Can an SUV carry 500 kg of cargo?

What is the fuel tank capacity of the Buick Excelle?

The 2021 Buick Excelle offers 4 models, all with a fuel tank capacity of 44 liters. The 2021 Buick Excelle is equipped with either a 1.3-liter turbocharged engine or a 1.5-liter naturally aspirated engine, paired with an automatic transmission (AT), and all models feature front-wheel drive. In the same vehicle class, the 2022 Nissan Sylphy Classic 1.6XE manual comfort version has a fuel tank capacity of 50 liters, while the 2021 Ford Focus sedan 1.5L manual version has a fuel tank capacity of 53 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity. To check the remaining fuel, drivers can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient.

15

1

Share

Nissan Terra's Reputation and Fuel Consumption?

Nissan Terra's combined fuel consumption is 8.9-9.6L/100km. There are currently 6 models of Nissan Terra on sale: the two-wheel drive Elite Edition and two-wheel drive Leading Edition, with a fuel consumption of 8.9L/100km. The two-wheel drive Luxury Edition and two-wheel drive Intelligent Edition have a fuel consumption of 9.2L/100km. The four-wheel drive Luxury Edition and four-wheel drive Flagship Edition have a fuel consumption of 9.6L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 8.9-11.1L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits in the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once it is damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If they are not replaced for a long time, they will become dirty and send wrong information to the engine control unit, causing incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in vehicles with long service life, various faults are inevitable.

3

0

Share

What does the DOT on tires mean?

The DOT on tires stands for certification by the U.S. Department of Transportation. It is usually followed by a series of numbers and letters, which represent the tire's origin information and factory code. The last four digits indicate the tire's production date. The first two digits represent the production week, and the last two digits represent the production year. Below is some related information: 1. The 11-digit number and letters immediately following "DOT" represent the tire's identification number or serial number. DOT is divided into three levels: A, B, and C, with level C being the lowest, meeting only the minimum performance conditions set by the U.S. Department of Transportation (DOT). The other two levels exceed the DOT's standard requirements. 2. According to U.S. law, all tires sold in the U.S. market must pass DOT testing and have the DOT mark molded on the tire sidewall after certification. Tires without the DOT mark cannot be imported, produced, or sold in the U.S. market. 3. Currently, the tires produced by the company are only sold in the Chinese market and are not exported to the U.S., so the sidewall does not need to be molded with the DOT mark.

3

4

Share

What is the correct way to brake a motorcycle?

1. The correct way to brake a motorcycle is as follows: 1. When at high speed, the braking force on the front wheel must be greater than that on the rear wheel. 2. At high speed, the braking force on the front wheel must not cause the front wheel to lock up. 3. When braking uphill, the braking force on the front wheel can be appropriately increased. 4. When braking downhill, the braking force on the rear wheel can be appropriately increased. 5. During emergency braking, the braking force should be slightly less than the force required to lock the wheels. 6. On slippery roads, the rear wheel should be braked before the front wheel. Below is a summary: First, release the throttle, straighten the bike, use the front brake as the main brake and the rear brake as the auxiliary, apply the rear brake first, then the front brake, and combine it with engine braking. Never lock the brakes completely; allow the wheels to rotate slightly rather than slide. The specific approach should be adjusted based on road and vehicle conditions. Note: It is best to use both brakes together because the front brake is primarily designed to assist the rear brake in achieving the shortest braking distance. Using only the front or rear brake alone will not achieve the shortest stopping distance; combining both is necessary for optimal braking performance.

14

0

Share

What brand are Corolla tires?

Corolla's original high-end tires are from Dunlop and Michelin, while the standard configuration uses Bridgestone. Corolla tire specifications include 195/65-R15, 225/45-R17, and 205/55-R16. The functions of tires are as follows: 1. Support the entire weight of the vehicle and bear the load of the car. 2. Transmit traction and braking torque, ensuring adhesion between the wheels and the road. 3. Reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and early damage to automotive components.

13

4

Share

What are the differences between the new Audi A6L Elegance and Dynamic models?

New Audi A6L Elegance and Dynamic models differ in the following aspects: 1. Different body dimensions: The Elegance model measures 5038*1886*1475mm; The Dynamic model measures 5050*1886*1475mm. 2. Different tire specifications: The Elegance model comes with 225-55-R18 tires and 18-inch wheels; The Dynamic model is equipped with 245-45-R19 tires and 19-inch wheels. 3. Different curb weights: The Elegance model weighs 1800kg; The Dynamic model weighs 1820kg.

12

1

Share

Can an SUV carry 500 kg of cargo?

What is the fuel tank capacity of the Buick Excelle?

Nissan Terra's Reputation and Fuel Consumption?

What does the DOT on tires mean?

What is the correct way to brake a motorcycle?

What brand are Corolla tires?

What are the differences between the new Audi A6L Elegance and Dynamic models?

What are the hazards of engine overheating?

Can Motorcycle Exhaust Be Modified?

How to Unlock a Locked Steering Wheel on a Honda Fit?

How is insufficient car battery power indicated?