Can Car Antifreeze Be Mixed?

1 Answers
DeErin
07/29/25 1:51pm
Cars' antifreeze cannot be mixed. Different brands and models have different products, and you should choose the appropriate antifreeze from reputable brands based on your vehicle model. Using inferior antifreeze can cause the engine temperature to rise and corrode the engine. In winter, it is necessary to check the antifreeze level, ensuring it is adequate. If the concentration of antifreeze in the engine coolant is too low, the engine water may freeze, causing the vehicle to fail to start in the morning. The full name of antifreeze is antifreeze coolant. The main functions of antifreeze are: in winter when temperatures are low, it prevents the coolant from freezing and expanding, which could crack the radiator or damage the engine cylinder block or head; in summer when temperatures are high, it effectively prevents boiling, avoiding overheating issues.
Was this review help?
12
2
Share
More Forum Discussions

How to Troubleshoot High Rail Pressure in Electronic Fuel Injection Diesel Vehicles?

Check the fuel discharge during ignition. If no fuel is discharged, consider a potential fuel pump malfunction. If fuel is discharged, use a high-pressure tool to measure the fuel discharge pressure. Inspect whether the fuel tank is clean and free of foreign objects, and check if the vent hole is blocked. Examine the entire fuel line for any bends and ensure all connections are sealed and airtight. Loosen the fuel pump return line, start the engine, and observe if the issue resolves. If the issue disappears, it indicates a blocked fuel pump return line. If the issue persists, inspect the high-pressure fuel pump itself.
8
1
Share

Can Lamborghini Not Use 92 Octane Gasoline?

Lamborghini cannot use 92 octane gasoline. The Aventador requires 98 octane gasoline, while the Urus and Huracán need 95 octane gasoline. If the engine is filled with lower octane fuel, the engine's operating condition is likely to be affected to some extent, making it difficult to control the fuel combustion rhythm. In mild cases, this may result in reduced engine power, increased fuel consumption, and louder engine noise. In severe cases, it may cause engine knocking, and damage internal engine components as well as spark plugs. If the engine is filled with higher octane fuel, no significant issues will arise during use. At most, incomplete combustion may occur, potentially leading to carbon buildup in the engine during operation.
20
2
Share

What is the range of the BYD Han Emperor?

BYD Han Emperor has a battery range of 605km. Range: Range can also be referred to as endurance capability, which indicates the total distance that vehicles like cars or ships can travel continuously with maximum fuel reserves. For electric vehicles, the range refers to the distance traveled from a fully charged state of the power battery until the end of the test under standard conditions. It is an important economic indicator for electric vehicles. New energy vehicle range: Refers to the distance traveled at a constant speed under ideal road conditions, wind speed, temperature, etc., on a single full charge. Hybrid vehicles and lead-acid battery vehicles (low-speed vehicles) generally have relatively shorter ranges.
7
2
Share

What Causes the Engine Not to Turn Over During Startup?

There are several reasons why the engine does not turn over during startup: 1. Fuel supply system issues: Blockage in the low-pressure fuel line, loose or leaking fuel lines, air in the high-pressure fuel line, poor technical condition of the fuel injectors, incorrect fuel injection timing. 2. Starting system issues: Power supply failure, poor contact in the electromagnetic switch, poor contact between the starter motor commutator and brushes, clutch slippage in the starter transmission mechanism. 3. Insufficient cylinder compression pressure: Leakage due to damaged cylinder gasket, leakage due to improperly sealed valves, leakage due to worn piston and cylinder liners. 4. Insufficient air intake: Clogged air filter element.
1
5
Share

How to Remove a Broken Spark Plug?

Methods for removing a broken spark plug: 1. Use welding to attach a thin, long iron bolt to the broken spark plug head, then remove the broken spark plug; 2. Use a specialized reverse-thread tool designed for removing broken spark plugs to tap threads inside the broken spark plug head, then turn the tool to extract the broken piece. Fine metal shavings may fall into the cylinder during the threading process, so after removing the broken piece, use a magnetic rod to clean them up as thoroughly as possible. The spark plug is part of the ignition system, and its main function is to introduce the high voltage electricity generated by the ignition coil into the engine, then generate a spark between the electrodes to ignite the air-fuel mixture, allowing the engine to operate normally.
10
0
Share

What brand is represented by two M's?

The logo with two M's represents the Maybach automobile. Introduction to Maybach: Maybach is an automobile brand. Maybach and Maybach-Motorenbau GmbH were a German ultra-luxury car brand and manufacturer active in Europe between 1921 and 1940. Maybach is a brand full of legend in automotive history, with its ingenious design and unparalleled craftsmanship making it a masterpiece representing the pinnacle of German automotive industry in the early last century. Maybach's Exterior: The headlight design of the Maybach Landaulet is seamlessly integrated into the overall contour of the body. The Maybach logo is cleverly pre-embedded on the lens of the headlight, incorporating the brand's value into the details of the product.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.