···
Log in / Register

Can Blue License Plate Trucks Enter Urban Areas?

1 Answers
KiraLynn
09/03/25 2:41am

Regarding whether blue license plate trucks can enter urban areas, the regulations vary by city. There is no nationwide unified rule, as each city formulates its own traffic restriction measures. In some cities, blue license plate vehicles without a permit are not allowed to enter urban areas at all; in others, non-local blue license plate vehicles are permitted. Military vehicles, police cars, fire trucks, school buses, ambulances, engineering rescue vehicles, and specialized road clearance and accident rescue vehicles from the traffic police department are exempt from restrictions. Additional information: 1. In some cities, local blue license plate vehicles require a permit, while non-local ones are prohibited from entering urban areas; in others, local blue license plate vehicles can enter freely, but non-local ones are barred; and in some cities, there are no restrictions on blue license plate vehicles. 2. Generally, the total mass of blue license plate trucks on the vehicle registration is below 4.5 tons. Here, ordinary trucks under 4.5 tons usually refer to blue license plate trucks with a length of less than 6 meters. These small blue license plate trucks have low requirements for driver's licenses, and drivers with a C1 license can operate them. Therefore, a freight qualification certificate is no longer required to drive such small blue license plate trucks.

Was this review help?
20
4
Share
More Forum Discussions

How to lubricate a squeaky clutch?

Methods for lubricating a squeaky clutch: 1. Noise caused by dry friction: Simply apply a small amount of grease to the springs and areas where friction occurs. 2. Damaged release bearing: Try applying grease to the bearings on both sides of the release shaft, clutch pedal shaft, universal joint, transmission spline shaft, shock absorber lower bracket, gearshift lever support, brake clearance adjustment arm, water pump bearing, fan bracket grease nipple, and leaf spring pin. Additional relevant information is as follows: Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission.
8
5
Share

Why Can Only 80% of Tire Insurance Be Claimed?

Tire insurance can only be claimed at 80% for the following reasons: Quality Guarantee Insurance: Quality guarantee insurance refers to liability caused by product quality issues. According to national regulations, tires are considered consumables, and individual damage is not covered by (any insurance company's) compensation scope. Therefore, they cannot be compensated, and there are no additional insurance options. However, if the issue is related to quality, at most, only 80% can be claimed. Liability Insurance: Liability insurance refers to the insured's responsibility to third parties. For example, human intervention causing a tire blowout is merely a 'single damage.' Many insurance companies do not have such a claim item, so no compensation is required.
9
3
Share

How thick is the top of the rear bumper?

The top of the rear bumper is generally less than two millimeters thick. Function of the rear bumper: The rear bumper is a crossbeam located below the taillights. In addition to maintaining its original protective function, the front and rear bumpers of a car also aim to achieve harmony and unity with the vehicle's body shape, as well as pursue lightweight construction. Nowadays, most car bumpers are made of polypropylene plastic. Manufacturing process: Generally, bumpers are made of modified PP material due to its advantages of balanced plasticity and rigidity, lightweight and thin properties, and low cost. Some bumpers made of other materials (such as fiberglass, carbon fiber, etc.) may be phased out due to poor environmental performance (non-recyclable) or high costs. Therefore, in the coming years, modified PP materials and increasingly mature thermoplastic elastomers (TPO) will dominate the production of car bumpers.
3
0
Share

Where is the engine of Changhe Q7 from?

BAIC Changhe Q7 is equipped with a 1.5-liter turbocharged engine across the entire lineup. Below is expanded information about BAIC Changhe: Engine of BAIC Changhe Q7: The 1.5-liter turbocharged engine in BAIC Changhe Q7 delivers 150 horsepower and a maximum torque of 200 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head. It is paired with either a 6-speed manual transmission or a CVT transmission. Configuration of BAIC Changhe Q7: BAIC Changhe Q7 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The CVT transmission paired with its engine is a structurally unique type of transmission. Inside the CVT transmission, there are two cone pulleys and a steel belt. The steel belt can move along the cone pulleys, allowing the transmission to vary speed and torque.
7
1
Share

What Does It Mean If the Radiator Frame of a Used Car Has Been Altered?

If the radiator frame of a used car has been altered, it indicates that the car has been involved in an accident. If only the radiator frame or some energy-absorbing collision components were damaged, and the overall condition of the vehicle is good without any damage to structural components like the frame rails, there should be no safety hazards or impact on driving performance. In such cases, the car is within an acceptable range, and purchasing a vehicle with a replaced radiator frame is reasonable. Below is some relevant information about radiator frames: 1. Material: There are three types of radiator frame materials available in the market: plastic, iron, or alloy. 2. Classification: Based on structure, they can be divided into integrated and segmented types. The integrated type is the most common form in the market, sometimes referred to as a "dragon gate frame." The segmented type is generally divided into three sections, connected via bolts or welding points.
1
3
Share

What is the brightness of halogen headlights?

Brightness The brightness of halogen lamps is 55W. Structure of halogen headlights: Halogen headlights are the most common type of car lights, and there's a reason they are so widely used—simple structure, low cost, and strong penetration. However, due to their low luminous efficiency, they are relatively dim and generate a lot of heat, earning them the nickname "candle lights." Advantages and disadvantages of xenon headlights: The advantages are high brightness, long lifespan, and low power consumption. The disadvantages include poor penetration and a certain warm-up time required to reach maximum brightness. Additionally, it's important to note that xenon lights are excessively bright and can easily affect the vision of oncoming drivers, so installing xenon lights must be accompanied by the installation of lenses!
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.