Can Car Seats Be Replaced?

Can I drive an automatic transmission car with a C1 driver's license?

You can drive an automatic transmission car with a C1 driver's license. Permitted vehicle types: The C1 driver's license allows driving small and micro passenger cars, light and micro trucks, as well as light, small, and micro special-purpose vehicles. Small passenger cars must have a seating capacity of 9 or fewer. Vehicles not permitted with a C1 license: large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters. Age requirements: The minimum age to apply for a C1 driver's license is 18, with no upper age limit. However, applicants over 70 years old must pass tests for memory, judgment, and reaction abilities.

17

3

Share

How to Determine Liability in a Three-Car Rear-End Collision?

In determining liability for a three-car rear-end collision, the traffic police department must conduct an on-site investigation to make a comprehensive judgment: If the third car hits the second car, causing the second car to hit the first car, then the third car bears full responsibility. The principles for liability division in rear-end collisions are as follows: Rear car hits the front car in motion: In such a rear-end collision, the rear car bears full responsibility; Front car reverses or rolls back and hits the rear car: In such a rear-end collision, the front car bears full responsibility; Front car stops on the road without complying with regulations: If the front car fails to turn on the hazard warning lights and set up warning signs as required, resulting in a rear-end collision, the front car bears secondary liability, while the rear car bears primary liability; Front car stops on the road in compliance with regulations: If the front car turns on the hazard warning lights and sets up warning signs as required, resulting in a rear-end collision, the rear car bears full responsibility; Front car is overlength: If the front car does not set up obvious warning signs as required, resulting in a rear-end collision, the front car bears secondary liability, while the rear car bears primary liability; Front car lacks taillights at night: In such a rear-end collision, the front car bears secondary liability, while the rear car bears primary liability.

16

2

Share

What are the evaluation criteria and requirements for Subject 3?

Failure to walk around the vehicle to inspect its appearance and surrounding environment will result in disqualification. Failure to walk around the vehicle to inspect its appearance and surrounding environment will result in disqualification, etc. Below is a detailed introduction to the Subject 2 examination: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. The test items for small cars C1 and C2 include five mandatory components: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. 2. Others: If the first attempt at Subject 2 is unsuccessful, a retake is allowed. If the retake is not attended or is still unsuccessful, the examination will be terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skills test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests must not exceed five.

6

4

Share

What Does Vehicle Model Number Mean?

Vehicle model number is a tool for identifying a specific type of vehicle. Its structure is divided into three parts: beginning, middle, and end. The beginning represents the manufacturer, the middle represents the vehicle type code, main parameters, and product serial number, while the end represents the enterprise-defined code. Unlike an ID card that identifies individuals uniquely, it has the characteristic of uniformly defining the same type of vehicles. Below is the detailed introduction: Beginning - Enterprise Code: The enterprise code is generally the initials of the Chinese pinyin, represented by two or three letters. For example, SGM stands for Shanghai General Motors, CA represents FAW, EQ represents Dongfeng (Second Automobile Works), BJ represents Beijing, etc., reflecting the manufacturer or brand. Middle - Category Parameters: The first Arabic numeral in the middle part represents the vehicle type: 1 for trucks, 2 for off-road vehicles, 3 for dump trucks, 4 for tractors, 5 for special vehicles, 6 for buses, 7 for cars, and 9 for semi-trailers. Main parameters include car engine displacement, bus length, truck gross weight, etc. End - Custom Code: The end part mainly consists of letters and Arabic numerals, generally used by enterprises to distinguish their own developed products. For example, BMW has Series 1, Series 2, Series 3, A-Class, B-Class, C-Class, etc. It should be noted that the letters 'i', 'o', and 'q' are not allowed in vehicle model numbers as they can easily be confused with other numbers, making precise identification difficult.

10

1

Share

What are the penalties for exceeding exhaust emission standards on the road?

If a vehicle owner is notified of excessive exhaust emissions during an on-road test, they may face fines from traffic police. According to Article 90 of the "Road Traffic Safety Law of the People's Republic of China": Drivers who violate road traffic safety laws and regulations regarding road usage shall be given a warning or fined. 1. Failing exhaust emission standards: Traffic police will first require the vehicle owner to rectify the issue within a specified period and have the vehicle re-inspected by environmental protection authorities within 15 days. If the owner fails to comply with the rectification notice and undergo re-inspection, they will be fined. 2. Causes of excessive vehicle emissions: The primary reason is the use of substandard fuel quality. Malfunctions in components such as the three-way catalytic converter or oxygen sensor can also lead to non-compliant vehicle emissions. After failing an emissions test, owners can visit repair shops to check whether the issue is caused by fuel or component failures.

11

4

Share

How Often Should the Coolant in the Spirior Be Replaced?

The coolant in the Spirior should be replaced every two years or 40,000 kilometers. Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, overheating in summer, and year-round protection against scale and corrosion. The Spirior pioneered the "high-end sporty" design concept and is equipped with numerous world-class high-end technologies. In terms of body dimensions, the Spirior measures 4840mm in length, 1850mm in width, and 1465mm in height, with a wheelbase of 2780mm. The Spirior comes standard with chrome-plated dual exhaust pipes, featuring a sporty bilateral single-outlet design that enhances the vehicle's overall premium feel.

17

5

Share

Can Car Seats Be Replaced?

Can I drive an automatic transmission car with a C1 driver's license?

How to Determine Liability in a Three-Car Rear-End Collision?

What are the evaluation criteria and requirements for Subject 3?

What Does Vehicle Model Number Mean?

What are the penalties for exceeding exhaust emission standards on the road?

How Often Should the Coolant in the Spirior Be Replaced?

What are the reasons for tires being extremely hot to the touch?

Can You Press the Clutch When Going Downhill in a Manual Transmission Car?

What are the motor vehicle inspection regulations?

Can a cracked rear car bumper be repaired?