Can China V Vehicles Still Be Purchased Now?

How to Adjust the Seats in the LaCrosse?

To adjust the seats in the LaCrosse: Locate the adjustment buttons on the side of the driver's seat, which include forward/backward, reclining, and height adjustments. For the front passenger seat, there is a black handle beneath the left side of the seat; pull it forward to adjust. The LaCrosse is a midsize 4-door 5-seater sedan with dimensions of 5026mm in length, 1866mm in width, and 1459mm in height, and a wheelbase of 2905mm. It is equipped with a 1.5T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 124 kW and a maximum torque of 250 Nm. The drivetrain is front-wheel drive, with a MacPherson strut independent front suspension and a multi-link independent rear suspension.

13

1

Share

What Causes the Squeaking Sound When Pressing the Brake Pedal?

The squeaking sound when pressing the brake pedal is caused by an incorrect contact angle between the brake pads and the brake disc, or it could be due to the recent replacement of new brake pads. The brake is a mechanical braking device that can slow down the vehicle, also known as a decelerator. The car brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake linkage to be compressed and transmitted to the brake pads on the brake drum, which then clamp the brake disc, slowing down or stopping the vehicle. The manual brake in a car is located next to the gear shift and is connected to the brake lever. Another common type is the bicycle brake, which slows down the bike through rod-shaped brakes fixed on the frame or disc caliper brakes.

8

2

Share

What is the method for removing the rear seats of the Corolla Hybrid?

The method for removing the rear seats of the Corolla Hybrid is: 1. Remove the clips on both sides of the rear seats; 2. Pull the seat outward to separate the hooks at the bottom of the seat from the chassis; 3. Lift the seat upward to complete the removal. The Corolla Hybrid has a length of 4635mm, width of 1775mm, height of 1470mm, and a wheelbase of 2700mm. This vehicle is equipped with a 1.8L naturally aspirated engine, with a maximum power of 73kW and a maximum torque of 142Nm, paired with an electronic continuously variable transmission. The front suspension uses a MacPherson strut independent suspension, while the rear suspension uses a torsion beam non-independent suspension.

17

2

Share

Which One is the Accelerator and Which One is the Brake in an Automatic Transmission Car?

In an automatic transmission car, the right pedal is the accelerator and the left pedal is the brake. Automatic transmission generally refers to the car's automatic gear shifting mechanism, where the control system of the automatic transmission automatically selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment and gear shifting operations. A typical automatic transmission car has six gear positions, from top to bottom: P, R, N, D, S, L. The accelerator, also known as the throttle, is the control device that regulates the engine's power (thrust). The brake is the mechanical braking device that can slow down the car, also known as the decelerator. Pressing the brake pedal causes the brake lever to be pressurized and transmitted to the brake shoes on the brake drum, clamping the brake disc.

18

3

Share

What is the equivalent of a 1.4t engine to a naturally aspirated engine?

1.4t engine power is equivalent to a 1.4-liter naturally aspirated engine, with an additional turbocharging device. The cast iron cylinder block is used, while the EA211 1.4t turbocharged engine features an aluminum alloy cylinder block. The TSI engine utilizes turbocharging, direct fuel injection, and an AVS system to achieve cylinder deactivation. The AVS system changes the valve lift and timing under different operating conditions by switching between two cams with different angles. For a 1.4t engine, it is recommended to start slowly and accelerate gently. After starting a turbocharged engine vehicle, avoid pressing the accelerator pedal abruptly. Instead, let the engine idle for 3 to 5 minutes, allowing the oil pump sufficient time to deliver oil to all parts of the turbocharger. Meanwhile, as the oil temperature gradually rises, its fluidity improves, ensuring the turbocharger is fully lubricated.

20

2

Share

What brand of tires does the Roewe RX5 use?

The Roewe RX5 uses Michelin brand tires. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining the vehicle's driving performance. The Roewe RX5 is a compact SUV with dimensions of 4556mm in length, 1855mm in width, and 1719mm in height, and a wheelbase of 2700mm. This vehicle is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, a maximum torque of 250Nm, and a maximum power of 124kW, paired with a 6-speed manual transmission.

15

3

Share

Can China V Vehicles Still Be Purchased Now?

How to Adjust the Seats in the LaCrosse?

What Causes the Squeaking Sound When Pressing the Brake Pedal?

What is the method for removing the rear seats of the Corolla Hybrid?

Which One is the Accelerator and Which One is the Brake in an Automatic Transmission Car?

What is the equivalent of a 1.4t engine to a naturally aspirated engine?

What brand of tires does the Roewe RX5 use?

What is the function of a car igniter?

How to remove the small wrench icon on the Chery Arrizo 5 dashboard?

What brand is the ES car?

What is the difference between 10w30 and 10w40?