Can China III Vehicles Still Pass Annual Inspection?

What are the reasons for the Haval H6 air conditioning not cooling?

Haval H6 air conditioning not cooling reasons are as follows: Lack of refrigerant: Even if the air conditioning system is tightly sealed, refrigerant loss can still occur, especially if there are minor leaks in the air conditioning pipes or condenser, leading to insufficient cooling. Dirty condenser: The main purpose of cleaning the radiator and condenser is to dissipate heat. If debris accumulates on the condenser, it can cause the engine temperature to rise too high or the air conditioning to not cool properly. Damaged air conditioning compressor or expansion valve: Faults in the expansion valve or throttle valve directly result in the air conditioning not cooling, requiring professional repair at a service center. Aged or loose belt: If the air conditioning belt slips during use, it can lead to belt breakage, belt noise, loss of power assistance, and the air conditioning not cooling.

5

3

Share

Can Vehicle Annual Inspection Be Processed in Another Location?

Vehicle annual inspection can be processed in another location. Currently, cross-provincial inspection for small cars, trucks, and medium-sized buses has been fully implemented. Applicants can directly have their vehicles inspected in provinces other than where the vehicle is registered and obtain the inspection qualification mark without going through the entrusted inspection procedure. Vehicle annual inspection, also known as vehicle inspection, refers to an annual inspection conducted according to the safety technical conditions for motor vehicle operation for vehicles that have already obtained formal license plates and registration certificates. It includes a comprehensive inspection of components such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation, aiming to encourage enhanced vehicle maintenance and ensure that the vehicle remains in good condition, thereby guaranteeing driving safety.

13

5

Share

What Causes an Air Pump to Make Noise Without Pumping Air?

The reasons why an air pump fails to pump air are as follows: Motor Phase Loss: Motor phase loss prevents the motor from delivering its rated power, thereby limiting the maximum output pressure of the air pump (as the air pump pressure increases, the motor load gradually increases, and power consumption rises accordingly). In this case, you can inspect the electrical circuit. Damaged Air Pump Seal: Especially when the piston head seal is damaged, it causes air leakage between the high and low-pressure chambers. Most common air pumps are piston-type, similar in structure to hydraulic cylinders. The piston head is equipped with seals, which over time can fail due to normal wear and tear or aging, allowing air to bypass between the high and low-pressure chambers and preventing pressure buildup. In this scenario, the air pump compressor needs to be disassembled, and the seals must be replaced. This is the most likely cause of the air pump's inability to build pressure. Pressure Relief Valve Set Too Low: For safety reasons, a pressure relief valve is installed at the output port to prevent dangerously high pressure that could lead to explosions. If this valve is set too low, the air pump will automatically shut down whenever the pressure reaches the limit, resulting in an apparent inability to build pressure. However, the air pump itself continues to operate normally under these conditions.

14

1

Share

Which Country Does Roewe Belong To?

Roewe is manufactured in China. Here is some relevant information: Introduction to Roewe: Roewe is a Chinese-produced automobile brand under the Shanghai Automotive Industry Corporation (Group). Its automotive technology originates from Rover, which was previously acquired by SAIC, but it is an independent brand. Since its establishment, the brand has developed rapidly, and its products now cover the mid-size and upper-mid-size car markets. Introduction to Roewe Models: Taking the Roewe RX5 as an example: it is a compact SUV launched by SAIC Motor, with a length, width, and height of 4571mm, 1855mm, and 1719mm respectively, and a wheelbase of 2708mm. It is equipped with a 1.5-liter turbocharged engine, with a maximum power output of 127kW, and is paired with either a 7-speed dual-clutch or a 6-speed manual transmission.

16

1

Share

What should be paid attention to when driving at night?

When driving at night, you should pay attention to the following: 1. When the distance to the oncoming vehicle is 150 meters, you should switch from high beam to low beam; 2. When driving at night, if the speed is below 30 kilometers per hour, you should use low beam, and under normal circumstances, the light can illuminate more than 30 meters; 3. Be cautious of intersections often encountered during night driving. You can predict the driving situation of the oncoming vehicle based on the light from the side road; 4. Remember to maintain a safe distance when following a vehicle at night. During night driving, be mindful of road obstacles and construction signal lights. When driving through dark areas or where the road condition is not easily discernible, you must slow down.

16

0

Share

What to Do When the Steering Wheel Pulls to One Side?

Solutions for steering wheel pull: 1. With normal tire pressure, first check if the tire wear is even, then inspect components such as the lower control arm, ball joint, and CV joint for any abnormalities. If everything appears normal, proceed with a wheel alignment and make corresponding adjustments as needed. 2. Adjust the tie rod—when one side is longer than the other, it can cause the car to pull toward the longer side. 3. If the front shock absorber springs are deformed, causing inconsistent damping on both sides, this can also lead to pulling. You can press down or remove and compare them to assess their condition. 4. If the front shock absorbers fail, uneven suspension height during driving can create imbalanced forces, resulting in pulling. Use a specialized tester to measure the shock absorbers' absorption rate or, if testing equipment is unavailable, assess their condition by performing a stretch test after removal.

10

1

Share

Can China III Vehicles Still Pass Annual Inspection?

What are the reasons for the Haval H6 air conditioning not cooling?

Can Vehicle Annual Inspection Be Processed in Another Location?

What Causes an Air Pump to Make Noise Without Pumping Air?

Which Country Does Roewe Belong To?

What should be paid attention to when driving at night?

What to Do When the Steering Wheel Pulls to One Side?

What are the commonly used car accessories?

What is the difference between L gear and S gear?

What is the fuel consumption of the Jeep Renegade?

What is the difference between V12 and W12 engines?