Can Auto Start-Stop Really Save Fuel?

2 Answers
AutumnDella
09/02/25 7:00am
Auto start-stop can save fuel. Here is the relevant introduction about auto start-stop: 1. Working Principle: The auto start-stop function automatically turns off the engine when the car is waiting at a traffic light or briefly stopped, and automatically restarts the engine when needed. Its working principle involves installing a reinforced motor with start-stop functionality on the engine. When the conditions for stopping are met, the engine shuts off, and when it's time to move forward, the motor issues a start command, enabling the engine to restart in the shortest possible time. 2. Advantages: The auto start-stop function can reduce fuel consumption and decrease exhaust emissions into the air. According to statistics, under normal circumstances, a car can save about 5% of fuel, and in congested road conditions, it can save up to 15% of fuel, contributing to energy conservation and environmental protection.
Was this review help?
5
1
Share
LePiper
09/15/25 2:14am
As an average urban car owner who frequently drives vehicles with auto start-stop in congested areas, I've noticed the engine automatically shutting off at red lights or temporary stops does effectively reduce idle fuel consumption. My monthly fuel usage has dropped by about 5%, translating to significant annual savings – especially in downtown areas with frequent stops. However, this technology has its drawbacks: the slight vibration or noise during restart can be annoying, and the repeated engine cycling in traffic jams gets on my nerves. Additionally, it puts extra strain on the battery and starter, potentially increasing maintenance costs. While the fuel-saving effect is real, it's not a perfect solution – adaptation based on driving habits is necessary. My recommendation: manually disable the system in chaotic traffic conditions to balance convenience.
Was this review help?
12
1
Share
Expand All
More Forum Discussions

What Causes the Engine Yellow Light to Illuminate in a Focus?

When sensors such as coolant temperature, crankshaft position, air flow, and intake air temperature are damaged or have poor contact, leading to signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine fault light. It is necessary to promptly visit a repair shop for inspection. Proper driving habits and regular car maintenance in daily life can reduce the occurrence of car faults. Below are the daily maintenance and operational precautions for vehicles. Daily vehicle maintenance: Regularly change the engine oil, replace the three filters (air, oil, and fuel), and periodically top up power steering fluid, brake fluid, and coolant. Frequently check the condition of engine oil, brake fluid, and antifreeze. Additionally, keep the engine clean by washing it regularly. Driving precautions: When starting a cold engine, allow it to idle for about a minute and a half to give it time to warm up. After parking, wait an additional half minute before turning off the engine. The engine remains at a high temperature after stopping, and immediately shutting it off causes the fan to stop, which is not conducive to engine cooling.
11
3
Share

What is the fuel tank capacity of the older Buick GL8 in liters?

2017 older Buick GL8 has a total of 8 models, with a fuel tank capacity of 70 liters. The vehicle is equipped with a 2.5L naturally aspirated engine and a 2.0T turbocharged engine, all models use a 6-speed automatic manual transmission (AT). Among the same class of vehicles, the 2022 Odyssey has a fuel tank capacity of 50 liters, the 2022 Elysion has a fuel tank capacity of 50 liters, and the 2021 Vito has a fuel tank capacity of 70 liters. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the automobile manufacturer is the volume from the bottom of the tank to the safety limit, and there is still a certain space from the safety limit to the tank opening. This space is to ensure that the fuel in the tank can expand when the temperature rises without overflowing the safety space of the tank. If the fuel is filled to the tank opening during refueling, the actual refueling amount will be larger than the calibrated fuel tank capacity. If the owner wants to know the remaining fuel in the tank, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the pointer is close to E, it means that the fuel is almost empty, and when it is close to F, it means that the fuel is sufficient.
18
5
Share

What is the function of tracks?

The main function of tracks is to increase the contact area and reduce ground pressure, enabling smooth operation on soft terrain. Tracks are flexible loops driven by the drive sprocket, surrounding the drive sprocket, road wheels, idler wheel, and return rollers. Tracks consist of track shoes and track pins, with the pins connecting the shoes to form the track loop. The ends of the track shoes have holes that mesh with the drive sprocket, while the middle section features guide teeth to align the tracks and prevent detachment during tank turning or side-slope driving. The ground-contact side has reinforced anti-slip ribs (commonly called tread patterns) to enhance the durability of the track shoes and the adhesion between the tracks and the ground. Tank tracks can be classified into two main types based on structure: metal pin hinge type and metal-rubber hinge type. The metal-rubber hinge type can be further divided into single-pin and double-pin variants. Metal pin-type tracks have a simple structure, but the direct dry friction between pins and pin holes leads to rapid wear and short service life. During tank maintenance, it's common to find track pins worn into a "candied hawthorn" shape, making them one of the vulnerable components. Metal-rubber hinge tracks feature multiple rubber sleeves vulcanized onto metal pins, press-fitted into the track shoe pin holes. This design eliminates direct friction between pins and holes, with only elastic torsion of the rubber sleeves during twisting. These tracks offer quieter operation, longer lifespan, albeit with more complex structure and higher cost.
1
4
Share

What causes the valve noise in Haval H6?

Haval H6 valve noise causes: 1. The gap between the hydraulic valve lifter and the cam (or valve seat), which is mostly caused by excessive wear of the hydraulic lifter, resulting in rapid oil pressure release inside the lifter and causing noise. The hydraulic lifter needs to be replaced; 2. Noise caused by too high or too low oil level in the crankcase. The engine oil level needs to be checked. Noise caused by dirty lifters requires cleaning the hydraulic lifters; 3. Noise caused by wear of the valve guide. The valve guide needs to be reamed and valves with thicker valve stems installed. Noise caused by too thin engine oil requires replacing the oil with the appropriate viscosity. The Haval H6 is the flagship model of the Haval brand. In terms of body dimensions, its length, width, and height are 4640mm, 1825mm, and 1690mm respectively.
8
3
Share

How many seconds does the BMW 525 take to accelerate from 0 to 100 km/h?

BMW 525 accelerates from 0 to 100 km/h in 8.6 seconds. The BMW 525 is positioned as a mid-to-large-sized sedan and adopts a front-engine, front-wheel-drive layout. In terms of body dimensions, the BMW 525 measures 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. For safety features, the BMW 525 comes standard with driver and front passenger airbags, front side airbags, front and rear head airbags, seatbelt reminder, passive pedestrian protection, rear child seat anchors, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, electronic stability control, and fatigue driving alert.
12
0
Share

What are the solutions for brake noise in Golf?

Solutions for brake noise in Golf: 1. If it's a screeching sound, first check if the brake pads are nearly worn out (the warning tab is making noise). If the pads are new, check for any foreign objects caught between the brake disc and pads. 2. If it's a dull sound, it's mostly an issue with the brake caliper, such as worn sliding pins or detached spring plates. 3. If it's a hissing sound, there could be multiple issues, including problems with the caliper, brake disc, or brake pads. Therefore, for driving safety, it is recommended to promptly visit a repair shop for inspection and handling if you encounter brake noise. The Golf is a classic compact hatchback family car launched by FAW-Volkswagen. In terms of body dimensions, it measures 4199mm in length, 1786mm in width, and 1479mm in height, with a wheelbase of 2578mm.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.