Can antifreeze of the same color be mixed?

1 Answers
DiCollin
07/25/25 10:46am
Antifreeze of the same color cannot be mixed; it is necessary to use the same brand of antifreeze. Different brands of antifreeze may have varying production formulations, and if mixed, chemical reactions may occur between multiple additives, rendering them ineffective. The basic indicators of antifreeze are the freezing point and boiling point. On the market, antifreeze is available with freezing points such as -15°C, -25°C, -30°C, and -40°C. It is generally advisable to choose an antifreeze with a freezing point at least 10°C lower than the lowest temperature in your region. Antifreeze replacement cycle: For vehicles that operate for long periods, such as taxis, high-quality antifreeze should generally be replaced once a year. For vehicles with shorter operating times, replacement can be done every two years or every 30,000 kilometers. To prevent excessive foam formation, which can reduce the heat exchange efficiency between the antifreeze and engine components, ensure that the product is within its validity period when adding it. Long-life antifreeze can have a validity period of up to three years. If suspended matter, sediment, or signs of deterioration or discoloration are found in the antifreeze, the system should be promptly cleaned and the antifreeze replaced.
Was this review help?
9
0
Share
More Forum Discussions

What does a total loss vehicle mean?

Total loss vehicle refers to an insured vehicle that is completely destroyed or severely damaged to the extent that it loses its repair value. In such cases, the insurance company will determine the vehicle as a total loss. Additional information: 1. Total loss vehicles can be traded: With the consent of the insurance company, total loss vehicles can be traded. The disposal method for total loss vehicles can be auction, and most total loss vehicles end up in the used car market. 2. Precautions: Total loss vehicles still have value, so factories can purchase and repair them on their own. When actual total loss is unavoidable, or when the residual value of the damaged goods plus the costs of rescue, sorting, repair, and continued transportation to the destination exceed the value of the goods upon arrival at the destination, it is considered a total loss.
7
5
Share

What to Pay Attention to After Driving Out of Deep Water?

It may cause short circuits in the car's wiring, poor contact, water ingress into the engine, and reduced lifespan, necessitating a vehicle inspection. The following are the impacts of driving through deep water: 1. Chassis corrosion: If the water is not too deep, just above the chassis and entering the cabin, it can cause corrosive damage to the fixed bolts at the bottom of the vehicle compartment used to connect external attachments, weakening their tensile fastening ability and, in severe cases, causing detachment. 2. Decreased body tightness: Sealing strips and mud-resistant rubber rings are attacked by sand and mud, oxidizing and hardening, leading to accelerated wear. While the vehicle may be fine when stationary, unusual noises or wind noise are likely to occur when driving.
3
0
Share

Is it normal for the rim to get scratched during tire repair?

It indicates that the repair shop's technicians are unskilled and unprofessional, and you can demand compensation. Here are some considerations: 1. First, check the rim's craftsmanship: Rim craftsmanship includes electroplating, polishing, wire drawing, high-gloss silver, and paint repair. 2. Next, assess the extent of the scratch: If the base paint is not exposed, there is no safety hazard, it only affects aesthetics and has no other impact, so you can choose not to repair the rim. However, if the rim is severely scratched, exposing the base paint, then repair is necessary. If left unrepaired for a long time, the scratched area will oxidize, wrinkle, gradually expand, and even rust and corrode.
12
5
Share

How long after touch-up painting can polishing be done?

It is generally recommended to wait one week after car touch-up painting before polishing. Purpose of car polishing: Car polishing is a step in the car detailing process where the vehicle is polished before waxing, glazing, or coating. This is because glazing or coating requires prior polishing, and only a finely polished car can achieve a mirror-like finish. This is an essential step for glazing. Effects of not polishing: Unpolished car paint will be uneven, and the glazing will last for a very short time, failing to provide long-term adhesion. In this case, it would be no different from just waxing. Therefore, polishing is usually performed within one week after touch-up painting.
15
2
Share

Is the power gap between the Avalon 2.0 and 2.5 significant?

Apart from differences in power and main configurations, the 2.5L fuel and 2.0L Avalon models are identical in exterior and interior design, both originating from the TNGA-K platform. The power differences are as follows: 1. Avalon 2.0L model: The Avalon 2.0L is equipped with a 4-cylinder naturally aspirated engine codenamed M20D, which is Toyota's latest-generation engine deployed in China, achieving a theoretical thermal efficiency of 40%, an industry-leading level. In terms of parameters, this engine delivers a maximum power of 131kW (178Ps) at 6600rpm and a peak torque of 210Nm between 4400-5200rpm. 2. Avalon 2.5L model: It offers ample power with a hybrid system, combining a 2.5L engine with electric motors, delivering a maximum output of 178 horsepower.
4
0
Share

Should You Steer Towards the Wider Side When Reversing into the Garage in Subject Two?

In Subject Two, when reversing into the garage, you should indeed steer towards the wider side. Here are some relevant tips for reversing into the garage in Subject Two: 1. Keep an eye on the rearview mirrors: During the reversing process in Subject Two, always pay close attention to both the left and right rearview mirrors. If you notice one side is wider, slightly steer the wheel in that direction to prevent the other side from crossing the line. Also, remember that when initially finding the right moment to fully turn the wheel, do it decisively without hesitation. 2. Maintain distance: As you fully turn the wheel and reverse, the rear of the car gradually enters the garage. Before fully entering, ensure the wheels are about 30cm away from the garage corner. Students should constantly observe through the rearview mirrors. If the distance is less or more than 30cm, adjustments must be made; otherwise, the car will definitely cross the line after entering the garage.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.