Can automotive spray paint be used?

2 Answers
VivianFitz
07/24/25 3:38am
Spray paint can indeed be used on cars, as it is designed for repairing scratches on vehicles, though its effect is certainly not comparable to that of baked paint. The adhesion of spray paint is much weaker than that of baked paint, and if the paint quality is poor, it may start peeling or flaking within less than a year. For small scratches or parts like the grille, side panels, and bumpers, spray paint can be used for surface repair. Visually, spray paint offers a better result than touch-up pens because the paint in spray cans is pressurized, allowing the paint to fully atomize when sprayed, resulting in a more natural-looking finish.
Was this review help?
4
3
Share
FinleyLee
08/10/25 11:12pm
Oh, automotive touch-up spray paint is definitely usable, especially for minor scratches or localized paint repairs. I've personally tried fixing scratches on my car's side mirror – just pick the right color brand and you can get it done quickly, saving both money and hassle. During operation, first sand the surface clean with sandpaper to ensure it's free of oil stains and rust, then maintain an even distance of about 20 cm when spraying. Apply several thin coats, wait for it to dry, and then polish. The key is proper surface preparation; otherwise, the paint may peel off quickly and fade when exposed to water or strong sunlight. This method is suitable for temporary fixes or when on a tight budget, but for large-area paint loss or critical parts like door edges, it's still recommended to go to a professional shop for better durability and more accurate color matching. DIY is fun and beginner-friendly, but don't expect perfection.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

What is the fuel tank capacity of the BMW 5 Series?

The fuel tank capacity of the BMW 5 Series is 70 liters. The size of the fuel tank measures a vehicle's ability to carry fuel, and the tank volume determines the driving range. For two cars with identical engines, the larger the fuel tank, the farther the car can travel. Below is a partial introduction to the BMW 5 Series: 1. Body dimensions: Taking the BMW 525i as an example, its body dimensions are 4841mm in length, 1846mm in width, and 1468mm in height, with a wheelbase of 2888mm, front track of 1558mm, and rear track of 1582mm. 2. Powertrain: The BMW 525i features a front-engine, rear-wheel-drive layout, with a top speed of 233 km/h, and is powered by an inline six-cylinder, four-valve engine.
8
1
Share

What Causes the Malfunction Indicator Light to Illuminate?

Here are the reasons why the malfunction indicator light may illuminate: 1. Sensor issues: When the coolant temperature, crankshaft position, air flow, intake air temperature, or oxygen sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data; 2. Maintenance problems: Irregular maintenance and poor driving habits can increase the operational burden on the engine; 3. Fuel quality issues: The fuel used in the car has specific octane ratings, and failure to use the required grade can cause engine wear; 4. Poor fuel mixture combustion: This can lead to engine carbon buildup or knocking issues, which are detected by the engine's oxygen sensor; 5. False alarms: These may occur due to minor collisions during driving, tampering with engine connectors, or temporary ECU signal interruptions.
17
3
Share

What is Full-Time Four-Wheel Drive?

Full-time four-wheel drive means that at all times, the vehicle is independently driven by all four wheels. In English, it is abbreviated as "AWD" (All-Wheel Drive) to distinguish it from 2WD (which includes FWD and RWD). Full-time four-wheel drive distributes driving force to all four tires through a flexibly connected central differential, and then via independent differentials on the front and rear axles. Unlike purely mechanical differential locks, the differential in full-time four-wheel drive can be either a viscous coupling or a multi-clutch type, but both allow for a speed difference between the front and rear wheels, as well as between the left and right wheels. Whether a vehicle has full-time four-wheel drive depends entirely on the construction of the transfer case. Below is relevant information: Disadvantages: It only starts transferring power to non-slipping tires after detecting slippage in a particular tire, which means the response can be slower. More importantly, these viscous or electronic differentials cannot completely lock the power distribution at 50:50 like a mechanical differential lock. Because of this, full-time four-wheel drive is often dismissed by hardcore off-road enthusiasts as "fake off-roading," unable to match the capabilities of part-time four-wheel drive in extreme conditions like climbing mountains or fording rivers. Advantages: Theoretically, it is the ideal driving method for vehicles, providing better tire grip, more effortless high-speed cornering, and easier handling, thereby enhancing both safety and performance. Since power is always distributed to all four wheels, when one wheel begins to slip, the system automatically intervenes to redistribute power to ensure optimal traction at all times. This system offers significant handling advantages on slippery surfaces. As a result, more and more SUVs and sedans adopt full-time four-wheel drive not just for off-roading but for the stability and active safety it provides, especially in high-performance cars. Section: Excellence and Safety
13
2
Share

At what temperature does the BMW N55 engine's cooling fan start to operate?

Water temperature generally reaches between 93-98 degrees Celsius for the fan to operate at low speed. Overheating caused by insufficient coolant: Water needs to be added, but to prevent engine damage, water should not be added immediately. Typically, the car's hood should be opened first, followed by the engine cover to allow ventilation and heat dissipation. Water should only be added after the coolant temperature has decreased. Water pump failure leading to overheating: This may be due to seized bearings or damaged impeller blades. The likelihood of seized bearings is low, and replacing the damaged impeller blades should resolve the issue. Blown fuse causing overheating: Alternatively, the thermostat switch may have blown. In this case, it is crucial not to turn off the engine. Instead, open the hood and use cold water to spray the car's radiator to rapidly lower the water temperature.
11
2
Share

What Maintenance is Required for a Car After Driving 40,000 Kilometers?

For a car that has driven 40,000 kilometers, the main maintenance items include changing the engine oil, three filters, and all vehicle fluids, along with some necessary routine inspections such as replacing brake fluid, transmission fluid, power steering fluid, and coolant. Additional information about car maintenance is as follows: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. The maintenance cycle is preset when the vehicle leaves the factory. A "wrench" symbol will appear at certain mileage intervals to remind the driver to perform maintenance in a timely manner. Typically, the maintenance cycle for a car is every 5,000 to 8,000 kilometers driven, and the factory-set cycle is usually longer than 8,000 kilometers.
12
5
Share

How to Conduct Annual Inspection for a New Car After Six Years?

New cars require annual inspection after six years, and the specific steps are as follows: 1. Upon arrival at the inspection station, the first step is an exterior inspection. The owner needs to park the vehicle in the designated area for exterior checks, prepare the fire extinguisher and triangular warning sign, and open the engine hood and trunk for inspection by the staff. During the exterior inspection, the staff will provide two forms to record the vehicle's chassis number, engine number, and other details, while also verifying the presence of safety equipment like the triangular warning sign and fire extinguisher. If the exterior passes inspection, the staff will sign off on the relevant section of the form. 2. After the exterior inspection, the staff will hand the forms back to the owner and direct them to the payment office to settle the fees. Once payment is completed, the owner must submit their ID card and vehicle registration to the staff, who will then enter the annual inspection details into the system. 3. The owner should then drive the vehicle to the inspection lane entrance and queue up. A technician will take over the vehicle and the forms, and the owner can proceed to the final photo area to wait. 4. If any issues are detected during the inspection, the staff will notify the owner, who must then address the problems and return for a re-inspection after repairs. For vehicles that pass inspection, the owner will receive the signed forms. At this stage, the owner should place the triangular warning sign and fire extinguisher behind the vehicle, and if the vehicle has a sunroof, the rear portion should be slightly raised for the staff to take photos. 5. Finally, the owner must submit the forms and compulsory insurance documents to the service counter for verification and data entry. The staff will then issue the annual inspection sticker, marking the completion of the entire process.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.