Can car glass be polished?

2 Answers
McAdriana
07/24/25 6:13am
Car glass can be polished. Polishing can repair minor damages on the glass and also remove oil film. Here are the relevant details: 1. Polishing can gradually refine imperfections such as scratches, cuts, burns, and corrosion on the glass surface, thereby achieving a repair effect. For some scratches, grinding treatment is needed first, followed by polishing for better results. 2. Toothpaste has a certain polishing effect, but it must be chosen carefully. Select toothpaste containing fine abrasive particles, apply it to the glass, and use a soft, clean towel dipped in water to wipe. This method has a certain grinding and polishing effect, which can repair some minor scratches and effectively remove oil film.
Was this review help?
1
2
Share
SanMax
08/11/25 2:00am
Vehicle glass can indeed be polished to address minor scratches or stains, which is quite common in the auto repair field. For example, those wiper marks or small scratches on the windshield can be smoothed out and restored to clarity through professional polishing. Typically, a polishing machine and specialized polishing paste are used, but the pressure must be controlled to avoid weakening the glass strength or damaging the UV coating, which could backfire. I recommend leaving it to experienced auto shops, as they have the right tools and methods to ensure safety. Regular cleaning of the glass while driving is also advised, as accumulated dirt becomes harder to remove over time and can impair visibility and safety.
Was this review help?
4
3
Share
Expand All
More Forum Discussions

What are the differences between the 2021 BMW X3 facelift and non-facelift models?

2021 BMW X3 facelift and non-facelift models have the following differences: 1. Configuration: The 2021 BMW X3 is equipped with an adaptive cruise control system; the 2020 model does not have this feature. 2. Automatic parking system: The automatic parking system is not standard on the 2021 model, while it is standard on the 2020 model. 3. 11-color ambient lighting: The 2021 model comes standard with 11-color ambient lighting, which was an optional feature on the 2020 model. 4. Infotainment system: The 2021 model's infotainment system supports both CarPlay and CarLife systems, whereas the 2020 model only supports CarPlay.
7
4
Share

How to Check the Required Tire Pressure from the Tire?

From the side of the tire, you can see the required inflation pressure, which is located on both sides of the outer tire. The methods to check the car tire pressure index are: 1. Vehicle user manual; 2. Label near the B-pillar of the driver's door; 3. Drawer next to the driver's seat; 4. Fuel tank cap door. The standard tire pressure for car tires is: 1. Standard tires: 2.4 to 2.5 bar; 2. Reinforced tires: 2.8 to 2.9 bar; 3. Maximum pressure: should not exceed 3.5 bar. The methods to detect tire pressure are: 1. Direct tire pressure monitoring; 2. Indirect tire pressure monitoring; 3. Tire intelligent monitoring system.
6
3
Share

What does an exclamation mark inside a bracket indicate as a warning light?

An exclamation mark inside a bracket is the brake system warning light, indicating a malfunction in the braking system that requires immediate inspection and repair. The automotive braking system refers to a series of specialized devices that apply a certain force to specific parts of the vehicle to enforce braking. Reasons for the illumination of the brake system warning light include: 1. Severe wear of brake pads; 2. Low brake fluid level; 3. Abnormalities in the braking system; 4. Failure of the parking brake. The functions of the automotive braking system are: 1. Ensuring the vehicle decelerates or stops as required by the driver; 2. Ensuring the vehicle is reliably parked; 3. Safeguarding the safety of the vehicle and the driver.
19
1
Share

When should the Touran L have its engine oil changed?

The engine oil replacement cycle for the Touran L is every 5,000 kilometers or three months. These two maintenance indicators should be determined based on the vehicle's usage conditions, whichever comes first. Since the Touran is equipped with a turbocharged engine, it is recommended to use 5W-30 full synthetic oil, which provides relatively better performance and a longer oil change interval. The method for changing the engine oil is as follows: 1. Run the engine until it reaches operating temperature. Then use a jack to lift the vehicle, engage the handbrake, and secure the front wheels with wooden wedges. 2. Place an old oil container under the oil pan, locate the oil pan drain plug, and slowly loosen it, being careful not to come into contact with the hot oil. Allow the oil to drain for a while. Inspect the drain plug, then reinstall it, ensuring not to overtighten it to avoid damaging the oil pan. 3. Move the oil container under the oil filter, use an oil filter wrench to loosen the filter, and remove it by hand. 4. Apply new oil to the gasket of the new filter. 5. Pour the new oil into the oil pan. A funnel can be used to prevent spilling oil on the engine exterior. Check for leaks under the engine. If there are no leaks, lower the vehicle, check the oil dipstick, and start the engine. After starting, the indicator light on the dashboard should turn off immediately. Finally, turn off the engine and recheck the oil level to complete the process.
1
5
Share

What does the dashboard message 'Check Emission System' mean?

The dashboard displaying 'Check Emission System' indicates a fault in the exhaust system that requires inspection. Causes of emission system failure include: 1. Excessive spark plug gap; 2. Incorrect resistance value in distributor wires; 3. Malfunction of oxygen sensor or carbon canister solenoid valve; 4. Excessive carbon buildup in the throttle or engine interior. Hazards of emission system failure are: 1. Leads to excessive carbon accumulation; 2. Compromises driving safety and reduces engine lifespan; 3. Causes engine overheating, leading to sintering or detachment of the catalytic converter substrate and increased exhaust resistance; 4. Exceeds harmful emission standards.
9
4
Share

What needs to be done for the third vehicle maintenance?

For the third vehicle maintenance, the following items need to be performed: 1. Replacement of engine oil and oil filter; 2. Check whether the oil filter element, air filter element, fuel filter element, cabin air filter element, and transmission oil filter element need replacement; 3. Top up windshield washer fluid, coolant, and air conditioning refrigerant if insufficient; 4. Inspect the drive belt for wear; 5. Clean throttle valve and cylinder carbon deposits; 6. Check for any damage to the chassis; 7. Inspect the vehicle body and tires. The benefits of vehicle maintenance include: 1. Ensuring optimal vehicle performance; 2. Enhancing driving safety; 3. Reducing engine noise; 4. Extending the vehicle's service life.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.