Can Body Reinforcement Bars Improve Body Rigidity?

1 Answers
DelArcher
07/25/25 3:13pm
Body reinforcement bars can indeed improve body rigidity, and this device can also enhance the vehicle's handling. The better the rigidity of a car's body, the better its handling performance. Many performance-oriented vehicles place great emphasis on body rigidity. If a car's body rigidity is excellent, the dynamic response of the body will be synchronized with the driver's inputs. Recommendations for installing body reinforcement bars: If you wish to install body reinforcement bars, you can purchase them and have them installed by a professional shop. When purchasing body reinforcement bars, it is important to ensure that you buy the model specifically designed for your vehicle, otherwise installation will not be possible. Some vehicles come with factory-installed body reinforcement bars, typically those that prioritize driving and handling performance. The factory-installed bars are designed with optimal considerations, so it is advisable not to arbitrarily remove or replace them.
Was this review help?
3
0
Share
More Forum Discussions

How many retake opportunities are there for the driving test?

There are 4 retake opportunities for each subject of the driving test. The age requirements for taking the driving test are: 1. Applicants for small cars, small automatic transmission cars, or light motorcycles must be between 18 and 70 years old; 2. Applicants for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery must be between 18 and 60 years old. Applicants for a motor vehicle driver's license must meet the driving license conditions stipulated by the public security department of the State Council. After passing the test, the traffic management department of the public security organ will issue the corresponding category of motor vehicle driver's license. Drivers must operate motor vehicles according to the vehicle type specified on their driver's license and must carry their motor vehicle driver's license with them when driving.
1
2
Share

How to Open a Mercedes Key to Replace the Battery?

To open a Mercedes key and replace the battery, follow these steps: 1. Flip to the back of the key and push the button to pull out the mechanical key; 2. Use a flathead screwdriver to pry open the gap at the back of the key, and the outer shell will open; 3. Remove the old battery and replace it with a new one; 4. After confirming the battery is properly installed, close the outer shell and reinsert the mechanical key. Mercedes models include: Mercedes GLS, Mercedes GLE, Mercedes GLC, Mercedes GLA, Mercedes CLA, etc. Taking the 2021 Mercedes GLS as an example, it is a mid-to-large-sized car with dimensions of length 5214mm, width 1956mm, height 1823mm, and a wheelbase of 3135mm.
19
0
Share

What are the precautions for a newly obtained driver's license?

Newly obtained driver's license precautions are: 1. Ensure all necessary documents are ready before driving, familiarize yourself with the vehicle's condition in advance, carefully check for any irregularities, and verify that the license plate is not obstructed; 2. Do not drive under the influence of alcohol, medication, fatigue, or without a license, and avoid driving in extremely poor visibility; 3. Always obey traffic instructions while driving, including traffic lights and road markings, and be mindful of yielding to other vehicles; 4. Pay attention to driving speed—do not drive too slowly as it may impede other vehicles and cause traffic congestion, nor too fast, especially in adverse weather conditions with low visibility, as it increases the risk of accidents.
18
2
Share

Has the Crown been discontinued?

The Crown has been discontinued. The Crown is a mid-to-large-sized car under FAW Toyota. Taking the 2018 Crown as an example, its body dimensions are: length 5020mm, width 1805mm, height 1480mm, wheelbase 2925mm, front and rear track 1540mm, and minimum ground clearance 140mm. The 2018 Crown features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 235PS, a maximum torque of 350Nm, and a maximum power of 173kW, paired with an 8-speed automatic transmission.
4
5
Share

How to Clean Cement Off a Car?

Cement on a car can be cleaned using the following methods: 1. Rinse the cement stains with clean water before they harden; 2. Spray white vinegar or a specialized cement cleaner onto the cement stains, wait for the stains to soften, then rinse with clean water; 3. Pour gasoline over the stains, wait for the car paint to soften, and then rinse the cement stains off with water. Methods for maintaining car paint include: 1. Wash the car only after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean any stains on the car body promptly; 4. Rinse the car with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze regularly.
15
2
Share

What is the difference between BorgWarner 4WD and quattro?

The differences between BorgWarner 4WD and quattro mainly lie in operation and performance. Here are the detailed explanations: 1. Different operations: The full-time four-wheel drive system is used to absorb the speed difference between the front and rear wheels, balancing the power distribution between the front and rear axles, allowing the vehicle to be driven by four wheels at any time. The BorgWarner four-wheel drive system is mainly divided into the on-demand 4WD TOD and the part-time 4WD ESOP. Both systems work in the form of a transfer case in conjunction with the transmission, where the transmission is responsible for gear shifting, and the transfer case is responsible for the distribution of front and rear power and the output of torque amplification. 2. Different performance: The full-time four-wheel drive system offers a good driving experience, smooth cornering, and strong off-road performance. In contrast, the BorgWarner four-wheel drive control program is more intelligent. By sensing the current driving state of the vehicle and cooperating with the front and rear EDL electronic differential functions, it more precisely controls the torque of each wheel, giving it excellent tracking ability whether in corners or on slippery roads.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.