Can body filler be applied directly to car paint?

What is the vibration standard for a 3000 rpm steam turbine?

For a steam turbine operating at 3000 rpm, a double amplitude vibration below 25um is considered good, while below 50um is acceptable. Consistency in vibration measurement positions is required: The standard specifies vibration measurements in three directions of the bearing: vertical, horizontal, and axial. During vibration measurements, the position for each measurement must remain consistent; otherwise, significant measurement errors may occur. Vibration amplitudes in all three directions must not exceed specified values: If the vibration amplitude in any of the three directions exceeds the specified value, the vibration condition of the unit is deemed unacceptable, and measures should be taken to eliminate the vibration. Critical speed vibration should not exceed 100um: Emergency stop measures also stipulate that if the vibration suddenly increases by 50um during operation, the turbine should be tripped immediately. Additionally, the maximum vibration at critical speed should not exceed 100um.

10

1

Share

What are the displacements of 330t and 380t?

330t has a displacement of a low-power version 2.0-liter turbocharged engine, while 380t has a displacement of a high-power version 2.0-liter turbocharged engine. The differences between 330t and 380t are as follows: Different torque: The maximum torque of the engine represented by 330 is 320N·m, while the maximum torque of the engine represented by 380 is 350N·m. There are usually letters following the numbers, such as TSI, which indicates that the vehicle is equipped with a turbocharged engine. Different engine power: The horsepower of 330 is around 186Ps, while the horsepower of 380 is around 220Ps, providing stronger power.

5

3

Share

Is the 4G93D engine a Mitsubishi engine?

4G93D engine is a Mitsubishi engine. Compact engine structural design: The compact structural design makes it smaller in size and lighter in weight compared to engines of the same displacement. High rigidity of engine components: The main components of the engine have high rigidity, and the main moving parts are designed with lightweight materials to reduce friction loss. Use of vibration-damping resin materials in the engine: By adopting efficient combustion methods such as rolling combustion and optimal fuel injection, along with technologies like enhancing the rigidity of the cylinder block and crankshaft and using vibration-damping resin materials for some parts, the engine noise is minimized.

17

4

Share

What is the function of the Lane Departure Warning System?

The function of the Lane Departure Warning System is: The Lane Departure Warning System provides intelligent lane departure warnings. When the driver unconsciously (without signaling) deviates from the original lane, it can issue an alarm 0.5 seconds before the lane departure occurs, or start vibrating the steering wheel to alert the driver about the current lane departure situation. This provides the driver with more reaction time, significantly reducing collision accidents caused by lane departure. Relevant information is introduced as follows: According to statistics, about 50% of car accidents are caused by vehicles deviating from the normal driving lane, mainly due to the driver being distracted, inattentive, or fatigued.

20

4

Share

What is the difference between full-speed adaptive cruise control and adaptive cruise control?

Differences between full-speed adaptive cruise control and adaptive cruise control: 1. Different speed limits: Full-speed adaptive cruise control can be used at any speed; adaptive cruise control can only be used above 40 km/h or 60 km/h. 2. Different nature: Full-speed adaptive cruise control does not require the driver to touch the accelerator or brake pedal during vehicle operation; adaptive cruise control assists the driver in driving and reduces fatigue. Relevant information is introduced as follows: Adaptive cruise control technology is based on active safety configurations, which require radar, ultrasonic, and infrared sensors to detect obstacles, pedestrians, and vehicles ahead. It must have an automatic braking function to ensure precise distance control.

10

1

Share

Can I cancel the insurance purchased at a 4S store and buy a new one after picking up the car?

Insurance purchased at a 4S store can be canceled and repurchased after picking up the car. Compulsory Traffic Insurance: This is a mandatory insurance required by the state. If not purchased, traffic police may impose fines upon inspection. Third-Party Liability Insurance: This insurance is used to compensate for losses caused by the vehicle owner to third-party personal injuries or fatalities. Vehicle Damage Insurance: This insurance covers losses to the vehicle itself caused by natural disasters and accidents. No-Deductible Insurance: An additional insurance that transfers the responsibility from the vehicle owner to the insurance company, reducing the owner's losses. It is advisable to purchase no-deductible insurance if both vehicle damage insurance and third-party liability insurance are bought.

4

1

Share

Can body filler be applied directly to car paint?

What is the vibration standard for a 3000 rpm steam turbine?

What are the displacements of 330t and 380t?

Is the 4G93D engine a Mitsubishi engine?

What is the function of the Lane Departure Warning System?

What is the difference between full-speed adaptive cruise control and adaptive cruise control?

Can I cancel the insurance purchased at a 4S store and buy a new one after picking up the car?

Can an 18-year-old apply for a B2 driver's license?

What is the fuel consumption per 100 kilometers for a 2.5L engine?

Can 215 Tires Be Replaced with 225 Tires?

Can a car pass on a 2-meter-wide road?