duty trucks and tractor heads with three or more axles. 3. The large bulge at the center of the rear axle is present only when the rear axle is a drive axle, as it houses the deceleration gears and differential mechanism. Trailing rear axles generally do not have this bulge.

15

0

Share

How often should the transmission fluid be changed for a Honda CR-V?

The replacement interval for Honda CR-V transmission fluid depends on the transmission type: 1. Automatic transmission fluid should be changed every 40,000 kilometers; 2. Manual transmission fluid should be changed every 60,000 kilometers. Taking the 2021 Honda CR-V Hybrid 4WD Pure Enjoyment Edition as an example, its body dimensions are: length 4621mm, width 1855mm, height 1689mm, with a wheelbase of 2660mm and a fuel tank capacity of 53 liters. The 2021 Honda CR-V Hybrid 4WD Pure Enjoyment Edition is equipped with a 1.5L turbocharged engine, with a maximum power speed of 5600 rpm and a maximum torque speed ranging from 2000 to 5000 rpm.

11

4

Share

Will Removing the Paint Protection Film Damage the Car Paint?

Removing the paint protection film does not damage the car paint. The paint protection film is a high-performance, environmentally friendly new type of film, commonly known as a transparent paint protection film. Its characteristics include: 1. Excellent ductility and super tensile strength, allowing it to be applied on any curved surface; 2. It blends seamlessly with the original car paint, not affecting the car's original color, and can enhance the glossiness of the paint by 5% to 20%; 3. It can resist damage to the paint surface from petroleum, grease, weak alkalis, sand, and acid rain; 4. Super softness and memory properties, enabling it to withstand general scratches and abrasions; 5. Good UV resistance, preventing long-term damage to the car paint and maintaining the glossiness of the original factory paint.

6

0

Share

Can Dashboard Wax Be Sprayed on Leather Seats?

Is there an 'i' in license plates?

How to Maintain Car Tires?

Where is the fog light switch located on the Boyue?

What are the symptoms of a worn-out rear axle bushing?

How often should the transmission fluid be changed for a Honda CR-V?

Will Removing the Paint Protection Film Damage the Car Paint?

How Many Degrees Can the Steering Wheel Turn?

What Causes Occasional Brake Noise in Volkswagen Bora?

Does BMW Need Matching After Battery Replacement?

What colors are available for the Jetta VS5?