Can Coca-Cola Polish Car Headlights?

What does the SVS yellow warning light indicate?

The SVS yellow light on the dashboard refers to the fault indicator light. It is a warning light triggered when the ECU (Engine Control Unit) or TCU (Transmission Control Unit) of an electronically fuel-injected vehicle detects issues with the engine or automatic transmission. Similar to the engine fault light, when the SVS indicator illuminates, it indicates that the engine control unit has detected an erroneous signal from a sensor or that a parameter has exceeded standard operating limits. Additional information: 1. Consequences of the SVS yellow light: If accompanied by symptoms such as increased combustion chamber temperature or activation of the oil pressure warning light, continued driving may significantly accelerate engine wear and potentially cause premature engine failure. 2. Solutions for the SVS yellow light: First check whether other vehicle systems show abnormalities (e.g., coolant temperature gauge, oil pressure warning light). If only the SVS light is illuminated and the engine can still start, drive cautiously at controlled speeds and promptly visit a repair shop for diagnostics.

2

Share

Why can't all the windows of the Nissan Teana be raised or lowered?

Nissan Teana windows cannot be raised or lowered for the following reasons: 1. The window lift motor is damaged or the electrical control wiring harness has poor contact: If there is a burnt smell or abnormal noise in the door panel when holding down the window button for a long time, it is very likely that the window lift motor components are damaged. In this case, it is recommended to directly contact a 4S shop or auto repair shop to replace the window lift motor. 2. Motor overheating protection: To protect the power supply circuit, window lift motors generally have an overheating protection mechanism. If the components overheat for some reason, the motor will enter an overheating protection state, causing the window lift to malfunction. 3. Excessive resistance in the glass guide channel: The door glass guide channel is a detail that is easily overlooked. During use, dust accumulates in the glass guide channel, increasing resistance. Over time, this may make it difficult to raise the glass.

4

2

Share

How long is the warranty period for the VV7?

The warranty period for the VV7 is three years or approximately 60,000 kilometers. Below is an introduction to the Great Wall VV7:1. Exterior Design: The WEY-VV7 continues the family's "leopard-inspired bionic" elements while incorporating a swooping streamline body design. It features a redesigned front grille, bumpers, and fog lights, making it more dynamic and enhancing its sensory quality. The overall design of the VV7 is identical to the concept car, adopting a very minimalist design philosophy with a wraparound dashboard and circular air vents.2. VV7 Configuration: The VV7 focuses on comfort and safety. It comes equipped with advanced and tech-savvy features such as forward collision warning radar, lane departure warning system, 360-degree panoramic camera, streaming rearview mirror, hill descent control, auto hold, adaptive cruise control, autonomous emergency braking, genuine leather seats, seat heating, intelligent voice system, full LED lighting, automatic headlights, and air purifier.

15

1

Share

What does TC skeleton oil seal mean?

TC oil seal is a mechanical component used to seal oil (oil is the most common liquid substance in the transmission system, and it also generally refers to liquid substances). It isolates the parts that need lubrication in the transmission components from the output parts, preventing the leakage of lubricating oil. Additional information: 1. Meaning of oil seal: Oil seal (oil-seal) is the customary term for general sealing components, simply put, it is the sealing of lubricating oil. It is a mechanical component used to seal grease (oil is the most common liquid substance in the transmission system, and it also generally refers to liquid substances). It isolates the parts that need lubrication in the transmission components from the output parts, preventing the leakage of lubricating oil. The sealing components used for static sealing and dynamic sealing (generally reciprocating motion) are called oil seals. 2. Representation form: The representative form of oil seal is the TC oil seal, which is a double-lip oil seal with a self-tightening spring completely covered by rubber. Generally, when people refer to oil seals, they often mean this type of TC skeleton oil seal.

11

2

Share

What are the differences between the Roewe ei6 and the Velite 6?

The differences between the Roewe ei6 and the Velite 6 are as follows: 1. Acceleration: The official 0-100km/h acceleration time for the Roewe ei6 is 7.2 seconds, making it faster, while the Velite 6's official 0-100km/h acceleration time is 8.6 seconds, making it slower. 2. Maximum Power: The Roewe ei6 has a maximum power of 124Kw, which is higher, while the Velite 6 has a maximum power of 75Kw, which is lower. 3. Maximum Torque: The Roewe ei6 has a maximum torque of 250N·m, which is higher, while the Velite 6 has a maximum torque of 143N·m, which is lower.

15

1

Share

Where to Find the Engine Number of a Car?

Locating the engine number: The engine number can be found on the outer surface of the engine block, the vehicle's registration certificate, the motor vehicle registration card, the purchase invoice, the factory certificate of compliance, the operating permit for commercial vehicles, the vehicle purchase tax payment certificate, the public security registration record, the vehicle insurance card, the B-pillar nameplate of the motor vehicle, and the actual engine (usually on the engine nameplate). The engine number is like a person's ID number, representing each vehicle and storing crucial information about it. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, industry or company practices, and the engine's attributes. It indicates information such as the manufacturer, specifications, performance, characteristics, technology, purpose, and batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose vehicles are required to display the professional manufacturer's name, model, and production number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, is the production number of the engine, unique to each individual engine. Composition of the engine number: Prefix: Includes product series code, generation symbol, and regional or company code, selected by the manufacturer as needed but must be approved and recorded by the industry standardization unit. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Suffix: Comprises symbols for structural features and usage characteristics. End: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same series, the manufacturer selects an appropriate symbol, which may be separated from the suffix by a hyphen (-).

10

0

Share

Can Coca-Cola Polish Car Headlights?

What does the SVS yellow warning light indicate?

Why can't all the windows of the Nissan Teana be raised or lowered?

How long is the warranty period for the VV7?

What does TC skeleton oil seal mean?

What are the differences between the Roewe ei6 and the Velite 6?

Where to Find the Engine Number of a Car?

What are the situations that require tire replacement?

Do Sedans Need to Be Filled with Water?

Should I use 5w30 or 5w40 engine oil?

How Long Can the Interval Between Subject 3 and Subject 4 Be?