Can car glass scratches be repaired?

1 Answers
HaileyRose
07/29/25 10:42am
There are two types of car glass scratches: repairable scratches and non-repairable scratches. The details are as follows: 1. Small and shallow scratches can be removed by grinding and polishing: Scratches on the glass can be removed by grinding and polishing, but this is only applicable to small and shallow scratches, preferably not in the main line of sight, as grinding causes wear to the glass, and large areas may affect visibility. 2. Large or long cracks require direct glass replacement: For dents on the glass, specialized glass repair agents can be used for filling and repair. For those with large or long cracks, repair is not recommended as the effect is limited, and direct replacement of the glass is advised.
Was this review help?
15
4
Share
More Forum Discussions

Why Does the Tire Pressure Monitoring Display Turn Yellow?

Tire pressure abnormalities can cause the tire pressure monitoring display to turn yellow. Tire Pressure Monitoring: Tire pressure monitoring is mainly divided into two types: indirect tire pressure monitoring (Wheel-Speed Based TPMS, abbreviated as WSB) and direct tire pressure monitoring (Pressure-Sensor Based TPMS, abbreviated as PSB). When the tire pressure is too high, it reduces the contact area between the tire and the ground, while the pressure the tire bears increases relatively, affecting the tire's grip. Importance of Tire Pressure Monitoring: Data shows that tire blowouts account for a very high proportion of severe traffic accidents, and among all factors that can cause blowouts, insufficient tire pressure is the primary cause. This is not an exaggeration. Even if you do not choose a vehicle equipped with tire pressure monitoring, it is essential to pay attention to your vehicle's tires to avoid serious harm to both people and the vehicle. When the tire pressure is too high, it reduces the contact area between the tire and the ground, while the pressure the tire bears increases relatively, affecting the tire's grip. Additionally, when the vehicle passes over bumps or uneven roads, the tire lacks sufficient space to absorb vibrations, which not only affects driving stability and ride comfort but also increases the impact on the suspension system, leading to potential hazards. At the same time, the risk of blowouts increases correspondingly in high temperatures.
16
0
Share

What is the Minimum Speed Limit Sign?

The minimum speed limit sign indicates the minimum speed restriction for motor vehicles entering the road ahead. This sign is placed at the starting point of expressways or other speed-limited road sections. It specifies that under good road conditions ahead, motor vehicles must maintain a minimum speed of no less than 50 km/h. The sign is installed at appropriate locations including the starting points of expressways or other speed-limited road sections and after various interchange intersections. Below are detailed explanations about the minimum speed limit sign: 1. Meaning: Road traffic signs are facilities that convey specific information through graphic symbols, colors, and text to manage traffic. They play a crucial role in ensuring smooth traffic flow and driving safety, thus must be observed by all drivers and traffic participants. Traffic safety slogans can enhance drivers' and traffic participants' awareness of voluntarily complying with traffic regulations, which is significant for building a safe and smooth traffic environment. 2. Current Situation: In China, speed limit signs are primarily set based on segmented road sections. For general road sections with good alignment, speed limits are determined according to operating speeds; while for other sections, they are set based on traffic conditions or road accident statistics.
7
3
Share

What is the wading standard for the Regal?

The Regal's exhaust pipe has a ground clearance of 30.5 cm, and the half-height of its wheels is 32.5 cm. The half-height of the wheels is a conservative safe wading depth. At this water level, there is a possibility of water entering the exhaust pipe, but it won't cause the engine to stall, so you can safely pass through. Below is relevant information: Wading driving: Always drive at a low speed. For manual transmission vehicles, depending on the water depth, it is recommended to use second or third gear. In cases of deep water and heavy traffic, use first gear. Wading limit: The vehicle's air intake is located behind the grille, with the opening facing forward. The air filter is positioned about 5 cm above the air intake, so even if some water enters the intake, it won't reach the air filter. The Regal's air intake has a ground clearance of 61 cm, which is its wading limit. This is roughly equivalent to five-sixths of the wheel height, or the top of the wheel hub. When the water level reaches this point, although there is still about 5 cm to the air filter, it already prevents the engine from breathing normally. Therefore, when the water level reaches the upper seam between the wheel hub and tire, you should not continue wading.
20
0
Share

What suspension does the Volvo S80L use?

Volvo S80L uses MacPherson independent suspension for the front suspension and multi-link independent suspension for the rear suspension. The MacPherson suspension has only one L-shaped control arm, which does not occupy engine compartment space; the multi-link independent suspension is an improvement based on the double-wishbone suspension, replacing the two wishbones of the double-wishbone suspension with separate links. MacPherson suspension is an independent suspension, meaning there is no connection between the two wheels on the same axle, thus eliminating any motion interference. Multi-link suspension can improve the tire's ground contact performance, enhancing grip and thereby improving the vehicle's handling.
8
4
Share

Reasons for Car AC Not Cooling at Low Speeds

Car AC not cooling at low speeds is caused by insufficient pressure. Reason 1: Insufficient Freon: When the car is idling, especially when stopping at traffic lights or in traffic jams (lacking the cooling effect from driving wind speed), the low engine speed causes the compressor speed to also decrease. With insufficient Freon, its instant pressurization cannot reach the standard state, resulting in excessively low high pressure and suboptimal cooling performance. This can be resolved by adding some Freon, but it is important to use high-purity, environmentally friendly Freon. Reason 2: Compressor Pressure Leakage: This directly leads to severely low pressure at idle speed. In this case, the compressor needs to be replaced, which can be a significant expense. Reason 3: AC Cooling Fan Not Working: When the car is stationary, poor heat dissipation (lacking the cooling wind speed from driving) causes the pressure to become excessively high. The high-pressure sensor then forces the compressor to stop working, resulting in no cold air. In this situation, check the fuse, relay, and the fan itself to identify the faulty component and replace it. Reason 4: Expansion Valve Orifice Too Large: At idle speed, the low pressure becomes too high, significantly reducing the AC's cooling effect. This requires replacing the expansion valve and completely refilling the system with Freon.
1
3
Share

How to Identify a Car Engine Model?

Here is a detailed introduction to engine models: 1. Generally includes: number of cylinders, bore diameter, inline or V-shaped arrangement. Front part: Product series symbol and generation indicator symbol, represented by letters chosen by the manufacturer as needed, but must be approved by the relevant authority. 2. Middle part: Composed of symbols for the number of cylinders, stroke, cylinder arrangement, and bore diameter. 3. Rear part: Structural and usage characteristic symbols, represented by letters. 4. Tail part: Distinguishing symbols. L4 = Inline 4-cylinder. V6 = V-type 6-cylinder (3 cylinders per side in one row, arranged in two rows in a V shape). V8 = V-type 8-cylinder (4 cylinders per side in one row, arranged in two rows in a V shape). W12 = W-type 12-cylinder (4 cylinders per group in one row, arranged in four rows in a W shape; generally used in sports cars). For example, the 4102 engine indicates 4 cylinders in line with a bore diameter of 102 mm. 5. Usually, the manufacturer's self-assigned code is added at the front, and a Q or other letter is added at the end to indicate whether it is for automotive, marine, power generation, etc.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.