Can Car Bluetooth Be Set to Not Answer Calls?

1 Answers
McLorenzo
07/29/25 11:41am
Car Bluetooth can be set to not answer calls. Here is relevant information about car Bluetooth: 1. Functions of car Bluetooth: Car Bluetooth is an in-vehicle wireless hands-free system designed based on wireless Bluetooth technology. Its main function is to connect with mobile phones via Bluetooth technology for hands-free calls during normal driving, freeing both hands and reducing traffic accident risks. 2. Applications of car Bluetooth: The first domestic brand in China to apply Bluetooth technology was a sedan equipped with a Bluetooth car hands-free system, which allows drivers to answer or make calls without touching the phone, thereby improving driving safety. When a call comes in, the sound system of the "Hafei Saibao" automatically switches to mute, and the driver can hear the caller's voice through the car's speakers. The driver's voice is transmitted through the in-car microphone, and a small control keyboard installed in the center of the dashboard is used to answer or make calls.
Was this review help?
18
4
Share
More Forum Discussions

What is the tire pressure for the 2019 Buick Excelle?

The tire pressure for the 2019 Buick Excelle is 240 kPa, as indicated on the tire pressure label located on the front door frame on the driver's side, which specifies the original tires and corresponding tire pressure. It is important to note that this tire pressure refers to cold tire pressure. The Excelle comes equipped with a tire pressure monitoring system, allowing the owner to check the tire pressure in real time. The 2019 Buick Excelle has dimensions of 4587 mm in length, 1798 mm in width, and 1463 mm in height, with a wheelbase of 2640 mm and a minimum ground clearance of 138 mm. The 2019 Buick Excelle is powered by a 1.0T dual-injection turbocharged engine, delivering a maximum power of 92 kW at 5600 rpm and a maximum torque of 170 Nm between 2000 and 3600 rpm.
2
2
Share

How to Adjust Rearview Mirrors?

Rearview mirror adjustment steps: 1. Locate the electric adjustment button on the driver's left door, where L represents the left rearview mirror and R represents the right rearview mirror; 2. To adjust the angle of the left rearview mirror, rotate the adjustment knob's white dot to the L position; 3. Lift the knob upwards to change the mirror's viewing angle upwards, press the knob downwards to change the mirror's viewing angle downwards, and move the knob left or right using the same method; 4. To adjust the angle of the right rearview mirror, rotate the adjustment knob's white dot to the R position; 5. Lift the knob upwards to change the mirror's viewing angle upwards, press the knob downwards to change the mirror's viewing angle downwards, and move the knob left or right using the same method; 6. After adjustment, rotate the knob's white dot to the O position.
16
5
Share

How long is the grace period for compulsory insurance expiration?

Compulsory insurance can be deferred for up to 3 months for payment. As long as it is within these 3 months, the original auto insurance company can still accept renewal. However, according to regulations, vehicles without compulsory insurance are not allowed on the road. Vehicle compulsory insurance is the first compulsory insurance system implemented by national law in China. The Regulations on Compulsory Insurance for Motor Vehicle Traffic Accident Liability stipulate that compulsory insurance is a mandatory liability insurance where the insurance company compensates the victim (excluding the vehicle occupants and the insured) for personal injury, death, or property loss caused by a road traffic accident involving the insured motor vehicle, within the liability limit. If the owner or manager of a motor vehicle fails to purchase compulsory vehicle insurance as required and is discovered by the public security traffic management department, the department may impose a fine of twice the minimum liability limit premium that the vehicle should have paid. Since compulsory insurance, in a sense, represents state intervention in personal will, the scope of compulsory insurance is strictly limited.
4
3
Share

Where does the Ya-Ye Expressway run from and to?

The Ya-Ye Expressway runs from Ya'an in Sichuan Province to Yecheng in Xinjiang. It is one of the east-west horizontal routes in China's national expressway network and is classified as a long-term prospective route. The expressway primarily passes through the following regions: Ya'an, Tianquan, Luding, Kangding, Litang, Markam, Baxoi, Nyingchi, Lhasa, Shigatse, Gar, and Yecheng, spanning three provincial-level administrative regions: Sichuan Province, Tibet Autonomous Region, and Xinjiang Uygur Autonomous Region. The Ya-Ye Expressway serves as a vital corridor connecting the Chengdu Plain with the Ganzi Tibetan area and further extending to Tibet. After its opening, the travel time from Chengdu to Kangding was reduced to just three and a half hours, nearly half the previous duration. To prevent driver fatigue during prolonged tunnel driving, the Ya-Kang Expressway section implements alarm sirens in the Erlangshan Tunnel and Laba River Tunnel Group during key daily periods (12:00-14:00 and 1:00-5:00 AM) to forcibly enhance driver alertness.
5
3
Share

What does MacPherson independent suspension mean?

The suspension system refers to a connecting structural system between the body, frame, and wheels. The MacPherson independent suspension is one type of suspension system, mainly consisting of components such as shock absorbers, suspension springs, lower control arms, longitudinal rods, steering knuckle arms, rubber bushings, and connecting rods. The primary structure of the MacPherson independent suspension is formed by a coil spring mounted over the shock absorber. The shock absorber prevents the coil spring from shifting forward, backward, left, or right when under force, restricting the spring to only vertical vibrations. Additionally, the length and tightness of the shock absorber's stroke can be adjusted to set the suspension's stiffness and performance.
6
3
Share

What does Anti-lock Braking System mean?

Anti-lock Braking System refers to automatically controlling the braking force during vehicle braking to prevent wheel lock-up, maintaining a state of rolling and sliding (with a slip ratio of about 20%), ensuring maximum adhesion between the wheels and the road surface. The abbreviation for Anti-lock Braking System is ABS. The anti-lock braking system can improve the safety factor of emergency braking while driving. Vehicles without an anti-lock braking system are prone to wheel lock-up when emergency braking is applied in critical situations, making the steering wheel non-responsive, thereby increasing the risk factor and potentially leading to severe consequences.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.