Can Dash Cams Record Clearly at Night?

2 Answers
SebastianLynn
07/24/25 10:56am
Dash cams can record clearly at night. Many dash cams now come with night vision capabilities, allowing them to capture clear footage even in low-light conditions. It is recommended to purchase and use well-known brands with effective night recording features. Additionally, adjusting the exposure settings of the dash cam can help capture more details in high-contrast environments. Dash cams record the driving process, and in the event of an accident or dispute, the recorded video can serve as authentic and authoritative evidence. The basic components of a dash cam include: 1. Main unit; 2. Speed sensor; 3. Data analysis software; 4. Infrared camera.
Was this review help?
10
1
Share
VonDelaney
08/11/25 5:57am
Whether it can capture clear nighttime videos mainly depends on the performance parameters of the dash cam. Having played with many electronic devices, I know the key lies in its sensor type and aperture size. For instance, Sony's low-light sensors and models with larger apertures perform much better in dim conditions. Infrared assistance and wide dynamic range features can make the footage brighter and clearer, avoiding overexposure or darkness. Of course, on completely unlit rural roads, even high-end devices might produce blurry images, so it's best to choose a product with starlight night vision. For daily use, regularly check and clean the lens to prevent dust from affecting performance. Nighttime driving safety is crucial, and clear recordings can help you quickly prove facts in case of accidents. It's advisable to review product test reports, focusing on low-light performance indicators to ensure the device can handle various lighting changes.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

How to Defog While Driving in Winter?

You can defog your car in winter by following these methods: If the vehicle speed is not very fast, you can use air convection: Open a small gap in the car window to allow air convection between the inside and outside of the car. After a while, the fog on the inner glass will dissipate. Use a car-specific anti-fog spray: Before applying the anti-fog spray, first clean the inside of the front windshield, then spray an appropriate amount of the anti-fog spray. After the spray solidifies, wipe it clean with a clean towel. The anti-fog spray forms a water-repellent layer between water molecules and the inner surface of the glass, keeping the glass surface clean and preventing fogging. Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog: In summer, especially when multiple people enter the car without turning on the air conditioning in time, the high humidity of exhaled air can quickly cause the front windshield to fog up. At this point, you can turn on the air conditioning to blow cold air toward the front windshield. Using the air conditioning's dehumidifying function, the fog on the front windshield can be removed quickly.
13
3
Share

What brand of car is L?

L is the logo of Lexus, a brand under Toyota Motor Corporation. Currently, Lexus primarily offers 16 model series, covering categories such as sedans, SUVs, MPVs, and sports cars. Some of the well-known models include the Lexus CT, Lexus ES, and Lexus LS. Below are the configuration and powertrain details of the Lexus ES200 Excellence Edition: Configuration of the Lexus ES200 Excellence Edition: The ES200 Excellence Edition comes standard with features such as an electric sunroof, LED headlights, automatic welcome lights, front seat electric adjustment/heating, electric steering wheel adjustment, keyless entry, one-touch start, dual-zone automatic climate control, negative ion generator, 7-inch LCD instrument cluster, 7-inch central control screen, intelligent safety system, rearview camera, 10 airbags throughout the vehicle, and 10-speaker audio system. Powertrain of the Lexus ES200 Excellence Edition: The Lexus ES200 Excellence Edition is equipped with a 2.0L naturally aspirated engine paired with a CVT transmission. It delivers a maximum power of 173 PS, a maximum torque of 208 Nm, and a combined fuel consumption of 6.25L per 100 km.
15
2
Share

How many more kilometers can an Audi A6 drive after the brake pad warning light comes on?

Audi A6 brake pad warning indicates that the brake pads have worn to the manufacturer's preset wear limit. After the warning, the brake pads typically have 2 to 4mm thickness remaining and can theoretically drive about 1000 kilometers. When the brake pads are completely worn out, metal-on-metal contact occurs, which can groove the brake discs and increase safety hazards. Therefore, after the brake warning, you should inspect and replace them as soon as possible. Below are the signs of completely worn brake pads: Squeaking noise when lightly braking: If there is a metal-on-metal squeaking noise when lightly braking, the brake pads must be replaced immediately. This is because the wear indicators on both sides of the brake pads are already directly rubbing against the brake discs, indicating the pads have exceeded their limit. Difficulty braking: If braking feels very difficult, it means the brake pads have basically lost their friction and must be replaced immediately to prevent serious accidents.
20
1
Share

Can non-vehicle owners apply for ETC?

Non-vehicle owners can also apply for ETC. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Highways" issued by the Ministry of Transport, the original valid ID card of the vehicle owner, the original and copy of the vehicle registration certificate, and the page with the latest annual inspection stamp on the registration certificate are required. If applying on behalf of others, the original valid ID card of the agent is also required. If applying for ETC through major bank branches, a debit card or credit card from the corresponding bank must be prepared. Some banks only support ETC binding with credit cards, while others may require freezing a certain amount as a deposit when binding ETC with a debit card. The principle of ETC deduction: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the vehicle can pay the toll without stopping at the toll station. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the main indicators of the "13th Five-Year" comprehensive transportation development: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC usage rate for passenger vehicles, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a stopped vehicle ahead, to prevent the ETC device of the preceding vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatically sensing and paying for the preceding vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, leading to deduction failure. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not man-made, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
3
4
Share

Is it necessary to install a 360° panoramic camera?

360° panoramic cameras are essential for drivers with limited driving skills, while they are optional for experienced drivers. The 360° panoramic monitoring system utilizes four wide-angle cameras positioned at the front, sides, and rear of the vehicle to monitor the surrounding conditions, providing the driver with a 360° panoramic view to eliminate all blind spots. Here are the functions of the 360° panoramic camera: After installing a 360° panoramic camera dashcam, the owner can intuitively view the surrounding environment of the vehicle through the original car screen. By performing normal driving operations such as shifting into reverse gear, turning on the turn signal, or using the turn lever, the view can be freely switched, enhancing driving safety.
13
5
Share

Can I get a B license directly without a C license?

You cannot get a B license directly without a C license. Below are the conditions for applying for a B license: Age and physical conditions: For B1: Age must be between 21 and 50 years old, height must be at least 1.5 meters, uncorrected or corrected visual acuity must reach 5.0 or above on the logarithmic visual acuity chart. For B2: Age must be between 21 and 50 years old, height must be at least 1.55 meters, uncorrected or corrected visual acuity must reach 4.9 or above on the logarithmic visual acuity chart. No red-green color blindness; must be able to distinguish the direction of sound sources with each ear at 50 cm from a tuning fork; both thumbs must be intact, and each hand must have at least three other fingers intact with normal limb and finger movement functions; no motor dysfunction. Other conditions: For B1: Applicants must have held a C1, C2, C3, or C4 (Class C) driving license for at least three years and have no full-point records in the two most recent scoring cycles before application, or have held an A3 or B2 driving license for at least one year and have no full-point records in the most recent scoring cycle before application. For B2: Applicants can apply directly as first-time applicants, or must have held any driving license for at least one year and have no full-point records in the most recent scoring cycle before application.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.